HDMI 1.4 Switches/Splitters/Extenders
Vanco HDMIEX50 HDMI Extender over Single Cat5e/Cat6 Cable
Extending an HDMI signal over long distances doesn't get much easier than this. The HDMIEX50 from Vanco allows you to transmit an HD audio/video signal up to 164 feet away using a single Cat5e or Cat6 Ethernet cable. It supports IR pass-through using the included IR cables, while HDMI Loop-out allows the transmitter to be split and cascaded onto multiple displays. Convenient EQ settings allow adjustment based on cable distance, and EDID settings enable management through the HDMI Loop-out or output. This unit supports full HD video up to 1080p@60Hz and is HDCP compliant.
PureLink UHD-120 1x2 Ultra HD/4K HDMI Distribution Amplifier
The PureLink UHD-120 1x2 Ultra HD/4K HDMI Distribution Amplifier splits an HDMI signal to send it simultaneously to two separate displays. It supports resolutions up to 1080p and 4Kx2K Ultra HD and is HDCP compliant. Built-in equalization and reclocking ensure optimal signal quality.
Ethereal HDMI Surge Protector
This HDMI Surge Protector is designed to protect against voltage spikes that might damage your connected HDMI components. It can withstand up to 8KV of voltage surge and offers protection on both input and output (protects both source and sink). It supports full 1080p 3D resolutions.
Zigen HDBaseT Receiver over Single Cat5e/6/7 up to 70m for HX-88 and HX-1616 HDBaseT Modular Matrixes
Using HDBaseT technology, the ZIG-HVX-70R from ZIGEN extends an HDMI signal up to 70 meters using a single Ethernet cable. It also transmits bidirectional control signals for ultimate convenience. It can be used as a stand alone solution or combined with matrix switch setups to extend the input or output cable distance.
This HDMI extender supports resolutions up to 1080p and 4Kx2K Ultra HD. It supports simultaneous transmission of RS-232 and IR signals from a control system, enabling remote control of source devices or displays.
Techlogix Networx TL-TP50-HDIR HDMI & IR over Shielded Twisted Pair Cable Extender -- 50m
HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.
The TL-TP70-HDIR replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR control signal embedding allow you to also transmit bi-directional IR commands with the HDMI stream.
In actual practice, this means you can use the TL-TP70-HDIR to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!
PureLink AV VPX IP Video Management Software
Designed to simplify and automate installation and monitoring of the VIP Series of transmitters and receivers from PureLink AV, this VPX IP Management Software enables automatic device recognition, advanced diagnostics, presets and excution schedules, and can automatically build the I/O device map or allow manual creation and editing. With a browser interface, you can enjoy convenience and easy access to the network via mobile devices like tablets.