Gang Size - 2

Vanco Slim Bulk Cable Wall Plate

Simplify your cable installation with the WP-SLIMBULK from Vanco. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The minimum clearance for this plate is 1-3/16” and it is wide enough to accommodate the head of a VGA cable. The low, flattened profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.

DataComm Recessed Bulk Cable Plate

Use DataComm Electronics recessed low voltage cable plates to install low voltage cables behind your flat panel TV, your amplifier or other audio/video devices. These recessed bulk cable plates are designed to be used with low voltage mounting plate brackets by any major manufacturer.

The recessed low voltage cable plates can be installed upright or upside down. Install the 45-0001/2 upside down when installing flat panel TV’s.

Determine the location of your flat panel TV, amplifier or audio/video device. Cut a hole in the wall and install the low voltage mounting plate bracket. Then simply pull your cables through the mounted low voltage mounting plate bracket and then through the DataComm Electronics recessed low voltage cable plate. Insert the DataComm Electronics recessed low voltage cable plate into your mounted low voltage mounting plate bracket and secure tightly with the wall plate screws.

Vanco WPBWW Bulk Cable Wall Plate

Simplify your cable installation with Vanco’s WPBW. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The low 1-1/4” profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.

Vanco White Decora Style Face Plate

Step Up to the Plate

Sometimes, when shopping for wall plates, you don’t find exactly what you’re looking for. It can be hard for manufacturers to offer every possibility- mainly because the possibilities are endless. One person may need coax, Ethernet, HDMI, and RCA while another wants nothing in the world more than a VGA, Optical, and RJ11 plate. Keystone plates are one option when it comes to custom wall plates, but they’re not the only choice you have. Decora wall plates were made famous by Leviton initially as a replacement for standard toggle light switches.

Decora the Halls

FireFold’s Decora-Style Face Plate can be used for the very same application, but they are also frequently used for low-voltage wiring. When combined with Decora inserts, the installer or homeowner can put together their ideal configuration. The WP-DECOR face plate has openings for the Decora insert of your choice. Inserts are available to accommodate between one and six keystone jacks each. We also offer a huge variety of home theater and networking keystone jacks that can be easily snapped into the insert ports. These plates follow industry standards, so they can be used with any inserts and keystones you already have.

Installing the WP-DECOR Decora-style face plate is simple. It fits over any standard low voltage bracket or box and attaches with the included color-matched screws. The smooth, glossy white finish helps it blend in easily with existing wall plates and décor, and the beveled edges ensure a clean and professional appearance. This plate is molded from dense, durable plastic and is backed by our signature lifetime warranty. Decora-style plates are also available from us with two and three insert openings.

Arlington Nail On Low Voltage Mounting Bracket

LVN Bracket

Install your low voltage cables in a fraction of the time with the Arlington LVN Nail-On Mounting Bracket. The non-metallic, non-conductive, plastic construction makes them perfect for Class 2 networking and audio-video cabling runs. Designed for bare wood studs in new construction areas, these brackets come with a pair of angled captive nails and arrive ready to install. Simply tap the nails into the side of the exposed stud and you’re done.

They include a molded loop for tying off wires and a side tab for added stability. The unique side-fastening nail-in process also increases accuracy by decreasing pushback. The LVN low voltage mounting bracket is for use with standard wallplates and faceplates. These nail-in style boxes are also available in two, three, and four-gang configurations. They are UL listed and CSA rated for low voltage use and are not compatible with electrical wiring.

Vanco Hinged Bulk Cable Wall Plate

Prepare for the unexpected with the 120617 bulk wall plate by Vanco. The patented design offers many advantages over a standard pass-through plate. A unique side-opening hinge allows the user to disconnect the top and bottom halves of this plate so it can be installed around a set of cables. This distinctive feature is especially useful when cables and equipment are already connected or when large connector ends such as VGA and DVI would ordinarily limit the number of cables that fit. The WP-HINGED attaches easily to any single gang low voltage box or bracket, and the pivoting joint requires no additional hardware. With a glossy, natural white shade, this bulk cable plate can create a professional look no matter the visibility.

DataComm Bulk Cable Wall Plate with Flex

DataComm's patented flex bulk cable wall plate provides an easy and convenient way to organize your cables while keeping a clean look to your install. It allows you to pass low voltage cables through the wall, behind your flat panel TV, amp, or other audio/video devices.

The center of the cable plate is made of a flexible plastic, which allows you to pass multiple cables (up to six) through the plate. The attached mounting wings fit snugly against any wall up to 1" thick and eliminate the need for an additional low voltage bracket.

Quest Wall Plate for Bulk Cables

Embrace versatility with the VHT, available from Quest. This bulk cable wall plate can be used at the beginning or end of an in-wall cabling run to create a clean, professional look without creating extra connections or requiring additional time. With a reversible opening, this plate can be changed from a traditional style to a recessed plate. The center spout section detaches with a little pressure so it can be flipped in seconds. Because the pass-through piece can be snapped into place after the wires have passed, the separation makes it easier to pull through cables with larger connectors. The VHT is compatible with any low voltage box or bracket and comes with a pair of matching screws.