Transceivers

Techlogix Networx Fiber Transceiver

TechLogix SFP and SFP+ transceiver modules adapt TechLogix fiber technology to different cable formats.

The TL-1GSFP-MM550 transmits 1G signals up to 550 meters (1,800 feet) over duplex multimode fiber.

1.25G SFP Transceiver MM, 550m

Cleerline™ SSF-SFP-MM1G transceiver is a high-performance, cost-effective module supporting data-rates of 1.25Gbps and 550m transmission distance with multimode fiber.

This SFP uses the 1000Base-SX standard, popular for short range connections.

The transceiver consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.

The transceivers follow the industry standards of the SFP Multi-Source Agreement (MSA) and SFF-8472, making them directly interchangeable with any networking device following industry standards.

1000BASE-SX SFP MMF E-Temp DOM Cisco Compatible

The GigaTech Products GLC-SX-MMD-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP optical transceiver is based on the Gigabit Ethernet IEEE 802.3 standard and is designed to be compliant with SFF-8472 SFP Multi-source Agreement (MSA). This module is designed for multimode fiber and operates at a nominal wavelength of 850nm.

Applications:

• 1.25GBd Gigabit Ethernet

Techlogix Networx 1GBASE-LX/LH SFP 1310nm DOM Transceiver

TechLogix SFP transceiver modules adapt TechLogix fiber technology to different cable formats.

The TL-1GSFP-SM20K transmits 1G signals up to 20 km (12.4 miles) over duplex single-mode fiber.

1.25G SFP Transceiver SM BiDi T:1310/R:1550nm, 20Km Max Reach, w/DDM

Bi-directional (BiDi) SFP transceivers are high performance, cost effective modules supporting dual data-rates of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF. These SFPs use Wavelength Division (WDM) technology, mixing two wavelengths simultaneously. 

This SFP module accepts 1 LC connector and must be used as a pair: SSF-SFP-SM1GBDA matched with SSF-SFP-SM1GBDB. 

The SSF-SFP-SM1GBDA consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. 

The SSF-SFP-SM1GBDB transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. 

The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA. 

1.25G SFP Transceiver SM, 20Km

Cleerline™ SSF-SFP-SM1G transceiver is a high performance, cost effective module supporting data-rates of 1.25Gbps / 1.0625Gbps and 20km transmission distance with single-mode
fiber.

The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.

The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

10G SFP+ Transceiver MM, 300m

Cleerline™ SSF-SFP-MM10G is a 10G SFP+ transceiver designed for multimode fiber (MMF) applications, offering high-speed data transmission at 10 Gigabit speeds. This module supports a maximum reach of 300 meters using 50/125 µm multimode optical fiber and operates at an 850nm wavelength. The SSF-SFP-MM10G is compliant with the 10GBASE-SR standard and is ideal for short-range data communication.

The SSF-SFP-MM10G features a low-power, hot-pluggable design with an 850nm VCSEL transmitter and a PIN photodetector, ensuring efficient data transmission. It offers a maximum link length of 300 meters on 2000 MHz/km MMF and supports operating temperatures from 0 to 70°C. The module's electrical interface is compliant with SFI specifications, and it includes advanced firmware for system encryption. Its all-metal housing provides superior EMI performance, making it a cost-effective solution for high-density port applications.

This transceiver is suitable for various applications, including 10GBASE-SR at 10.3125Gbps, 10GBASE-SW at 9.953Gbps, and other optical links. It is designed for use in data centers, enterprise networks, and high-speed storage area networks (SANs), ensuring reliable and efficient data communication. The SSF-SFP-MM10G's compliance with IEEE 802.3ae and MSA SFF-8431 standards ensures compatibility with a wide range of networking equipment, making it an ideal choice for upgrading and expanding network infrastructure.

SCP 10GBASE-LR SFP+ 1310nm DOM Transceiver

The F-SFP10G-SM transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432, and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L Digital diagnostics functions are available via a 2-wire serial interface.

The transceiver is alimiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant with the RoHS Directive 2011/65/EU.

1000Base-T SFP RJ45 Connector Cisco Compatible

The GigaTech Products GLC-T-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP module is based on the Gigabit Ethernet IEEE 802.3 and 1000Base-T standard and is designed to be compliant with SFF-8472 SFP Multi-source Agreement (MSA). This module is designed for copper wire cabling up to 100 meters.

Applications:

• 1.25GBd Gigabit Ethernet

1000BASE-LX SFP SMF E-Temp DOM Cisco Compatible

The GigaTech Products GLC-LH-SMD-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP optical transceiver is based on the Gigabit Ethernet IEEE 802.3 standard and is designed to be compliant with SFF-8472 SFP Multi-source Agreement (MSA). This module is designed for single mode fiber and operates at a nominal wavelength of 1310nm.

Applications:

• 1.25GBd Gigabit Ethernet

Cisco Compatible (GLC-SX-MM) GE SFP 1000MB SX Mini-GBIC 30-1301-02

The Cisco compatible GLC-SX-MM-OEM modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 µm multimode fiber links up to 550 m and on 62.5 µm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220m. It can support up to 1km over laser-optimized 50 µm multimode fiber cable.