Transceivers

1G BiDi SFP Transceiver Modules (Set) - Simplex Fiber

The majority of fiber optic cable installed for audio, video, network and control is two strand (duplex) count or greater. This is because most fiber optic electronics, including SFP modules, segregate send and receive signal transmission onto two separate fiber strands. 

Simplex (or one strand) fiber is typically relegated to telecommunications runs, such as ISP feeds outside of a building. However, from time-to-time simplex fiber finds its way into applications where multistrand is required, either from damaged cable or a previously installed or mis-specified cable. 

The TechLogix TL-1GSFP-BD SFP solves this problem by multiplexing duplex communication onto a simplex cable. 

Each TL-1GSFP-BD includes two matching transceivers that feature a single LC connection. The transceivers must be used in pairs and are compatible with standard 1G network switches, media converters and other 1G-based IP devices. 

For added versatility, the TL-1GSFP-BD is compatible with both single mode and multimode fiber. Single mode supports transmission distances up to 6.2 miles, whereas multimode supports transmission distances up to 492 feet.

Techlogix Networx 10GBASE-LR SFP+ 1310nm DOM Transceiver

TechLogix SFP and SFP+ transceiver modules adapt TechLogix fiber technology to different cable formats. The TL-10GSFPP-SM10K transmits 10G signals up to 10km (6.2 miles) over duplex single-mode fiber.

Cisco Compatible 10GBASE-SR Mini-GBIC Rev3

The Cisco compatible SFP-10G-LR-OEM modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).

10G SFP+ Transceiver SM BiDi T:1330/R:1270nm, 20Km Max Reach

Cleerline™ Bi-directional (BiDi) 10G SFP+ transceivers are high-performance, cost-effective modules supporting 20 km transmission distance with single-mode fiber. 

This SFP module accepts 1 LC connector and must be installed as a pair: SSF-SFP-SM10GBDA matched with SSF-SFPSM10GBDB. 

These single-mode transceivers are small form factor pluggable modules for duplex optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. The SFP+ 20-pin connector allows hot plug capability. 

Modules are designed for single-mode fiber and operate at a nominal wavelength of 1270nm or 1330nm. The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. 

Transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. 

10G SFP+ Transceiver SM BiDi T:1270/R:1330nm, 20Km Max Reach

Cleerline™ Bi-directional (BiDi) 10G SFP+ transceivers are high-performance, cost-effective modules supporting 20 km transmission distance with single-mode fiber. 

This SFP module accepts 1 LC connector and must be installed as a pair: SSF-SFP-SM10GBDA matched with SSF-SFPSM10GBDB. 

These single-mode transceivers are small form factor pluggable modules for duplex optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. The SFP+ 20-pin connector allows hot plug capability. 

Modules are designed for single-mode fiber and operate at a nominal wavelength of 1270nm or 1330nm. The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. 

Transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. 

25G SFP28 LR Transceiver SM 1310nm, 10Km reach, Dual LC

Cleerline™ SSF-SFP28-25GLR is a high performance 25G/28G LR single-mode and multi-rate SFP28 transceiver using 1310nm wavelength and reaching up to 10Km distance over 9/125um fibers. The module can be used for 25G Ethernet transmissions, and it is the building block of 100G single-mode fiber LR4 type transceivers.

The LR standard is used for medium and short-range fiber connections, due to increasingly popular single-mode fiber plant and very affordable costs. The SFP28 25G transceiver is backwards compatible with the SFP+ 10G rated transceivers.

The transceivers follow the industry standards of SFP Multi-Source Agreement (MSA) and SFF-8472, making them directly interchangeable with any networking device following industry standards.

25GBASE-SR SFP28 Module MMF Cisco Compatible

The GigaTech Products SFP-25G-SR-S-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP module is based on the 25G Ethernet IEEE 802.3by standard and is designed to be compliant with the SFP Multi-source Agreement (MSA). This module is designed for multimode fiber and operates at a nominal wavelength of 850nm.

Applications:

• 25GBASE-SR/SW Ethernet

10GBASE-LR SFP+ Module SMF Cisco Compatible

The GigaTech Products SFP-10G-LR-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP module is based on the 10G Ethernet IEEE 802.3ae standard and is designed to be compliant with the SFF-8431 SFP Multi-source Agreement (MSA). This module is designed for single mode fiber and operates at a nominal wavelength of 1310nm up to 10KM.

Applications:

• 10GBASE-LR/LW Ethernet
• 10GB Fiber Channel