Over CATx Extenders

Enable-IT 1-Port Gigabit Ethernet Extender Kit

The Enable-IT 860X PRO Black Box Gigabit Ethernet Extender is a Gigabit wire speed throughput Ethernet Extender.

World’s Fastest and Secure, copper Ethernet Extender period, Guaranteed!Designed & Made in the USA with quality and pride. The American-made Enable-IT 860X PRO Black Box Gigabit Ethernet Extender over copper uses industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy.We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap.Ethernet Extension Experts designs and manufactures the Enable-IT 860X PRO kit, along with its entire product line, in the USA that makes us more responsive to customer needs.We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.This Enable-IT 860X PRO Black Box Gigabit Ethernet Extender over copper is trusted Business Reliable Professional Grade Gigabit Ethernet Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.

Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 860X PRO kit used 1-pair copper wiring (CAT 2 Telephone wire all the way up to CAT 7 rated).

The 860X PRO Gigabit Ethernet Extender can support up to 9 CPE units on the same 1-pair of wire, and actually can run on just 1 physical wire!

Leverage any 1-pair of existing or new wiring that is contiguous all the way up to 3,000ft or 915m encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

Single port Gigabit LAN built into each end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

The PureLink AV HCE II Tx 4K HDMI over HDBaseT Transmitter is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

The PureLink AV HCE II Rx 4K HDMI over HDBaseT Receiver is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50-foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

Tired of being restricted by HDMI distance limitations in complex setups? Say goodbye to that frustration with the VIP-100 II HDMI over IP distribution system from PureLink AV. This transmitter can be combined with a compatible receiver to transmit over distances up to 364 feet, or 120 meters.

Get audio/video, RS-232 and IR extension coupled with matrix switching capability up to a 64x190 system to meet the needs of even the most complex and demanding setup. Point-to-many and many-to-point are also supported.

Enable-IT Gigabit PoE Extender Kit - Firefold

The Enable-IT 865XS PRO Gigabit PoE Extender kit is an ideal solution to install your IP surveillance cameras, WiFi access points, VoIP phones and other PoE devices where you need, not where you are limited to by false thinking LAN distance restrictions. It can operate up to 3,000ft / 915m from you power and data source and supports any PoE enabled WiFi Wireless Access Point, Security camera or other PoE powered equipment. This eliminates the need for your installers adding power supply outlets and associated AC power cabling, providing an affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure.

Using the provided High Powered 60W 56V Injector, a single (120V ~ 240V) IEC 320 C14 standard Country specific power cord input will deliver PoE power sufficient enough to deploy multiple 12V ~ 24V / 6W ~ 30W PoE devices anywhere you need to.

Keep in mind that all DC including (PoE) voltage drops over distance and thicker gauge wire will help this issue. As a rule of thumb you will lose up to 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power strength at distance due to impedance. Lower power strength increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use more pairs or wire or 18 gauge wiring as a dedicated DC power buss – like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our 865XS PRO Gigabit PoE Extender or PoE DSLAM that can power a 56V 60W PoE IP PTZ Camera at 4,000 ft away.

We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 865XS PRO Gigabit PoE Extender kit, along with its entire product line, in the USA that makes us more responsive to customer needs. We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.

This Enable-IT 865XS PRO Gigabit PoE Extender over copper is trusted Business Reliable Professional Grade Gigabit PoE Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

Quad port Gigabit PoE LAN switch built into the remote 4-port end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

Enable-IT Gigabit Ethernet Extender Kit 4-Port

The Enable-IT 860XS PRO Black Box Gigabit Ethernet Extender is a Gigabit wire speed throughput Ethernet Extender. World’s Fastest and Secure, copper Ethernet Extender period, Guaranteed!

Designed & Made in the USA with quality and pride. The American-made Enable-IT 860XS PRO Black Box Gigabit Ethernet Extender over copper uses industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy.

We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 860XS PRO kit, along with its entire product line, in the USA that makes us more responsive to customer needs. We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.

This Enable-IT 860XS PRO Black Box Gigabit Ethernet Extender over copper is trusted Business Reliable Professional Grade Gigabit Ethernet Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 860XS PRO kit used 1-pair copper wiring (CAT 2 Telephone wire all the way up to CAT 7 rated). The kit can support up to 9 CPE units on the same 1-pair wire, and actually can run on just 1 physical wire!

Leverage any 1-pair of existing or new wiring that is contiguous all the way up to 3,000ft or 915m encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

Quad port Gigabit LAN switch built into each end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

HDMI® Extender over Fiber with KVM USB Pass-through

The Evolution by Vanco EVEXFBRK1 HDMI Extender with KVM, bi-directional IR, and RS-232, extends 4K HDR video and audio signals up to 984ft/300M over multi-mode fiber optic cables, and 6.2mi/10km over single mode fiber optic cables and modules! USB 2.0 KVM allows for controlling a security NVR/DVR, computer, NAS system, or any other component that is controlled by USB with this extender. No need to run a separate line or extender just for KVM control! Bi-directional IR pass-through allows for source and/or display control. Also features RS-232 pass-through for additional control. For extending HDMI with 4K HDR resolution at an extreme distance, the EVEXFBRK1 is a great solution for any application.

The EVEXFBRK1 includes two units: transmitting unit (EVEXFBRK1-TX) and receiving unit (EVEXFBRK1-RX). The transmitting unit is used to capture the HDMI input with control signals and carries the signals via fiber optic cables. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. Both units require power.

Evolution HDMI over IP Transmitter/Receiver

The Evolution by Vanco EVOIPLITE HDMI over IP Transmitter/Receiver is a complete audio, video, and control product over ethernet system. As a whole, the system has the ability to send multiple sources to multiple displays along with IR and RS232 pass-through, analog and digital audio breakout in TX mode, video up to 1080P@60Hz, with POE up to 100m when connected to a POE enabled switch off of a single Cat6 cable. This one single unit can be set to transmit or receive signals. When connected to a network with internet, the EVO-IP Cloud allows for additional features such as scheduling events or maintenance, remote monitoring of a system including remote diagnostics and troubleshooting, as well as voice control capabilities with Alexa! With an IP-less installation option as well as any new sources/displays being discovered automatically within the system, the EVO-IP HDMI over IP system is the fast, easy, and cost effective solution for both residential and commercial installations.

HDMI Extender 4K 70m

The Evolution by Vanco EVEX4K70 HDMI Extender over single Cat6 with Digital Audio Breakout, HDMI Loop-out, IR, and PoE, extends 4K@60Hz, 4:4:4 Chroma, and HDR10 up to 230ft/70m. Vanco’s patented bi-directional Power over Ethernet (PoE) Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. The transmitter is equipped with an HDMI loop-out for local monitoring or use with other distribution products. The receiver features digital optical output to break multi-channel audio out to amplifiers for a better listening experience. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. In addition, bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR10, with options for connecting additional displays and breaking out audio, the EVEX4K70 is a great plug and play solution for connecting the latest components!

The EVEX4K70 includes two units: transmitting unit (EVEX4K70-TX) and receiving unit (EVEX4K70-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals over a single Cat6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals.

*NOTE – All specifications and ratings for the EVEX4K70 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieve rated distance, and to maximize resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.

BZBGEAR BG-VOP-MT is revolutionary 4K UHD HDMI over IP Multicast Transceiver with Video Wall & PoE support. Sold individually, each unit can be changed from a transmitter to a receiver at the flip of a switch. This scalable system allows you to build out custom HDMI matrix switching over IP. This product features a transmission distance up to 100m(328ft) in UHD 4K2K format. Users can readily extend UHD sources from any HDMI source to any location with a LAN connection. It features audio embedding and de-embedding for connection external audio devices. The integrated USB 2.0 hub provides KVM extension abilities. BG-VOP-MT is HDCP compliant and supports PoE, IR, and RS-232.
With broadcasting management software and Gigabit Ethernet network switch (supporting IGMP), BG-VOP-MT is a complete UHD video broadcasting solution for digital signage. It can transmit UHD HDMI video broadcasting over IP network. The broadcasting format can be Point to Point, Point to Many, and Multi-Casting. In plain English this means you can broadcast a single HDMI source to as many displays as you want simultaneously and even create custom video wall layouts.
The BG-VOP-MT is an ideal solution for video distribution, video walls, and digital signage. With only one part number to remember for transmitting, receiving, and processing, ordering and installation are greatly simplified.

Metra 1 X 4 HDMI® Splitter Extender

Supporting 1080P over category cable, the Metra Home Theater CS-1X4HDSPLEXT is a great way to share ah HDMI based source to 4 displays with category cable wiring.

ADDER Link X-DVIPRO - Adder Technology

Part of the ADDERLink^® X-DVI PRO range, the high performance X-DVI PRO digital video and USB extender enables you to locate your critical computing hardware in a secure and temperature controlled environment. Uncompressed digital video and audio is distributed in real-time and with zero latency, allowing the user to maintain an at-the-PC experience. The USB 2.0 interface ensures compatibility with a wide range of USB devices.

• Delivers uncompressed digital video with audio
• USB 2.0 Low and Full speed connection: to interface with a range of devices
• Exact content seen on the local monitor is distributed: up to 50m over a single CATx cable
• Energy efficient design: external power supplies are not needed

Note: This product is only compatible with other Adder branded products

ADDER View CATxIP 5000 - Adder Technology

ADDERView^® CATxIP 5000 product is a high density, fully featured KVM over IP switch enabling up to 5 simultaneous local, remote and global users to access and control computers at BIOS level. A combination of USB console support, global IP access and a full KVM feature set ensure high-performance, flexible switching of USB, video and audio signals. The product combines 4 non-blocking concurrent IP connections together with a local port (5 separate users) with control of up to 16 separate devices. The small form factor design enables two units to sit within 1U of rack space, supporting 32 computers and 10 sessions. Any type of server can be connected to when combining the ADDERView CATxIP 5000 with the ADDER® Computer Access Modules (CAM). This product is part of the CATx range.

• Serial Console Support: connection via CATx-CONSOLE CAM
• Global control of up to 16 multi-platform servers: local and remote access via LAN or WAN
• Simultaneous users: up to 4 via IP plus 1 local
• Connection options: CATx cabling or IP
• High performance USB, video and audio
• Security: through authentication and encryption
• Small form factor unit: two units per 1U of rack space
• Flexible Plug and Play installation: easy set up complemented by multi-platform support and flexible expansion

Note: This product is only compatible with other Adder branded products

ADDER View CATx 4000 - CATx Switch (16-24 Ports)

ADDERView^® CATx 4000 switch is a high density, small form factor KVM product providing 4 simultaneous users local and remote access to control of up to 24 multi-platform servers via CATx cabling. A combination of USB console support with a full KVM feature set ensure high-performance switching of USB, video and audio signals ideal for server room and desktop environments. Any type of server can be connected to when combining the ADDERView CATx 4000 with the ADDER Computer Access Modules (CAM). This product is part of the CATx range.

• Control of up to 24 multi-platform servers: local and remote access via LAN or WAN
• Secure connectivity: via CATx cabling
• High performance USB, video and audio
• Flexible Plug and Play installation: easy set up complemented by multi-platform support and flexible expansion

Note: This product is only compatible with other Adder branded products

ADDER View CATxIP 4000 - CATx IP Switch (16-24 Ports)

ADDERView^® CATxIP 4000 product is a high density, fully featured KVM over IP switch enabling up to 4 local, remote and global users to access and control up to 24 computers at BIOS level. A combination of USB console support, global IP access and a full KVM feature set ensure high-performance, flexible switching of USB, video and audio signals. Any type of server can be connected to when combining the ADDERView CATxIP 4000 with the ADDER Computer Access Modules (CAM). This product is part of the CATx range.

• Global control of up to 24 multi-platform servers: local and remote access via LAN or WAN
• Connection options: CATx cabling or IP
• High performance USB, video and audio
• Security: through authentication and encryption
• Flexible Plug and Play installation: easy set up complemented by multi-platform support and flexible expansion

Note: This product is only compatible with other Adder branded products

Enable-IT PoE Extender Kit 1-Port - Firefold

The Enable-IT 865Q PRO Ultra PoE Extender is the world’s only available solution to Extended Ethernet and Ultra High Power PoE in a complete solution that exceeds the IEEE distance limitations for all Ethernet equipment and 802.3af/at/bt Power Over Ethernet (PoE) Standards. The 865Q PRO enables the simple installation of a high powered PoE devices like Axis Q or other high power IP Cameras, Aruba and Cisco Access points up to 1,968ft (600m) from your LAN and Power Source. This is ideal for installing any PoE IP Security cameras or PoE WiFi Access Points.

This Ultra PoE Extender drives the reach of Ultra high power PoE and Ethernet to more than (6) six times the typical Ethernet distance limit of 328ft, up to 1,968ft (600m) distance. There is no substitute for our Expertise – Only Enable-IT 865Q solution can. Made in the USA with quality and pride – the only manufacturer to do so in this industry.

To increase the durability and extended use of the product providing maximum future technology protection, 865Q PRO Ultra PoE Extender have been designed to meet the challenge of modern switched LANs and allows you to add features and capacity as your network expands. The 865Q PRO Ultra PoE Extender Solution delivers full duplex Gigabit Ethernet up to 600MB/s throughput.

This is trusted Business Reliable Professional Grade Ultra PoE Extension without the high cost of repeaters. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment. Beware of Cheap Chinese “so called Business Use” (Amazon Home use) gear that is banned in the US due to proven hidden spyware.

Enable-IT 2-Port Outdoor Gigabit PoE Extender Kit

The Enable-IT 865W PRO Outdoor Gigabit PoE Extender is a Gigabit wire speed throughput PoE Extender.

World’s Fastest and Secure, copper Ethernet Extender period, Guaranteed!Designed & Made in the USA with quality and pride. The American-made Enable-IT 865W PRO Outdoor Gigabit PoE Extender over copper uses industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy.We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 865W PRO kit, along with its entire product line, in the USA that makes us more responsive to customer needs.
We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.This Enable-IT 865XW PRO Outdoor Gigabit PoE Extender over copper is trusted Business Reliable Professional Grade Gigabit Ethernet Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 865W PRO Outdoor Gigabit PoE Extender kit uses 4-pair copper wiring (CAT 2 Telephone wire all the way up to CAT 7 rated). The 865W PRO Outdoor Gigabit PoE Extender can support up to 9 CPE units on the same 4-pair of wire.

Leverage any 4-pair of existing or new wiring that is contiguous all the way up to 3,000ft or 915m encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

Dual port Gigabit LAN built into each end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

Enable-IT 1-Port Gigabit PoE Extender Kit

The Enable-IT 865X PRO Black Box Gigabit PoE Extender is a Gigabit wire speed throughput PoE Extender. World’s Fastest and Secure, copper (Power over Ethernet) PoE Extender period, Guaranteed!

Designed & Made in the USA with quality and pride. The American-made Enable-IT 865X PRO Black Box Gigabit PoE Extender over copper uses industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy.

We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap. Ethernet Extension Experts designs and manufactures the Enable-IT 865X PRO kit, along with its entire product line, in the USA that makes us more responsive to customer needs.We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own Aerospace Certified Quality AS9100D US West coast facilities.

This Enable-IT 865X PRO Black Box Gigabit PoE Extender over copper is trusted Business Reliable Professional Grade Gigabit PoE Extender without the high cost of fiber or un-secure wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The Enable-IT 865X PRO kit uses 4-pair copper wiring (CAT 2 Telephone wire all the way up to CAT 7 rated). The 865X PRO Gigabit PoE Extender can support up to 9 CPE units on the same 4-pair of wire.

Leverage any 4-pair of existing or new wiring that is contiguous all the way up to 3,000ft or 915m encrypted and secure, effectively saving you thousands in labor, administration, and security. Think fiber is cheap? Have you ever priced or paid for fiber troubleshooting? Think again.

Single port Gigabit LAN built into each end coupled with industrial strength components to survive harsh temperature extremes delivers superior performance, value and capabilities no other competitor can touch.

Enable-IT Outdoor Gigabit Ethernet Extender Kit 2-Port

The Enable-IT™ 860W PRO IP68 rated Outdoor Gigabit Ethernet Extender delivers real Gigabit Ethernet throughput up to NINE times further than the IEEE 802.3 specifications for Ethernet LAN limits of just 328 feet and is the highest-throughput encrypted and Secure Ethernet Extender on the planet bar none!

This is trusted Business Reliable Professional Grade Ethernet Extension without the high cost of fiber or unsecured wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment.
Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.

The 860W PRO IP68 rated Outdoor Gigabit Ethernet Extender can extend your Ethernet all the way up to 3,000ft / 915m, effectively saving you thousands in labor, administration, and security. What’s more, it achieves these distances at a throughput no other Ethernet extension solution can match and at a cost, quality and reliability our “Made in China” competitors cannot match.

Made in the USA with quality and pride – the only manufacturer to do so in our industry we started.

The American-made 860W PRO IP68 rated Outdoor Gigabit Ethernet Extenders are also very easy to install and ready to work in most any environment. The 860W PRO IP68 rated Outdoor Ethernet Extender uses industry LAN standard RJ-45 (8-pin) connectors.

Dual port Gigabit Ethernet switch built into the remote end coupled with industrial strength components to survive harsh temperature extremes delivers twice as much value and capabilities no other competitor can touch. IP68 Casing comes with 2 output ports – optional 3rd or 4th port can be added on request before ordering.

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP70-HDC replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.

In actual practice, this means you can use the TL-TP70-HDC to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

Techlogix Networx Control Cable Extender

The TechLogix TL-TP100-HDC2 revolutionizes high-bandwidth HDMI signal distribution by leveraging HDBaseT technology to transmit 18G HDMI signals, including HDR and 4K@60 4:4:4, up to 100m (330 ft.) over standard twisted pair cabling.

The system works by lightly compressing signals above 10G for twisted pair transport, and then uncompressing the signal at the destination end.

Flexible options for ARC (Audio Return Channel) allow the receiver to accept HDMI, analog, or digital optical. The transmitter can output the audio on HDMI, analog, or digital optical outputs.

Additional built-in features such as flexible power with Port-Saver™ protection, IR and RS232 signal distribution, and Ethernet pass-through make the TL-TP100-HDC2 extremely powerful and extremely flexible.

Techlogix Networx Twisted Pair Cable Extender

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP40-HDC2 replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 130 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.

In actual practice, this means you can use the TL-TP40-HDC2 to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

HDBaseT™ 4K@60Hz, 4:4:4 Chroma, HDR Extender

The Vanco HDBT4K50 HDBaseT 4K@60Hz, 4:4:4 Chroma, HDR Extender with Bi-directional IR, and Power over Cable (PoC) extends 4K/60Hz, 4:4:4 with HDR along with audio, at a distance of up to 164ft/50m over a single Cat5e/6 cable. Also able to pass 1080p/60Hz up to 230ft/70m. Power over Cable (PoC) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. In addition, bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR, the HDBT4K50 is a great plug and play solution for connecting the latest components! The HDBT4K50 includes two units: transmitting unit (HDBT4K50-TX) and receiving unit (HDBT4K50-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The HDBT4K50 offers the most convenient solution for 4K extension over a single Cat5e/6 with Power over Cable, and is the perfect solution for any application.

The PureLink AV HCE II Tx/Rx 4K HDMI over HDBaseT Extension System is designed for in-wall cable installations. It allows you to extend HDMI signals past the typical 50 foot maximum using Ethernet cable. Cat6A or Cat7 Cables are recommended for maximum performance.

The HCE II supports embedded lossless audio formats, bi-directional IR signals, and HDCP-protected content. The ultra slim design makes for a compact, discreet installation.

BZBGEAR 1X4 4K 18Gbps UHD HDMI HDBaset Splitter

The BG-UDA-E14 is a 1x4 4K HDBaseT splitter/extender kit. Supporting resolutions up to 4K@60Hz, users can extend HDMI sources over category 6 cabling at distances up to 390 feet, or up to 490 feet at 1080P@60Hz with the included HDBaseT extenders. With the ability to connect to one local and four remote displays, this unit is ideally suited for use in restaurants, sports bars, retail spaces, and auditoriums.

Connectivity and Features

The BG-UDA-E14 supports a maximum resolution of 4K@60Hz 4:4:4. Compliant with HDMI 2.0b, HDCP 2.2, and HDCP 1.x, the transmitter offers EDID management to eliminate HDMI connection problems. The transmitter is equipped with an HDMI loop out connection for connection to a local display. One digital coax and one analog audio phoenix connector provide audio extraction from the source for connection to an external sound system.

Each receiver features Power over Ethernet, eliminating the need for a power supply at the display-end and enabling a clean installation. Each receiver has a 3.5mm stereo output for connection to a local sound source. The slim design of the receivers helps them fit behind the displays, and each one is equipped with RS-232 passthrough and bi-directional IR passthrough for integration with control systems.

BZBGEAR 1X8 4K 18Gbps UHD HDMI HDBaset Splitter

The BG-UDA-E18 is a 1x8 4K HDBaseT splitter/extender kit. Supporting resolutions up to 4K@60Hz, users can extend HDMI sources over category 6 cabling at distances up to 390 feet, or up to 490 feet at 1080P@60Hz with the included HDBaseT extenders. With the ability to connect to one local and eight remote displays, this unit is ideally suited for use in restaurants, sports bars, retail spaces, and auditoriums.

Connectivity and Features

The BG-UDA-E18 supports a maximum resolution of 4K@60Hz 4:4:4. Compliant with HDMI 2.0b, HDCP 2.2, and HDCP 1.x, the transmitter offers EDID management to eliminate HDMI connection problems. The transmitter is equipped with an HDMI loop out connection for connection to a local display. One digital coax and one analog audio phoenix connector provide audio extraction from the source for connection to an external sound system.

Each receiver features Power over Ethernet, eliminating the need for a power supply at the display-end and enabling a clean installation. Each receiver has a 3.5mm stereo output for connection to a local sound source. The slim design of the receivers helps them fit behind the displays, and each one is equipped with RS-232 passthrough and bi-directional IR passthrough for integration with control systems.

Evolution Uncompressed 4K HDBaseT Extender

The Evolution by Vanco EVEXHDB3 HDBaseT 3.0 extender offers multiple options for pass-through control, and audio including eARC and ARC, along with PoH while being able to extend uncompressed 4K with HDR up to 164ft/50m over a single Cat6 or up to 328ft/100m using Cat6a/7. Control signals include bi-directional IR pass-through to control IR sources, either way, bidirectional USB for KVM pass-through to control sources with a keyboard and mouse, and RS-232 pass-through for 3rd party control. Audio options include the ability to embed audio from a separate audio source, de-embed or extract audio from the HDMI signal, as well as eARC (Enhanced Audio Return Channel) and ARC (Audio Return Channel). In addition, the EVEXHDB3 allows for 1Gb ethernet pass-through. A great solution when trying to extend a network for streaming or control along with the audio and video signals over a single Cat6/6a/7 cable. The transmitting unit is equipped with an HDMI loop-out, to connect to a local display, combine with another HDMI distribution product, or extract audio. Power over HDBaseT (PoH) Technology transmits power over Cat6/6a/7, allowing either the Transmitter or Receiver to be powered without the use of a power supply. For extending uncompressed 4K with HDR, along with checking multiple boxes for control and audio options and more, the EVEXHDB3 is the perfect solution for any application.

The EVEXHDB3 includes two units: transmitting unit (EVEXHDB3-TX) and receiving unit (EVEXHDB3-RX). The transmitting unit is used to capture the HDMI input with additional signals and carries the signals via a single Cat6/6a/7 cable. The receiving unit is responsible for equalizing the transmitted HDMI signals and reconstructing other signals.

*NOTE – All specifications and ratings for the EVEXHDB3 have been tested and confirmed using Cat6 and Cat6a cabling. Cat5e is not recommended.

HDBaseT HDMI® Extender 150M

Send 4K/60, HDR HDMI signals and bi-directional US type IR signals up to 120 meters (394 feet) and 1080p up to 150 meters (492 feet). Includes RS232 pass though for easy control signal distribution. Using the latest in proprietary DSC technology we are now able to offer an even better image quality than ever before giving trained eyes a run for their money to discern the difference between native or not video.

HDMI KVM Extender 4K/60Hz HDR 230ft/70m

The Evolution by Vanco EVEXKVM3 HDMI Extender over single Cat6 with Digital Audio Breakout, HDMI Loop-out, KVM, and PoE, extends 4K@60Hz, 4:4:4 Chroma, and HDR10 up to 230ft/70m. USB pass-through allows for controlling a security NVR/DVR, computer, NAS system, touch screen display, or other components that are controlled by USB with this extender. No need to run a separate line or extender just for USB control! Vanco’s patented bi-directional Power over Ethernet (PoE) Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. The transmitter is equipped with an HDMI loop-out for local monitoring or use with other distribution products. The receiver features digital optical output to break multi-channel audio out to amplifiers for a better listening experience. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR10, with options for connecting a keyboard, mouse, and other USB peripherals, the EVEXKVM3 is a great plug and play solution for connecting the latest components!

The EVEXKVM3 includes two units: transmitting unit (EVEXKVM3-TX) and receiving unit (EVEXKVM3-RX). The transmitting unit is used to capture the HDMI input with KVM signals and carries the signals via one cost effective Cat6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing KVM signals. The EVEXKVM3 offers the most convenient solution for HDMI extension over a single Cat6 with Power over Ethernet, and is the perfect solution for any application.

NOTE: – All specifications and ratings for the EVEXKVM3 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieve rated distance, and to maximize resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.

Evolution 4K HDR 1×4 HDMI Splitter over Cat6 Cable

The EV4K7014 is an HDMI splitter that allows one HDMI input to be split and sent to up to five displays simultaneously. With four outputs over UTP, and one output over HDMI, the EV4K7014 allows for a local display connected, or to daisy chain additional units to gain more outputs. The EV4K7014 includes four receivers (EV4K7014-RX) as a kit, which are PoE, and do not require any power supplies at the display end. Extends 4K@60Hz 4:4:4 with HDR10 and IR control up to 230ft/70m over a single Cat6 cable. IR accessories are included to allow IR pass-through for controlling the source at each UTP display location. For splitting and distributing one single source to multiple displays, while extending over Cat6, the EV4K7014 is a great solution for any application with the ability to expand.

*NOTE - All specifications and ratings for the EV4K7014 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieving rated distance, and maximizing the resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.

9×9 4K UHD Seamless HDMI Matrix Switcher

The BG-4K-VP99PRO is a highly versatile HDMI matrix switcher/video wall processor/ multiviewer, perfect for professional AV installations. Offering exceptional connectivity with 9 HDMI inputs, outputs, and loopouts, it extends HDMI signals up to 70 meters over CAT5. With support for resolutions up to 4K60Hz 4:4:4 and advanced video processing, it enables seamless switching between video sources, 3x3 video wall creation, and the display of up to 9 sources on one screen. Balanced audio extraction and multiple control options ensure an immersive experience, making it ideal for presentations and conferences. This award-winning product offers a future-proof design with HDCP compliance and firmware updates via a micro-USB port, making it a comprehensive solution for professional AV setups.

UNPARALLELED CONNECTIVITY AND QUALITY

The BG-4K-VP99PRO offers an impressive array of connectivity options to cater to your diverse needs. With 9 HDMI inputs, 9 HDMI loop outs, 9 HDMI outputs, and 9 DSC outputs featuring Power over Cable (POC) support, seamless integration with multiple sources, displays, and audio systems is guaranteed. Additionally, for large-scale AV projects and installations, all HDMI sources can be extended up to 70m(229ft) over CAT5/6/7.

Delivering stunning visuals with exceptional clarity and color reproduction, the BG-4K-VP99PRO supports resolutions up to 4K60Hz 4:4:4. Its impressive bandwidth of 18Gbps ensures the smooth transmission of high-quality content.

SEAMLESS CONNECTIVITY AND FUTURE-PROOF DESIGN

Built-in EDID settings optimize communication between your source devices and displays, ensuring a seamless and reliable connection. HDCP 2.2/1.4 compliance guarantees compatibility with a wide range of devices while protecting your content against unauthorized duplication. Stay up-to-date with the latest features and improvements through the convenient micro-USB port, enabling firmware updates and future enhancements. Enjoy precise and visually appealing video wall configurations with screen edge adjustments. Expand your creative possibilities with 180° rotation and mirror functions offered by the BG-4K-VP99PRO.

ADVANCED VIDEO PROCESSING CAPABILITIES

The BG-4K-VP99PRO offers a range of advanced video processing capabilities, including video signal seamless switching, video wall creation, multiview, and preset settings. Seamlessly switch between video sources for uninterrupted viewing experiences. Create captivating video walls with a maximum configuration of 3x3 screens, allowing you to showcase content across a larger canvas. Display up to 9 sources on a single screen. Save and recall your preferred configurations effortlessly with the matrix switcher’s support for preset settings.

IMMERSIVE AUDIO AND USER-FRIENDLY CONTROL

Experience immersive audio alongside stunning visuals with the BG-4K-VP99PRO's balanced audio extraction support. Ideal for professional presentations, conferences, and professional AV installations, this feature ensures a complete sensory experience.

Installation and control are made convenient and flexible with multiple options. Take advantage of panel buttons, IR remote control, TCP/IP control, RS232 commands, and the BG-SWITCH-CONTROL app, a free BZBGEAR proprietary matrix switcher control software for Windows, Mac, iOS, and Android to easily manage and adjust the matrix switcher’s settings to suit your requirements.

INTERFACES

4×4 4K UHD Seamless HDMI Matrix Switcher/Video Wall Processor/MultiViewer Over Cat5/6/7 with 4xReceiver Kit

Introducing the BG-4K-VP44PRO: Your Ultimate 4x4 HDMI 2.0 CAT5/6/7 Seamless Matrix. Experience the next level of video distribution with the BG-4K-VP44PRO, a versatile all-in-one solution that's redefining the audiovisual landscape. Packed with advanced features like video wall and multi-view modes, this device unleashes a new era of flexibility, empowering your audiovisual setup with unmatched signal extension capabilities for even the most expansive spaces. Its sophisticated audio matrixing ensures crystal-clear sound, while the Power over Cable (PoC) functionality eliminates cable clutter, streamlining your setup and providing a cleaner, more efficient solution. Upgrade your AV setup today with the BG-4K-VP44PRO and elevate your entertainment experience to new heights.

CONNECTIVITY AND QUALITY

Extend your HDMI 2.0 signals up to an impressive 70m(229ft) using a single CAT5/6/7 cable. Enjoy the flexibility to position your devices exactly where you desire, without compromising on signal quality. Immerse yourself in stunning visuals and crystal-clear audio, whether it's for a home theater, corporate environment, or event space.

The BG-4K-VP44PRO's audio matrix capabilities offer unparalleled versatility. Seamlessly distribute audio signals to multiple zones or rooms, creating the perfect soundscape throughout your venue. Host unforgettable events, deliver impactful presentations, or enjoy your favorite music with a level of control that ensures every corner of your space is filled with pristine sound.

Equipped with HDMI inputs, RJ45 outputs, and an HDMI loop-out functionality, this seamless matrix provides extensive connectivity options. Immerse yourself in the brilliance of 4K resolution, 4:4:4 color sampling, and 8-bit color depth, all while maintaining HDCP 2.2 compliance and efficient EDID management. Experience your audiovisual content with remarkable clarity, accuracy, and fidelity, captivating your audience like never before.

SIMPLE INSTALLATION AND CONTROL

Installing and controlling the BG-4K-VP44PRO is a breeze. With multiple control options—including panel buttons, remote control, RS232, TCP/IP, and the BG-SWITCH-CONTROL app, a free BZBGEAR proprietary matrix switcher control software for Windows, Mac, iOS, and Android—you can effortlessly manage the device according to your preferences. The inclusion of PoC functionality optimizes power distribution to receiver units, simplifying the installation process and enhancing overall system reliability. Say goodbye to cable clutter and hello to a streamlined setup that maximizes efficiency without compromising performance.

INTERFACES

4K UHD HDMI Video Wall Processor/Switcher with IP/Audio/RS-232

Introducing the BG-UHD-VW24 HDMI 2.0 video wall controller from BZBGEAR, an innovative solution for all your video wall processing needs. This powerful controller features 2 HDMI inputs and 2 HDMI loop outs, as well as 4 HDMI scaling outputs, providing seamless and efficient video processing.

With support for resolutions up to 3840x2160@60Hz, this HDMI 2.0 device ensures stunning video quality and optimal viewing experience. The BG-UHD-VW24 also supports HDCP 2.2, ensuring that it is fully compatible with the latest content protection standards.

One of the unique features of the BG-UHD-VW24 is its ability to compensate for bezels in two modes, allowing for optimal display of content across multiple displays. Ability to control resolutions of the output displays and configure the brightness, contrast, saturation, and sharpness of each output further enhancing the viewing experience. Additionally, the controller provides the flexibility of 180° display rotation.

The BG-UHD-VW24 is controllable via PC software, webGUI, and RS232, giving users the freedom to choose the most convenient control option. The device also includes a de-embedding audio feature, which allows audio to be sent to an Analog L/R audio output via 3.5mm Stereo Jack or a balanced audio output port using a 5-pin phoenix connector.

Overall, the BG-UHD-VW24 video wall controller from BZBGEAR is an excellent choice for anyone looking for a reliable, efficient, and versatile video processing solution. Whether you're in the digital signage business or require video processing to improve your entertainment systems, the BG-UHD-VW24 is the perfect choice.

INTERFACES

1. CONTROL:
   RS232: Loop out RS232-CTL control command.
   RS232-CTL: External RS232 control, Baud Rate: 57600, Data Bits: 8, Parity: None Stop Bits: 1.
   LAN: Network port for TCP/IP control. Connect to an active Ethernet link with an RJ45 cable.
2. SERVICE: Firmware update port.
3. AUDIO OUTPUTS:
   Analog L/R audio output: 3.5mm Stereo Jack. 20Hz ~ 20kHz, 1.5Vrms max.
   BALANCED OUT: Balanced audio output port. 5-pin phoenix connector, 20Hz ~ 20kHz, 1.5Vrms max.
4. GND: Ground the product housing.
5. 12V/3A: DC 12V/3A power supply port.
6. OUTPUTS: HDMI output for the video wall.
7. LOOP OUT: Loop out the HDMI A/B signal to a local display connected to each output.
8. INPUTS: Connect HDMI source devices such as a DVD player or gaming console with an HDMI cable.
9. Power LED indicator: The power LED will illuminate when the unit is powered on.
10. INPUT LED indicators: The LED will illuminate when the corresponding HDMI input port is connected to an active HDMI source device.
11. LOOP LED indicators: The LED will illuminate when the corresponding LOOPOUT port is connected to an HDMI display device.
12. OUTPUT LED Indicators: The LED will illuminate when the corresponding HDMI output port is connected to an HDMI display device.

EVO-IP Control Box

Allows for AV distribution, video wall and digital signage capability, control, and more. Only one unit needed for each application.

HDBaseT™ 4K@60Hz, 4:4:4 Chroma, HDR Extender 164ft/50m

The Evolution by Vanco EVEX4K50 HDBaseT 4K@60Hz, 4:4:4 Chroma, HDR Extender with Bi-directional IR, and Power over Cable (PoC) extends 4K/60Hz, 4:4:4 with HDR along with audio, and RS232 at a distance of up to 164/50m over a single Cat5e/6 cable. Also able to pass 1080p/60Hz up to 230ft/70m. Power over Cable (PoC) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. In addition, RS-232 and bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR, the EVEX4K50 is a great plug and play solution for connecting the latest components!

The EVEX4K50 includes two units: transmitting unit (EVEX4K50-TX) and receiving unit (EVEX4K50-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EVEX4K50 offers the most convenient solution for 4K extension over a single Cat5e/6 with Power over Cable, and is the perfect solution for any application.

USB 3.2 Extender Over HDBaseT with USB-C

The EVEXUSB32 supports up to four USB 3.2 devices, such as webcams, keyboards, mice, and storage devices using USB-A and USB-C connections. Power over HDBaseT (PoH) technology allows for a single power supply on either end while two 1.5A ports (USB-A & USB-C) and two 1A ports (USB-A) provide power to the connected devices. With its reliable transmission and versatile connectivity options, the EVEXUSB32 supports corporate, medical, security, educational, and other applications.

HDBaseT Extender Set with Wall-Plate Transmitter

The Evolution by Vanco EVWP3000 HDBaseT extender with single-gang wall-plate transmitter supports resolutions up to 4K@60Hz, 4:4:4 chroma over a single Cat5e/6 cable up to 131ft (40m) or 1080p@60Hz up to 230ft (70m). Featuring HDBaseT technology, this extender set supports audio, video, IR, and Power over HDBaseT (PoH) that transmits power over the Cat5e/6 cable. The EVWP3000 is a great wall-plate solution for extending HDMI signals using HDBaseT technology for both residential and commercial installations.

HDTools UHD HDMI 2.0, 4K60 4:4:4, HDCP 2.2, HDR, Bi-directional IR & RS-232, Bi-directional PoE over HDBaseT Transmitter/Receiver Set

The HCE III-L Tx/Rx is a premium HDMI 2.0 HDBaseT™ Extension System for Ultra HD/4K and HDR formats featuring an HDMI loop out on the transmitter for preview monitoring, as well as an additional output on the receiver for local distribution. The HCE III-L Tx/Rx supports 4K@60Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps with HDCP 2.2 compliance.

The HCE III can transmit Ultra HD/4K signals to distances up to 130 feet (40 meters) and 1080p to distances up to 230 ft. (70 meters) over a single category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoC.

Individual units also available: HCE III-L Transmitter and HCE III-L Receiver

4K60 1×4 HDBaseT Distribution System

The HT-140U 4K60 HDBaseT distribution system makes signal distribution simple and effective. Compatibility with virtually every video and audio format means hassle free installation and operation. Our EDID management system makes it easy to select from over 32 EDID tables, alleviating issues of handshaking in all applications.

**To be used with HT-140U-Rx sold separately (Link)**

4K HDMI and USB-C Over HDBaseT 3.0 100 Meter Extension System with Bi-Directional PoC

The HUE-100 HDMI and USB-C HDBaseT 3.0 extension system offers full HDMI 2.0b, HDR/HDR10/HDR10+ (High Dynamic Range) 4K@60Hz 4:4:4 up to 100 meters on CAT6a/7 cable. The HUE-100 can also transport 1080P60 8 bit up to 150 meters over CAT6a/7 cable. Manual or automatic selection of HDMI and USB-C inputs is available on front panel controls and API. User defined EDID and extraction of display EDID are easy operations using the HUE-100simple API.

The HUE-100 provides Dolby Vision, HLG, multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoC – all with zero loss and zero noise. The HUE-100 also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM. Additionally, the low profile “slim box” enclosure design makes the HUE-100 ideal for limited space installation environments, such as behind flat panel displays and video walls.

4K60 100 Meter Wallplate Extender Switching System with RX Local Auto Switching Input

The HWCE IV HDBaseT extender system provides 328 feet (100 meters) of full 4K60 4:4:4 HDR10+ extension. The wallplate transmitter is powered by the receiver (PoC), and allows manual or automatic switching (last or currently connected, with HDMI priority) between the HDMI and USB-C inputs. The Receiver provides a local auto switching HDMI 4K60 input.

USB 3.2 100 Meter Extender Over CAT

PureLink’s USB32-E100 USB-C 3.2 Gen 1 provides up to 100 meters of reliable extension. Adding the USB32-E100 could not be simpler, connect the TX and RX with CAT6a cable or better, apply power to the TX, add your USB devices, and that’s it! The USB32-E100 is a perfect extension solution for USB cameras, touch panels, as well as desktops, laptops, and more. TAA Compliant.

4K HDMI & USB/KM over IP Decoder – TAA

The VIP-T300-D 4K HDMI & USB/KM over IP Decoder provides UltraHD/4K video, audio, RS-232, IR, and USB signal transport over IP networks. The VIP-T300-D can be used as a point-to-point extension system supporting distances up to 300 meters, as well as layered distribution, switching, and matrix switching systems using multiple control options including PureLink’s VPX IP Video Management Software.

4K HDMI & USB/KM over IP Encoder – TAA

The VIP-T300-E 4K HDMI & USB/KM over IP Encoder provides UltraHD/4K video, audio, RS-232, IR, and USB signal transport over IP networks. The VIP-T300-E can be used as a point-to-point extension system supporting distances up to 300 meters, as well as layered distribution, switching, and matrix switching systems using multiple control options including PureLink’s VPX IP Video Management Software.

4K60 HDMI & USB/KM CAT and Fiber – AV over IP Decoder – TAA

The VIP-T400 4K HDMI & USB/KM CAT and Fiber AV over IP Decoder provides UltraHD/4K60 4:4:4 HDR video, audio, RS-232, IR, and USB 1.1, 2.0, and USB camera signal transport over IP networks. The VIP-T400 can be used as a point-to-point extension system supporting distances up to 120 meters over CAT6a, and up to 2 kilometers over SFP Single Mode Fiber, and is also compatible with MultiMode SFP for shorter distances. The VIP-T400 is designed to handle multiple signals types for applications that require reliable distribution, switching, matrixing, and layered matrix switching. The VIP-T400 supports audio insertion and extraction. Multiple control options are available including the VIP-T400’s own rich API, PureLink’s VPX IP Video Management Software, and QSC plugin. Providing complete and reliable AV over IP extension, the VIP-T400 is the ideal solution for your application. The VIP-T400 is TAA compliant, making it perfect for Government and Military applications and critical viewing 24/7/365 installations.

4K60 HDMI & USB/KM CAT and Fiber – AV over IP Encoder – TAA

The VIP-T400 4K HDMI & USB/KM CAT and Fiber AV over IP Encoder provides UltraHD/4K60 4:4:4 HDR video, audio, RS-232, IR, and USB 1.1, 2.0, and USB camera signal transport over IP networks. The VIP-T400 can be used as a point-to-point extension system supporting distances up to 120 meters over CAT6a, and up to 2 kilometers over SFP Single Mode Fiber, and is also compatible with MultiMode SFP for shorter distances. The VIP-T400 is designed to handle multiple signals types for applications that require reliable distribution, switching, matrixing, and layered matrix switching. The VIP-T400 supports audio insertion and extraction. Multiple control options are available including the VIP-T400’s own rich API, PureLink’s VPX IP Video Management Software, and QSC plugin. Providing complete and reliable AV over IP extension, the VIP-T400 is the ideal solution for your application. The VIP-T400 is TAA compliant, making it perfect for Government and Military applications and critical viewing 24/7/365 installations.

4K60 HDMI & USB/KM Double Gang In-wall AV over IP Encoder

The VIP-T400-E-WP is a 4K60 HDMI & USB/KM AV over IP Encoder Wallplate, designed to work together with the VIP-T400-E/D system, delivering high-quality UltraHD/4K60 4:4:4 HDR video, USB, and high-res audio over IP networks. It supports point-to-point extension up to 394ft (120m) via Cat6a and accommodates various signal types for dependable distribution, switching and matrixing needs. The proprietary channel display makes it easy to identify which source you want distributed to which display. Up to 1000 sources and even more displays can be added to the system.

Key features include ultra-low latency, quick or instant switching, video wall processing, 2ch stereo analog audio embedding. Additionally, the VIP-T400-E-WP provides diverse control options including its own API, PureLink’s iCON™ Control/Automation platform, Purelink’s VPX™ IP Video Management Software, as well as modules/plugins for Crestron and Q-Sys . It is TAA compliant, ensuring suitability for government, military, and 24/7/365 installations.