Over CATx Extenders

Vanco 280501 HDMI® Extender over Single Cat5e/6 Cable with IR

The Vanco 280501 HDMI Extender over Single Cat5e/6 with IR, extends high definition video and audio signals, and IR, at a distance of up to 196ft/60m over a single Cat5e/6 cable. No EQ adjustments are necessary as the receiving unit automatically adjusts for gain by just a push of a button. Fully supports 1080p high definition resolution, multiple audio formats, and is HDCP compliant. In addition, IR pass-through allows for source control with IR accessories included. With Power over Cable or PoC functionality, only 1 power supply connected to the transmitter is needed to power up both the transmitter and receiver. For extending HDMI over a single Cat5e/6 at a long distance, with IR, the 280501 is a great cost effective solution for any application!

Tech Support Tips:

• Recommended to be used with a permanent source, or non-rotating source. For any rotating source such as a conference room type setup, it is recommended to use an HDBaseT extender
  
• HDMI UHD Deep Color mode on some LG displays may need to be deactivated to avoid video signal issues
  
• Input Signal Plus on some Samsung displays may need to be deactivated to avoid video signal issues

Vanco 280544 VGA over Cat5e/Cat6 Extender with Audio (500ft)

Vanco’s VGA over Cat5e/Cat6 Extenders with Audio allow VGA and audio signals to be transmitted using a single Cat5e or Cat6 cable up to 500 ft (280544) or 1000 ft (280546). For control and fine tuning, the 280546 offers EQ and GAIN controls on the receiver balun to fully adjust for distance range and transmission signal optimization. The 280546 also features dual output, which allows for one display with audio at origin location and an additional display device with audio in a remote location. The 280544 and 280546 support computer resolutions UXGA (1600x1200), SXGA (1280x1024), XGA (1024x768), SVGA (800x600) and VGA (640x480)

The Vanco 280756 Analog Audio Extender allows for extending analog audio over a single Cat5e/6 cable up to 240ft. Features RCA connections on both units so that
audio signals can travel either way. For a quick and simple solution to extend analog audio at a long distance, the 280756 is a great tool for any application.

EXTENDER AUDIO 3.5MM over CAT5E/6 CABLE. This product extends up to 240ft using a single Cat5e/6

HDBaseT™ 4K@60Hz, 4:4:4 Chroma, HDR Extender

The Vanco HDBT4K50 HDBaseT 4K@60Hz, 4:4:4 Chroma, HDR Extender with Bi-directional IR, and Power over Cable (PoC) extends 4K/60Hz, 4:4:4 with HDR along with audio, at a distance of up to 164ft/50m over a single Cat5e/6 cable. Also able to pass 1080p/60Hz up to 230ft/70m. Power over Cable (PoC) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. In addition, bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR, the HDBT4K50 is a great plug and play solution for connecting the latest components! The HDBT4K50 includes two units: transmitting unit (HDBT4K50-TX) and receiving unit (HDBT4K50-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The HDBT4K50 offers the most convenient solution for 4K extension over a single Cat5e/6 with Power over Cable, and is the perfect solution for any application.

HDMI Extender Over Cat5e/6 Cable with IR and HDMI Loop-Out

The HDEX60 by Vanco extends 1080p high-definition video, audio, IR, and power up to 196ft (60m). Power over Ethernet (PoE) technology transmits power over Cat5e/6 cabling to either the transmitter or receiver unit without the need for a power supply. No EDID or EQ changes are necessary as the units automatically adjusts with dynamic EDID management. HDMI loop-out is built into the transmitter for connecting additional local displays, AVR, or other system components. IR pass-through also allows for source control from the display location.