Over CATx Extenders

Quest offers a HDMI Extender that allows you extend HDMI

The HDMI™ Extender lets you extend HDMI™ audio/video signal by up to 60 meters (196 feet) over single CAT6 cable. The extender kit includes both the local transmitter and remote receiver units, perfect for point‐to‐point digital signage applications that require high quality HDMI™ video. It also works to extend Infrared IR signals from remote controls, ideal for controlling your video source from your video destination. For perfect performance, the extender comes with a reset function on the receiver, which enables user to adjust the signal to best match the cable length.

USB 1.1 Extender over Ethernet up to 150ft

Note:: Ethernet patch cable sold separately.

The maximum distance for a USB cable is typically 15 feet. After that, the USB signal begins to fade and reliability becomes an issue. USB cables with repeaters are one solution, but the USB-EXTENDER can carry your signal far beyond the scope of a booster. They use the twisted pairs of a single Ethernet cable to achieve extraordinary distances. Using this extender set, you can increase your distance to up to 150 feet using Cat5E cables. It is compatible with Windows and iOS platforms, so it can be used with most PC and Mac computers. No software installation is required.

Rated for USB 1.0 and 1.1 standards and specifications, the USB-EXTENDER is best suited for printers, keyboards, and mice but may not be appropriate for external hard drives, cameras, or charging and syncing mobile devices. It is also not recommended for use with wireless devices such as USB WiFi adapters. These extenders are small and require no power source, so they can be easily stashed anywhere. The single Ethernet cable is also easily run through conduit for a simple in-wall solution.

Vanco 280501 HDMI® Extender over Single Cat5e/6 Cable with IR

The Vanco 280501 HDMI Extender over Single Cat5e/6 with IR, extends high definition video and audio signals, and IR, at a distance of up to 196ft/60m over a single Cat5e/6 cable. No EQ adjustments are necessary as the receiving unit automatically adjusts for gain by just a push of a button. Fully supports 1080p high definition resolution, multiple audio formats, and is HDCP compliant. In addition, IR pass-through allows for source control with IR accessories included. With Power over Cable or PoC functionality, only 1 power supply connected to the transmitter is needed to power up both the transmitter and receiver. For extending HDMI over a single Cat5e/6 at a long distance, with IR, the 280501 is a great cost effective solution for any application!

Tech Support Tips:

• Recommended to be used with a permanent source, or non-rotating source. For any rotating source such as a conference room type setup, it is recommended to use an HDBaseT extender
  
• HDMI UHD Deep Color mode on some LG displays may need to be deactivated to avoid video signal issues
  
• Input Signal Plus on some Samsung displays may need to be deactivated to avoid video signal issues

USB 2.0 Cat5e/Cat6 Extender Via Single RJ45 Ethernet

This USB extender allows you to conquer 150Ft USB length limitation, Connect your USB peripherals and important equipment without regard for proximity. The USB Extender uses Cat5, Cat5e, or Cat6 RJ/45 cable to extend the range of your USB devices by up to 150Ft feet. The units compact design allows for easy placement behind equipment or around corners. Its simple: One side of the USB Extender attaches to your USB peripheral, the other to the USB port on your PC. The three aforementioned cable options connect them in the middle. Gone are the days of trying to fit all your peripherals onto one desk. The USB Extender simplest way to spread your equipment out.

The PureLink DCE II Tx/Rx DVI over CATx Extension System enables lossless DVI video transmission up to 220 feet using a single category cable. The active receiver uses the source device's power, so no external power source is required. This kit includes both the transmitter and receiver for a complete solution. Just add cables!

Evolution HDMI over IP Transmitter/Receiver

The Evolution by Vanco EVOIPLITE HDMI over IP Transmitter/Receiver is a complete audio, video, and control product over ethernet system. As a whole, the system has the ability to send multiple sources to multiple displays along with IR and RS232 pass-through, analog and digital audio breakout in TX mode, video up to 1080P@60Hz, with POE up to 100m when connected to a POE enabled switch off of a single Cat6 cable. This one single unit can be set to transmit or receive signals. When connected to a network with internet, the EVO-IP Cloud allows for additional features such as scheduling events or maintenance, remote monitoring of a system including remote diagnostics and troubleshooting, as well as voice control capabilities with Alexa! With an IP-less installation option as well as any new sources/displays being discovered automatically within the system, the EVO-IP HDMI over IP system is the fast, easy, and cost effective solution for both residential and commercial installations.

The BG-USB-LR100 USB 2.0 Extender over Single Cat.X allows USB devices to be extended at distances up to 100 meters (328 feet). This unit consists of two devices - transmitter and receiver.
The transmitter is located at the computer while the receiver connects to peripheral devices such as printers, cameras, storage devices, and more. The receiver features a 2-port USB hub to allow connection for multiple devices. When you need a reliable, long-range solution for USB 2.0 connectivity look no further!

The BG-AUD-TCS is a compact audio extender designed to transmit audio signals up to 290 meters (950 feet) away. It can transmit an analog stereo signal up to 170 meters (555 feet), and TOSLINK or digital coax up to 290 meters. The transmitter has 1 x TOSLINK, 1 x COAX, and 1 x 3.5mm stereo input jacks. The receiver has 1 x TOSLINK, 1 x COAX, and 1 Stereo RCA outputs. The integrated switch lets you to manually select the desired audio input, allowing you to connect multiple sources and switch between them as needed. This is the perfect solution for any situation requiring long distance audio transmission.

Vanco 280544 VGA over Cat5e/Cat6 Extender with Audio (500ft)

Vanco’s VGA over Cat5e/Cat6 Extenders with Audio allow VGA and audio signals to be transmitted using a single Cat5e or Cat6 cable up to 500 ft (280544) or 1000 ft (280546). For control and fine tuning, the 280546 offers EQ and GAIN controls on the receiver balun to fully adjust for distance range and transmission signal optimization. The 280546 also features dual output, which allows for one display with audio at origin location and an additional display device with audio in a remote location. The 280544 and 280546 support computer resolutions UXGA (1600x1200), SXGA (1280x1024), XGA (1024x768), SVGA (800x600) and VGA (640x480)

ADDER Link X-DVIPRO - Adder Technology

Part of the ADDERLink^® X-DVI PRO range, the high performance X-DVI PRO digital video and USB extender enables you to locate your critical computing hardware in a secure and temperature controlled environment. Uncompressed digital video and audio is distributed in real-time and with zero latency, allowing the user to maintain an at-the-PC experience. The USB 2.0 interface ensures compatibility with a wide range of USB devices.

• Delivers uncompressed digital video with audio
• USB 2.0 Low and Full speed connection: to interface with a range of devices
• Exact content seen on the local monitor is distributed: up to 50m over a single CATx cable
• Energy efficient design: external power supplies are not needed

Note: This product is only compatible with other Adder branded products

EXTENDER AUDIO 3.5MM over CAT5E/6 CABLE. This product extends up to 240ft using a single Cat5e/6

HDMI KVM Extender 4K/60Hz HDR 230ft/70m

The Evolution by Vanco EVEXKVM3 HDMI Extender over single Cat6 with Digital Audio Breakout, HDMI Loop-out, KVM, and PoE, extends 4K@60Hz, 4:4:4 Chroma, and HDR10 up to 230ft/70m. USB pass-through allows for controlling a security NVR/DVR, computer, NAS system, touch screen display, or other components that are controlled by USB with this extender. No need to run a separate line or extender just for USB control! Vanco’s patented bi-directional Power over Ethernet (PoE) Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. The transmitter is equipped with an HDMI loop-out for local monitoring or use with other distribution products. The receiver features digital optical output to break multi-channel audio out to amplifiers for a better listening experience. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR10, with options for connecting a keyboard, mouse, and other USB peripherals, the EVEXKVM3 is a great plug and play solution for connecting the latest components!

The EVEXKVM3 includes two units: transmitting unit (EVEXKVM3-TX) and receiving unit (EVEXKVM3-RX). The transmitting unit is used to capture the HDMI input with KVM signals and carries the signals via one cost effective Cat6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing KVM signals. The EVEXKVM3 offers the most convenient solution for HDMI extension over a single Cat6 with Power over Ethernet, and is the perfect solution for any application.

NOTE: – All specifications and ratings for the EVEXKVM3 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieve rated distance, and to maximize resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.

PulseAudio Microphone Mixing Extender

The PulseAudio PA-EXMIX Microphone Mixing Extender over single Cat5e/6 extends analog audio signals up to 300m/984ft . Mixing is done with an easy to use dial on the transmitting unit that is able to mix audio between the XLR and stereo AUX inputs. The PA-EXMIX also utilizes PoC (power over cable) technology so that the transmitter can be powered from the receiver with a single power supply allowing for flexibility. Have more than 2 sources needing to be mixed? No problem as an additional PA-TXMIX (sold separately) can be used and cascaded over a single Cat5e/6 for even larger solutions!

The PA-EXMIX includes two units: transmitting unit (PA-TXMIX) and receiving unit (PA-RXMIX). The transmitting unit is used to capture the audio input(s) and carries the signals over a single Cat5e/6 cable. The receiving unit is responsible for converting the audio signals over the Cat5e/6 cable to a balanced XLR and 3.5mm stereo audio outputs.

PulseAudio ARC Digital Audio Extender

The PulseAudio PAEXARC1 is an ARC Digital Audio Extender that allows digital audio to be routed from a display, back to a remote location or amplifier, over a single Cat5e/6 cable up to 492ft (150m). For displays without ARC capability, or when ARC settings are not working as they should, the built-in “ARC Backup Plan” is featured where audio can still be extended utilizing SPDIF. For applications where ARC signals need to be extended above HDMI® cabling limitations to an amplifier or distributed audio system, the PAEXARC1 is the perfect solution.

The range of the PAXEARC1 will vary depending on the HDMI®/ARC sample rates. For instance, higher sample rates, 192kHz, will be rated at 295ft (90m), while lower sample rates, 96kHz, will be rated at 492ft (150m).

Wall Plate Mixing Microphone and Analog Audio Extender

The PulseAudio PA-WPMIX Microphone Mixing Extender with dual-gang wall-plate transmitter extends and mixes balanced XLR and unbalanced analog audio signals up to 300m/984ft over a single Cat5e/6 cable. Mixing is done with an easy to use dial on the transmitting wall plate unit that is able to mix audio between the XLR and stereo AUX inputs. The PA-WPMIX also utilizes PoC (power over cable) technology so that the transmitter can be powered from the receiver with a single power supply allowing for flexibility. Have more than 2 sources needing to be mixed? No problem as an additional PA-TXMIX (sold separately) can be used and cascaded over a single Cat5e/6 for even larger solutions!

The PA-WPMIX includes two units: transmitting unit (PA-TXMIX-WP) and receiving unit (PA-RXMIX). The transmitting unit is used to capture the audio input(s) and carries the signals over a single Cat5e/6 cable. The receiving unit is responsible for converting the audio signals over the Cat5e/6 cable to a balanced XLR and 3.5mm stereo audio outputs.

USB 2.0 Extender over Cat5e/6 Cable

The Evolution by Vanco EVEXUSB2 is a full function USB 2.0 extender over a single Cat5e/6 cable, information and control can be transmitted up to 330ft/100m over Cat5e and 492ft/150m over Cat6. Supports up to four USB 2.0 devices such as webcams, microphones, touchscreens, printers, cameras, scanners, USB flash drives, keyboards, mice, etc., and supports gigabit switch cascade capabilities. Perfect solution for security monitoring, gaming, industrial control, professional audio-visual, smart medical and more.

Ultra Slim HDMI® over Single Cat5e/Cat6 Cable Extender with PoE

The Evolution by Vanco EVEX2006 HDMI Extender over Single Cat5e/6 with Bi-directional IR, auto EDID/EQ, and PoE extends high definition video and audio signals, IR, and power at a distance of up to 164ft/50m over a single Cat5e/6 cable. Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply. No EDID or EQ adjustments are necessary as the units automatically adjusts for compatibility and gain. This extender set also features a newly redesigned slim and compact chassis for easy and flexible
installations. This product fully supports DTS-HD and Dolby TrueHD audio formats, and is HDCP compliant. In addition, bidirectional IR pass-through allows for source or display control. For extending HDMI over a single Cat5e/6 with IR at a long distance, with Power over Ethernet, the EVEX2006 is a great plug and play solution!

The EVEX2006 includes two units: transmitting unit (EVEX2006-TX) and receiving unit (EVEX2006-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EVEX2006 offers the most convenient solution for HDMI extension over a single Cat5e/6 with Power over Ethernet, and is the perfect solution for any application.

Tech Support Tips:

• Please install as a complete set. Due to necessary changes to the product over time, do not mix with other EVEX2006 units or other products within the same family (EVSP1013, EVSP1017, EVRX2006, EVWP2006, EVWP2006TX/RX) to ensure compatibility and functionality
• Recommended to be used with a permanent source, or non-rotating source. For any rotating source such as a conference room type setup, it is recommended to use an HDBaseT extender
• HDMI UHD Deep Color mode on some LG displays may need to be deactivated to avoid video signal issues
• Input Signal Plus on some Samsung displays may need to be deactivated to avoid video signal issues

 Ultra Slim HDMI Extender 4K/60Hz

The Evolution by Vanco EV4K2006 HDMI Extender over Single Cat5e/6 with Bi-directional IR, auto EDID/EQ, and Bi-directional PoE extends 4K ultra high definition video with HDR and audio signals, IR, and power. Extends 4K@60Hz, 4:4:4 Chroma Subsampling and HDR up to 164ft/50m, and 4K@30Hz, 4:4:4 Chroma Subsampling, and HDR up to 130ft/40m. Bidirectional Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply. No EDID or EQ adjustments are necessary as the units automatically adjusts for compatibility and gain. This extender set also features a newly redesigned slim and compact chassis for easy and flexible installations. This product fully supports DTS-HD and Dolby TrueHD audio formats and is HDCP compliant. In addition,
bi-directional IR pass-through allows for source or display control. For extending HDMI over a single Cat5e/6 with IR at a long distance, with Power over Ethernet, the EV4K2006 is a great plug and play solution!

The EV4K2006 includes two units: transmitting unit (EV4K2006-TX) and receiving unit (EV4K2006-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EV4K2006 offers the most convenient solution for HDMI extension over a single Cat5e/6 with Power over Ethernet and is the perfect solution for any application.

Tech Support Tips:

• Not recommended to be used with other HDMI distribution products such as splitters and matrix units. Evolution HDBaseT extenders are recommended for combining with HDMI distribution products
• Recommended to be used with a permanent source, or non-rotating source. For any rotating source such as a conference room type setup, it is recommended to use an HDBaseT extender
• HDMI UHD Deep Color mode on some LG displays may need to be deactivated to avoid video signal issues
• Input Signal Plus on some Samsung displays may need to be deactivated to avoid video signal issues

USB 3.0 over HDBaseT Extender (PoC, RS-232, GPIO & up to 100M/328Ft over CAT6a Cable)

The BG-USB3-LR100 USB 3.0 Extender is an essential tool for extending USB connections over long distances, capable of transmitting signals up to 100 meters (328 feet) using a single CAT6a cable. Designed for reliability and performance, this extender ensures high-speed data transfer with rates up to 5Gbps, making it ideal for various applications, including industrial settings and large-scale installations.

The transmitter features a USB 3.0 Type B input, FSYNC GPIO input, and RS-232 pass-through, while the receiver offers four USB 3.0 Type A outputs, FSYNC GPIO output, and RS-232 pass-through. This setup supports bi-directional 24V Power over Cable (PoC), simplifying power management and installation.

4K HDMI Extender

Extends a 4K@30Hz HDMI Signal up to 40 m (130 ft.) or a 1080p@60Hz HDMI Signal up to 70 m (230 ft.) over a Single Cat6 Ethernet Cable, Transmitter and Receiver, Black

Easily extend an Ultra-High-Definition (UHD) signal via a single Ethernet cable to achieve long-distance transmissions.

The Manhattan 4K HDMI over Ethernet Extender Kit lets you transmit an audio/video signal in 4K@30Hz (3840 × 2160) up to 40 m (164 ft.) or 1080p@60Hz up to 70 m (230 ft.) via a single RJ45 Cat6 Ethernet cable. The Kit provides reliable video and multichannel audio transmission for your streaming device, gaming console (PS4, PS4 Pro, PS5, Xbox Series X/S, Switch etc.), Blu-ray player, satellite receiver, PC, laptop, MacBook^® or other HDMI device over longer distances than standard HDMI cables alone can achieve. The transmitter and receiver have additional 3.5 mm jacks for Infrared (IR) inputs that let you control the source or display at either end of the setup.

Flexible Solution for Many A/V Applications

Ideal for trade shows, classrooms, home theater, conference rooms, business office and retail applications, the Manhattan 4K@30Hz HDMI over Ethernet Extender Kit is a cost-effective solution that boosts and extends an HDMI signal to where it's needed. Ethernet cabling - shielded or unshielded - has a higher range than HDMI cabling with in-line signal repeaters. When used with our Extender Kit, network cable delivers the clear, sharp and vivid picture that you've come to expect from HDMI cable.

Quality Construction and Easy Installation

HDCP 1.4 compliant with HDMI, the Manhattan 4K HDMI over Ethernet Extender Kit is tested to guarantee performance and reliability. It installs quickly without having to run software or install additional hardware. Built into the modules are mounting brackets that let you tidily install their metal housings on the wall or ceiling.

USB 3.2 Extender Over HDBaseT with USB-C

The EVEXUSB32 supports up to four USB 3.2 devices, such as webcams, keyboards, mice, and storage devices using USB-A and USB-C connections. Power over HDBaseT (PoH) technology allows for a single power supply on either end while two 1.5A ports (USB-A & USB-C) and two 1A ports (USB-A) provide power to the connected devices. With its reliable transmission and versatile connectivity options, the EVEXUSB32 supports corporate, medical, security, educational, and other applications.

HDTools USB-C 30 Meter CAT Transmitter/Receiver Kit

The EZU easily extends Windows, Chrome, and Mac laptops, or other USB-C video signals, up to 164 ft. (50m) at 4K60 and even farther at lower refresh rates and resolutions . The receiver conveniently provides an HDMI output connector, allowing USB-C video signal to convert to and seamlessly connected to a display. Simple and effective, the EZU allows worry free extension of USB-C Alt DP Mode video signals to your display.

HDTools UHD HDMI 2.0, 4K60 4:4:4, HDCP 2.2, HDR, Bi-directional IR & RS-232, Bi-directional PoE over HDBaseT Transmitter/Receiver Set

The HCE III-L Tx/Rx is a premium HDMI 2.0 HDBaseT™ Extension System for Ultra HD/4K and HDR formats featuring an HDMI loop out on the transmitter for preview monitoring, as well as an additional output on the receiver for local distribution. The HCE III-L Tx/Rx supports 4K@60Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps with HDCP 2.2 compliance.

The HCE III can transmit Ultra HD/4K signals to distances up to 130 feet (40 meters) and 1080p to distances up to 230 ft. (70 meters) over a single category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoC.

Individual units also available: HCE III-L Transmitter and HCE III-L Receiver

4K60 1×4 HDBaseT Distribution System

The HT-140U 4K60 HDBaseT distribution system makes signal distribution simple and effective. Compatibility with virtually every video and audio format means hassle free installation and operation. Our EDID management system makes it easy to select from over 32 EDID tables, alleviating issues of handshaking in all applications.

**To be used with HT-140U-Rx sold separately (Link)**

4K60 1×4 HDBaseT Distribution System

The HT-140U-Rx 4K60 HDBaseT distribution system makes signal distribution simple and effective. Compatibility with virtually every video and audio format means hassle free installation and operation. Our EDID management system makes it easy to select from over 32 EDID tables, alleviating issues of handshaking in all applications.

**To be used with HT-140U (Link)**

4K HDBaseT Receiver for HTX III Series

The HTX III-RX is designed for use with the HTX III-4400 and HTX III-8800 Matrix Switcher to extend 4K60 4:4:4 video, audio, two-way IR, and RS-232 signals up to 492 ft. (150m). Using PoC technology, the HTX III-RX can draw power directly from the HTX III-4400/HTX III-8800, eliminating the need for additional power supplies.

Couple the HTX III-RX with the

 iCON Control System for easy implementation of Video/Audio/IR/RS232 matrixing and control of your space.

4K HDMI and USB-C Over HDBaseT 3.0 100 Meter Extension System with Bi-Directional PoC

The HUE-100 HDMI and USB-C HDBaseT 3.0 extension system offers full HDMI 2.0b, HDR/HDR10/HDR10+ (High Dynamic Range) 4K@60Hz 4:4:4 up to 100 meters on CAT6a/7 cable. The HUE-100 can also transport 1080P60 8 bit up to 150 meters over CAT6a/7 cable. Manual or automatic selection of HDMI and USB-C inputs is available on front panel controls and API. User defined EDID and extraction of display EDID are easy operations using the HUE-100simple API.

The HUE-100 provides Dolby Vision, HLG, multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoC – all with zero loss and zero noise. The HUE-100 also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM. Additionally, the low profile “slim box” enclosure design makes the HUE-100 ideal for limited space installation environments, such as behind flat panel displays and video walls.

4K60 100 Meter Wallplate Extender Switching System with RX Local Auto Switching Input

The HWCE IV HDBaseT extender system provides 328 feet (100 meters) of full 4K60 4:4:4 HDR10+ extension. The wallplate transmitter is powered by the receiver (PoC), and allows manual or automatic switching (last or currently connected, with HDMI priority) between the HDMI and USB-C inputs. The Receiver provides a local auto switching HDMI 4K60 input.

70 Meter USB 2.0 Extender over CAT5/6

PureLink’s USB 2.0 Extender of CAT provides up to 70 meters of reliable extension. Adding the USB2-E70 could not be simpler, connect the TX and RX with quality CAT5e cable or better, apply power to the TX, add your USB devices, and that’s it!

USB 3.2 100 Meter Extender Over CAT

PureLink’s USB32-E100 USB-C 3.2 Gen 1 provides up to 100 meters of reliable extension. Adding the USB32-E100 could not be simpler, connect the TX and RX with CAT6a cable or better, apply power to the TX, add your USB devices, and that’s it! The USB32-E100 is a perfect extension solution for USB cameras, touch panels, as well as desktops, laptops, and more. TAA Compliant.

HDMI 4K Extender over Single Cat6 w/ IR Extension - 229ft

When trying to extend a HDMI connection, using longer HDMI cables may not be an option, nor may it be easy to run the cable in the walls of your residential or commercial building when compared to Ethernet cables. The HDMI extender over Cat6 cable provides an efficient and simple method to extend the HDMI connection using Ethernet cables. With support for resolutions up to 4K 60Hz at 229 feet, expanding the HDMI signal couldn't be easier, while supporting Ultra HD resolutions for an optimal viewing experience.

How it Works

The HDMI extender comes with a sender and receiver. The sender will plug into a HDMI source, such as a Blu-ray or DVR player. On the other end of the sender is a Cat6 RJ45 Ethernet port. A Cat6 cable is plugged into the RJ45 Ethernet port and then plugged into the other end on the receiver side. On the receiver side, another HDMI cable would then plug into a display for output. IR cables are also included for using a remote control.

Metal Enclosure

Constructed with a metal enclosure, the HDMI extender provides a solid and sturdy build that can be used in a variety of applications.

4K 60Hz HDR Support

The HDMI extender supports resolutions up to 4K / 60Hz at 229 feet with Cat6/6a, delivering stunning picture quality at a longer distance. For those limited by 1080p over longer distances, this solves the issue.

IR Support

What's the point in extending a HDMI signal if you can't control the source device remotely. The extender includes IR support, allowing IR cables to be plugged in on the sender and receiver side. This provides remote control functionality on the display side.

HDMI Loopout, S/PDIF Audio Output, Lightning, Surge, and ESD protection

The HDMI extender features an HDMI loop out port for connecting and viewing a local HDMI display. The extender also includes a independent S/PDIF audio port for extracting and outputting audio. Easily switch between the two audio output modes on the receiver, ARC or S/PDIF. Audio Return Channel (ARC): Allows user to have one connection between TV to audio receiver or sound bar. Send video to the TV with an HDMI cable and the same HDMI cable sends audio from TV back down the same cable. Lightning, Surge, and ESD protection are all built into the device to keep it safe and lasting long.

Wall Mountable Design

Included with the HDMI extender are mounting brackets and screws. This extender features a wall-mountable design for a clean and flexible installation.

Applications

3.5mm Stereo Audio Extender Over Cat5e/Cat6 250ft

3.5mm Stereo Audio Ove Cat5e / Cat6, Stereo Balun Extender, Stereo Balun Extender Over Ethernet.