Electrical Tools

WarriorWrap 7mil Select Vinyl Electrical Tape, 60ft

APPLICATIONS

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing
• Used for jacketing on high voltage splices

GB's heavy wall heat shrink tubing provides maximum reliability for insulating and protecting wire, cable and terminations. Deigned for applications where high impact, abrasion and corrosion resistance is needed. This type of heat shrink is submersible and great for direct burial installations. The inner adhesive bonds to plastics, rubber, neoprene, steel and polyethylene. Shrink begins to occur at 120 degree Celsius.

This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick-drying fluid cures in 24 hours and will not deterioriate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV. 4 oz bottle Temp range: -30 to 200 degrees F and -34 to 93 degrees C

Quality electrical tape is designed for general purpose electrical applications. Gardner Bender offers a broad selection of professional grade adhesive tape, including different grades of electric tapes, sealant tapes for a complete assortment, and various colors to support your application. Adhesive tape acts as a superior solution for sealing and insulating splices, terminals and electrical connections in indoor and outdoor applications. Black and colored electrical tape is designed for general purpose electrical applications and made from low-lead PVC material, is resistant to abrasion, UV rays, moisture and many acids.

Quality electrical tape designed for general purpose electrical applications. The vinyl tape is a tough, with an extremely durable adhesive ability. Gardner Bender electrical tape can be used in various electrical applications that require an added protection for a terminal connection. GB's electrical tape is made from low-lead PVC material, is resistant to abrasion, UV rays, moisture and many acids. It is a tough 7 mil tape with excellent adhesive ability and is designed for light-duty use.

Wall Box Template & Level for Metal Boxes, 1-Gang and 2-Gang

Designed specifically for cutting out single and double gang metal old work boxes, this wall template level is perfect for ensuring the boxes are level every time.

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120? C (250? F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125? C: CSA C22.2 No3 198.1, 125? C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637; DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55? C (-67? F) to 135? C (275? F). Shrink temperature: 120? C (250? F) to 250? C (480? F). 600 V/Mil Dielectric strength

The Gardner Bender 3/8 in. Heat Shrink Tubing (3-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120? C (250? F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125? C: CSA C22.2 No3 198.1, 125? C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637; DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55? C (-67? F) to 135? C (275? F). Shrink temperature: 120? C (250? F) to 250? C (480? F). 600 V/Mil Dielectric strength.

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120? C (250? F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125? C: CSA C22.2 No3 198.1, 125? C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637; DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55? C (-67? F) to 135? C (275? F). Shrink temperature: 120? C (250? F) to 250? C (480? F). 600 V/Mil Dielectric strength

GB's friction tape is specially designed to offer the best in gripping. A matted finish gives the user a superior, non-slip surface. Friction tape is perfect for use over electrical splices, or for wrapping grips on tools, handles or sporting goods.

WarriorWrap 7mil Select Vinyl Electrical Tape, 60ft - 10 pack

APPLICATIONS

• Used as primary insulation for wire and cable splices up to 600 volts
• Used for wire harnessing
• Used for jacketing on high voltage splices

ST-R301SHRINK40MM – Fiber Protective Sleeve (heat shrink 40 mm) 100pcs per bag

SimplyTEST™ Fiber Protective Splice Sleeves
Ensure the long-term integrity and protection of your fusion splices with the TREND Networks R301-SHRINK-40MM Fiber Protective Splice Sleeves. These pre-sealed sleeves provide robust mechanical and environmental shielding for critical fiber connections.

Non-Contact Dual Range Voltage Detector Pen, 24-1000VAC & 90-1000VAC W/LED Flashlight

Designed to identify the presence of AC voltage in outlets, switches, circuit breakers, fuses, wires, and cables, this voltage tester is the perfect tool for verifying low and high voltage in live circuits.

Electric Lug and Terminal Crimper

Designed to prep electrical cables, this electrical lug and terminal crimper is perfect for cutting and stripping wires, and crimping insulated and non-insulated lugs and terminals.

Pin Removal Tool, Contact Size 16-20

Compatible with nearly all AMP-style pin connectors between contact sizes 16-20, this tool is perfect for extracting AMP CPC pins from the back of connector blocks.

Cabinet Slotted Insulated Screwdriver, 5/16" x 7"

Jonard's insulated screwdrivers are made of heat treated chrome vanadium steel with a black oxide finish for maximum strength and durability. They are insulated to keep you safe from potentially hazardous voltages.

Cabinet Slotted Insulated Screwdriver, 1/4" x 6"

Jonard's insulated screwdrivers are made of heat treated chrome vanadium steel with a black oxide finish for maximum strength and durability. They are insulated to keep you safe from potentially hazardous voltages.

Cabinet Slotted Insulated Screwdriver, 1/8" x 3"

Jonard's insulated screwdrivers are made of heat treated chrome vanadium steel with a black oxide finish for maximum strength and durability. They are insulated to keep you safe from potentially hazardous voltages.

Cabinet Slotted Insulated Screwdriver, 5/32" x 4"

Jonard's insulated screwdrivers are made of heat treated chrome vanadium steel with a black oxide finish for maximum strength and durability. They are insulated to keep you safe from potentially hazardous voltages.

Phillips Insulated Screwdriver, #3 x 6"

Jonard's insulated screwdrivers are made of heat treated chrome vanadium steel with a black oxide finish for maximum strength and durability. They are insulated to keep you safe from potentially hazardous voltages.

Phillips Insulated Screwdriver, #2 x 4"

Jonard's insulated screwdrivers are made of heat treated chrome vanadium steel with a black oxide finish for maximum strength and durability. They are insulated to keep you safe from potentially hazardous voltages.

Phillips Insulated Screwdriver, #1 x 3"

Jonard's insulated screwdrivers are made of heat treated chrome vanadium steel with a black oxide finish for maximum strength and durability. They are insulated to keep you safe from potentially hazardous voltages.

GFCI Outlet Tester

GFCI Tester detects the most common wiring problems in standard and GFCI receptacles

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. This convenient pocket size probe allows checking of voltage potential with attached test leads/probes and patented snap-in probe storage preset to standard wall outlet spacing.

Adhesive lined with a VW-1 flammability rating, heat shrink tubing provides maximum reliability for insulating and protecting wire, cables and terminations. Tough abrasion and cut resistance provides water resistance and prevents wire corrosion. Strong connections reduce wire pull out and keep you powered even when faced with heavy vibration. To put it simply, our products work and play as hard as you do. If you're the kind of person that never gives up, you can rely on GB Xtreme products to keep the equipment you rely on running at full speed no matter what.

Adhesive lined with a VW-1 flammability rating, heat shrink tubing provides maximum reliability for insulating and protecting wire, cables and terminations. Tough abrasion and cut resistance provides water resistance and prevents wire corrosion. Strong connections reduce wire pull out and keep you powered even when faced with heavy vibration. To put it simply, our products work and play as hard as you do. If you're the kind of person that never gives up, you can rely on GB Xtreme products to keep the equipment you rely on running at full speed no matter what.

High quality tape to insulate many conductor shapes. Insulates and seals surfaces. Fuses to itself during application to stay watertight. Silicone Tape provides permanent mold in 24 hours, or in minutes with application of heat.

The Essential Silicone Protect and Repair Tape. Repair Tape, another innovation from Gardner Bender, can save the day during emergency repairs. Easier than heat-shrink, cleaner than plumbers' putty, and more flexible than a vice grip, Repair Tape is a household necessity. Add it to the tool box, the workshop shelf, and the "junk-drawer" for emergency repairs and maintenance projects. Stretch, wrap, and protect or repair everything from leaky hoses, pipe insulation, electrical connections, tool handles, air ducts, and cord/rope ends.

This rubber based spray-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick-drying fluid cures in 24 hours and will not deterioriate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, to achieve connections that last for decades. To apply, shake well then spray liberally over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. Ideal for both indoor and outdoor use and under extreme environments including automotive, marine, farm/ag and RV. 6oz 1/can, Temp range: -30 to 200 degrees F and -34 to 93 degrees C

GB's heavy wall heat shrink tubing provides maximum reliability for insulating and protecting wire, cable and terminations. Deigned for applications where high impact, abrasion and corrosion resistance is needed. This type of heat shrink is submersible and great for direct burial installations. The inner adhesive bonds to plastics, rubber, neoprene, steel and polyethylene. Shrink begins to occur at 120 degree Celsius.

For flame-retardant, corrosion-resistant insulation around electrical wire, use the Gardner Bender 1-3/32 in. Heavy-Wall Heat Shrink Tubing. This tubing is submersible to accommodate direct burial installations and shrinks at 250 degrees Fahrenheit.

GB's heavy wall heat shrink tubing provides maximum reliability for insulating and protecting wire, cable and terminations. Deigned for applications where high impact, abrasion and corrosion resistance is needed. This type of heat shrink is submersible and great for direct burial installations. The inner adhesive bonds to plastics, rubber, neoprene, steel and polyethylene. Shrink begins to occur at 120 degree Celsius.

When wires become entangled they are safety hazards, for both the equipment and the owner. Gardner Bender offers a variety of products for protection and neatness. As the needs of professional electricians change in managing wire and cable, Gardner Bender continues to deliver innovative solutions. Safely insulate splice connections or re-jacket electrical wiring with the Gardner Bender Heavy-Wall Black Heat Shrink. This heat shrink maintains a seal in underground, direct burial and submerged applications. Can be used to insulate and repair wire and cables.

GB's heavy wall heat shrink tubing provides maximum reliability for insulating and protecting wire, cable and terminations. Deigned for applications where high impact, abrasion and corrosion resistance is needed. This type of heat shrink is submersible and great for direct burial installations. The inner adhesive bonds to plastics, rubber, neoprene, steel and polyethylene. Shrink begins to occur at 120 degree Celsius.

The Gardner Bender 8-Piece Heat Shrink Tubing Assortment is ideal for insulating electrical wire, repairing appliance cords and covering tool handles. This tubing comes in 4 in. lengths and offers resistance to moisture, solvent and flame damage.

The Gardner Bender 3/4 in. Heat Shrink Tubing (2-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.

This thin-wall, polyolefin heat shrink tubing is great for cable insulation, marking and bundling with superior mechanical, abrasion and moisture protection.

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120? c (250? F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125? c: CSA C22.2 No3 198.1, 125? c; mil-dtxl-23053/5, class 1 and 2, amps 3636 and 3637; def stan 59-79, issue 3 type 2a. Continuous operating temperature: -55? c (-67? F) to 135? c (275? F). shrink temperature: 120? c (250? F) to 250? c (480? F). 600 V/mil dielectric strength.

The Gardner Bender 1/2 in. Heat Shrink Tubing (3-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120? C (250? F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125? C: CSA C22.2 No3 198.1, 125? C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637; DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55? C (-67? F) to 135? C (275? F). Shrink temperature: 120? C (250? F) to 250? C (480? F). 600 V/Mil Dielectric strength.

When wires become entangled they are safety hazards, for both the equipment and the owner. Gardner Bender offers a variety of products for protection and neatness. As the needs of professional electricians change in managing wire and cable, Gardner Bender continues to deliver innovative solutions. The 1/4 in. red Heat Shrink Tubing (5-Pack) is made from flame-retardant polyolefin for durability and resistance to solvents and fluids. This heat shrink tubing is ideal for cable bundling and marking.

The Gardner Bender 3/16 in. Heat Shrink Tubing (8-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.

GB's 3 In. assortment of heat shrink is a great kit for the homeowner or for the professional making small repair jobs. Made from PVC material, this heat shrink has a 2:1 shrink ratio and comes in assorted sizes and colors.

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120? C (250? F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125? C: CSA C22.2 No3 198.1, 125? C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637; DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55? C (-67? F) to 135? C (275? F). Shrink temperature: 120? C (250? F) to 250? C (480? F). 600 V/Mil Dielectric strength

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120? C (250? F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125? C: CSA C22.2 No3 198.1, 125? C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637; DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55? C (-67? F) to 135? C (275? F). Shrink temperature: 120? C (250? F) to 250? C (480? F). 600 V/Mil Dielectric strength

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120? C (250? F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125? C: CSA C22.2 No3 198.1, 125? C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637; DEF STAN 59-79, Issue 3 Type 2a. Continuous operating temperature: -55? C (-67? F) to 135? C (275? F). Shrink temperature: 120? C (250? F) to 250? C (480? F). 600 V/Mil Dielectric strength