Electrical Tools

1000A Digital Clamp Meter

Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy.

Dual Range High Voltage Tester

The Dual-Range Non-Contact Tester checks for the presence of voltage in overhead conductors or finds faults in cables. The LOW range detects 50V AC to 1.5kV AC. The HIGH range detects 1.5kV AC to 132kV AC. The tester indicates the presence of voltage with both audible and visual signals.

Insertion Tool Kit

This insertion tool kit is perfect for inserting front release contacts made by most manufacturers.

Klein Tools Slim Digital Multimeter TRMS Auto-Ranging

Klein Tools MM450 Multimeter is a TRMS auto-ranging slim multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty-cycle, and test diodes and continuity. It features a high visibility, reverse contrast display with an optical sensor to automatically optimize viewing in dark or bright ambient light. The slim profile of the MM450 makes this meter almost the size of a cell phone and it conveniently fits into most pockets. The MM450 features the same quality leads you have come to expect from the Digital Multimeter line at Klein Tools. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The PSI8031 verifies proper wiring and connection in 3-phase motor applications.

CIRCUIT BREAKER FINDER KIT

The Sperry Instruments DSA600TRMS True RMS Clamp Meter has more features and functions without the extra cost! This clamp meter offers a large range of superior functions like advanced temperature measurements and peak hold. The meter gives True RMS readings and measures current without having to contact live conductors. This unit features a data-hold switch to maintain the reading on the 5999 count backlit screen and auto power-off functionality to extend battery life. The built in low battery indicator will ensure you won't get incorrect readings due to low batteries. Audible beeper offers easy continuity check (Buzzer Sounds at 100 Ohms or less). We consider safety first; this instrument has been designed and tested according to cETLus standards and is CAT 3 600V rated. This compact, lightweight, yet durable unit has a crush rating of 250 lbs. and a 10 foot drop rating – the best in the industry.

Safety is the number one priority on any job site. Sperry Instruments' testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. The IR Thermometers allow for critical temperature measurements to be taken without having to touch an energized circuit. The D:S ratio or (Distance to Spot Ratio), is a rating used to state the distance, in feet, that the test unit should be from the target in order to measure a one foot diameter section. In other words, a 12:1 D:S Ratio means that from twelve feet away, the test unit is measuring a one foot diameter section of the target.

200 Piece Terminal Kit with Controlled Cycle Crimp Tool - This Multi Piece Terminal Assortment has all the connectors, terminals and the Crimp Tool you'll need.

200 Piece Terminal Kit with Controlled Cycle Crimp Tool features include:

• High impact reusable plastic box
• 22-10 Awg Ergonomic Controlled Cycle Crimp Tool
• Multi piece terminal assortment contains ring and spade terminals, butt connectors & male and female disconnects
• Contains the following:
  • 4 pcs 10012 Ring Terminal 22-16 #6
  • 4 pcs 10014 Ring Terminal 22-16 #8
  • 4 pcs 10016 Ring Terminal 22-16 #10
  • 4 pcs 10032 Ring Terminal 16-14 #6
  • 4 pcs 10034 Ring Terminal 16-14 #8
  • 5 pcs 10036 Ring Terminal 16-14 #10
  • 4 pcs 10062 Ring Terminal 12-10#8
  • 6 pcs 10064 Ring Terminal 12-10 #10
  • 4 pcs 10066 Ring Terminal 12-10 1/4”
  • 4 pcs 10068 Ring Terminal 12-10 5/16”
  • 4 pcs 10112 Spade Terminal 22-16 #6
  • 4 pcs 10114 Spade Terminal 22-18 #8
  • 4 pcs 10116 Spade Terminal 22-18 #10
  • 4 pcs 10132 Spade Terminal 16-14 #6
  • 8 pcs 10134 Spade Terminal 16-14 #8
  • 7 pcs 10136 Spade Terminal 16-14 #10
  • 9 pcs 10162 Spade Terminal 12-10 #8
  • 16 pcs 10164 Spade Terminal 12-10 #10
  • 4 pcs 10166 Spade Terminal 12-10 1/4”
  • 11 pcs 10182 Butt Connector 22-18
  • 11 pcs 10184 Butt Connector 16-14
  • 9 pcs 10186 Butt Connector 12-10
  • 4 pcs 10214 Male Disconnect 22-16 .250
  • 4 pcs 10224 Male Disconnect 16-14 .250
  • 4 pcs 10232 Male Disconnect 12-10 .250
  • 5 pcs 10314 Female Disconnect 22-18 .250
  • 4 pcs 10322 Female Disconnect 16-14 .187
  • 11 pcs 10324 Female Disconnect 16-14 .250
  • 13 pcs 10332 Female Disconnect 12-10 .250
  • 4 pcs 10411 Female Insul Disconn 22-18 .250
  • 5 pcs 10412 Female Insul Disconn 16-14 .250
  • 4 pcs 10414 Female Insul Disconn 12-10 .250
  • 4 pcs 10415 Male Insul Disconn 22-18 .250
  • 4 pcs 10416 Male Insul Disconn 16-14 .250
• Terminals and Disconnects are cULus Listed
• Order Qty of 1 = 1 Terminal Kit

Conduit Measuring Tape - Tough Polyester Conduit Measuring Tape is Used to Measure the Length of a Conduit Run.

Conduit Measuring Tape features include:

• Provides Quick and Accurate Measurement of Conduit Runs
• 1/4" Coated Polyester
• Easy to read Markings in Sequential One-foot Increments
• Tensile Strength: 210 lbs
• Waterproof - Will Not Rot or Mildew
• Tensile Strength: 160 Lb
• Length: 3000 Ft
• Order Qty of 1 = 1 Spool

2000A Digital Clamp Meter

The CL900 is an auto-ranging, true root mean square (TRMS) digital clamp meter that measures AC/DC current via the clamp and measures AC/DC voltage, resistance, continuity, frequency, duty-cycle, capacitance, and tests diodes via test-leads. It features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages, and has a dedicated mode for capturing Inrush Current.

Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

Dual-Laser Infrared Thermometer, 20:1

Klein Tools IR10 is a professional dual targeting laser infrared (IR) thermometer. It offers a wide measurement range, a tight 20:1 distance-to-spot ratio, dual targeting lasers, and several calculation modes to facilitate different temperature measurement applications. In addition to measuring temperature using IR emission, it can also measure temperature using a standard K-type probe.

Flexible AC Current Clamp Meter

This easy to use, stand-alone meter features an 18-Inch flexible clamp that allows access into panels and hard to reach areas (bundled wires, awkward conductors, and PLC cabinets). True RMS readings with CATIV 600V or CATIII 1000V safety rating. Features backlit LCD display, auto-power off after 15 minutes, Max/Min, Hold, Auto-Ranging and Low Battery icons.

Klein Tools Digital Multimeter TRMS Auto-Ranging

Klein Tools MM720 Multimeter is an automatically-ranging true root mean squared (TRMS) digital multimeter that measures AC/DC voltage, AC/DC current, and resistance. It can also measure temperature, capacitance, frequency, duty cycle, diodes, and continuity. It features a high visibility, reverses contrast LCD display with an optical sensor to automatically optimize viewability in dark or bright ambient lighting.

Klein Tools 2500-Pound Conduit Measuring Pull Tape

The Klein Tools 2500-Pound tensile strength conduit measuring pull tape is a durable, flat polyester strapping that disperses pull load and minimizes stretching when pulling. The tape is marked with descending 1-Foot increments to measure conduit runs. Tape is pre-lubricated to reduce friction and comes in a bucket with a hole in the lid for tangle-free dispensing. Pull Tape is also available in a variety of tensile strengths and lengths.

Klein Tools’ conduit benders with Patent Pending Angle Setter™ technology allow for quick, accurate repeated bends. The wide foot pedal provides excellent stability and features angled grooves for extra traction. With easily visible bold cast-in benchmark symbols, degree scales and multiplier scales help save time on the job.