ICC ICCMSJHK44 2 Inch J Hook Cable Support 25 Pack
Cable management is an integral part of a successful installation, but it shouldn't be difficult or costly. Many cable management products over complicate the process and require purchasing many individual pieces which work in conjunction to create a single solution. These two inch J Hooks from ICC are an affordable alternative to expensive cable trays and cable ladders.
These hooks are constructed from high quality galvanized steel with a zinc plated finish, offering both durability and resistance to corrosion. You can depend on years of use. ICC backs these J-Hooks with a three year manufacturer warranty against defects.
They are ideal for structured cabling and hold approximately 80 Cat5E cables or 50 Cat6 cables. Built-in cable anchor points allow you to secure cables with zip ties for additional stability. This convenient multipack comes with both hooks and retainer clips, so you have what you need to get started on your wire organization project. It's not complicated, it's ICC.
Premier FWF-14511 Raceway on a Roll - 3/8 Inch x 50ft, White
Cover Your Tracks
The Premier Raceway FWF-14511 Cable Cover on a Roll is your shortcut to a tidy entertainment center. This 50ft long strip is 3/8" wide and it comes in a clean, convenient pizza box-sized dispenser. Installation of this cord cover is simple and only takes a few minutes, and the unique pull box allows you to cut just the right length of Raceway. This wire cover features a flat one-piece design that makes it especially easy to manage. Once you've cut off the length of strip you need, simply fold the base to create a channel for your cords. Ridges allow the duct shape to snap easily into place. You can either fold up the Raceway before it is mounted or after. The solvent-based adhesive foam tape on the back makes for a simple peel-and-stick mounting process. This cable cover is made of strong, durable flame-retardant PVC with a UV stabilizer to keep the color pure. Raceway is only available in white, but it can be easily painted to the color of your choice.
Garvin Safety Plate for Wood Stud (3-6In)
When low voltage cables are installed through wood studs during construction, there's always the potential someone can accidentally cut, nail or drill through them. Now, make sure your wiring doesn't get damaged with a steel safety plate from Garvin Industries. These plates are designed to be hammered into upright wood studs to ensure no one can penetrate through to the cables. They have built-in prongs to attach to the stud, so you don't even need additional nails or screws. They're quick and easy to install and keep you from having to replace and re-run wiring.
- (10 or 100 ) Steel Safety Plate in your choice of 3 or 6 inch length
From $6.45 - $31.20
WireHider FSTVK-01 TV Cord Cover Kit for Wall Mounted TV - 48in, White
Superior TV Cord Covers for a Superior Experience
Any home theater aficionado can tell you that they don't spent thousands of dollars on the latest and greatest that consumer electronics have to offer just for the sake of it. Televisions (or projectors) with stunning 1080p HD or 4K resolutions. Surround sound systems with five, seven or even eleven speakers. Multiple subwoofers. These things are all terrific, yes. But they're ultimately all working together to help achieve the same straightforward goal at all times: total immersion.
Simply put, the goal is to forget that you're sitting in your home and watching a movie - so that you can forget that you're watching a movie at all. You want to feel like you're a part of the action, like you're standing right there alongside your favorite characters while they meet whatever challenge or solve whatever problem is currently gripping their lives. The best way to instantly shatter that illusion - even after you've spent a huge amount of money on your equipment - is to have your eye suddenly drawn to the countless cables wrapping down the walls in your home.
Which is precisely where the WireHider FSTVK-001 TV Cord Cover Kit for Wall Mounted TVs comes in handy.
These wire covers for wall mounted TV models aren't just a way to make sure that you're never distracted by the cords in your home theater again - they're also by far the easiest way to guarantee the true level of immersion you need when you need it the most. Installation can literally be accomplished from start to finish in just a couple of minutes - all you have to do is attach the base to the wall, run the cables through the base and attach the top compartment. It's that simple.
Not only that, but this particular wire cover features a clear base with not one but two channels - allowing you to keep your low voltage and power cables totally separate so that you also don't have to worry about issues like electrical interference any longer. On the rear side of the base channels, there's a strip of easy-to-use adhesive backing. Just peel off the paper, stick the WireHider in the desired location and you're ready to go. It truly doesn't get much more straightforward than that.
The base channels themselves also have a "top to bottom" slit, making sure that you never have to worry about forcing cables down a long tube. Just push them in through the simple opening and the design of the product itself will take care of the rest.
This cable cover comes in a neutral shade of white that is already perfect for most of the environments you'll be using it in. However, it can also be painted easily to match absolutely any decor without worrying about harming either the product or the wires themselves.
You'll never find yourself in a situation where you're watching your favorite film or TV show and suddenly get distracted by all those messy wires. In truth, you'll probably forget that the wires are even there in the first place.
If you're looking for yet another way to take your home cinema experience to the next level and guarantee a true level of total immersion at all times, congratulations: you've just found it.
8 Inch Cable Tie - 1000 Pack - Black
Free-range cables can be a pest. Turn your back and suddenly it seems like there were more than you had to begin with. Leave them alone long enough and they’re spilling out everywhere. There’s no avoiding them, not at home or at work. You need wires for your entertainment center, your network, and chances are there are wires all over the inside of your computer. Especially in a professional setting, no one wants to see a careless cord cluster. Messy cables aren’t just aesthetically unappealing- they can also cause injury or damage. We’ve all tripped over a cord on the floor that shouldn’t have been there, and pets are especially prone to snacking on loose wires. Even if no one interferes, tangled cables can impede proper air circulation which is especially harmful to the delicate circuits in electronic equipment.
Cable management is important, and although it can seem tedious, it doesn’t have to be. There are many ways to bundle up your renegade cords, but cable ties- also called zip-ties- are the most common method. They’re easy, economical, and designed to last and they can be used in conjunction with an endless number of other cable management systems. The size cable tie you need is largely dependent on how many wires you want to wrangle.
FireFold’s CABLETIE is a great choice for average cable bunches. They also work well in tighter spaces like desktop PCs. These nylon cable ties are flexible and secure. Their classic groove and ratchet design locks the tie into place, preventing loosening even over time. With a tensile strength of 40 lbs, these little cable ties are best suited to medium-duty applications. They’re UL rated as self-extinguishing, so they’re perfect for areas where the temperature is a concern. This 1000-pack will last the average user for years, but there are enough to complete most major projects and our standard low price can’t be ignored. If you need to color-code or color-match your installation, these cable ties also come in clear.
Nitrotel Velcro Hook And Loop Cable Tie 30Ft Roll (Black) 3/4"
Nitrotel Velcro Hook And Loop Cable Tie 30Ft Roll (Black) 3/4"
Laminating Hook and Loop technology is patented worldwide. In cheap similar products, Hook and Loop are heat bonded or uniting by using adhesive. Therefore the connecting part seems to come off easily. Nitrotel NitroWrap never comes off from the connecting part.
Gardner Bender GWM-AST U-Phase Wire Marker - assorted colors, (4/Pck)
Gardner Bender’s new U-Phase Wire Marker takes simplicity and efficiency to a whole new level. Traditionally phasing or color coding wires involved wrapping the wires in colored tape, but now with the U-Phase you are able to simply slide the patented designed marker tip across the wire. The U-Phase is perfect for phasing of electrical panels, color coding, identifying and wiring circuits, marking computer cables and countless other applications making it an essential tool for any electrician.
Gardner Bender Cable Boss Staple Gun, Heavy Duty, Secures NM, Coax, VDV and Low-Volt Cable, Red (1-Pack), MSG-501
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Cable Boss staple gun secures 120-Volt and low voltage cable: Romex, coaxial and CAT5 from the same tool. Features include comfort grip areas for 2 handed operation, easy trigger force and ergonomic handle. Rugged construction capable of surviving a 10 ft. drop. Other features include a reversible cable guide for easy cable stapling change over, a staple refill window to view remaining staples and a rear cable guide for added cable control reduces cable twisting. Secures round and flat cable, 3 sizes covering NM, coax, voice/data and low voltage.
Gardner Bender Low-Volt Wire Staple Gun, Heavy Duty, Stainless Steel, (1-Pack), MSG-301
The Gardner Bender Low-Voltage Staple Gun offers heavy-duty stainless steel construction and secures wires up to 1/4" in diameter. Gun features a safety handle to ensure staples don't release unintentionally. This stapler gun is designed for use with alarm, speaker, thermostat, A/V and computer network wires. Two sizes of staples available; 5/32" (4mm) Model #MMS-3101 and 1/4" (6mm) #MMS-3102.
Gardner Bender SnapSHOT Multi-Cable Staple, Red, NM (flat and round), Coaxial and Data/CAT5
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction, or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast and easy installation when securing most types of cable. The MultiCable Staples organize and secure multiple cable runs on a stud.
From $8.42 - $40.90
Morris 19402 1 Hole EMT Pipe Straps - Steel 1" 100 Pack
1 Hole EMT Pipe Straps 1" - Steel - Our 1 Hole EMT Pipe Straps Secure EMT Conduit.
1 Hole EMT Pipe Straps - Steel 1" features include:
- Secures EMT Conduit
- Reinforced Rib for Extra Strength
- Reinforced Hole
- Snap-On Installation
- Zinc Plated Steel
- cULus Listed
- Order Qty of 100 = 100 Pieces