Simply45

Simply45 Snagless Boot/Strain Relief Cat6 Plugs

SIMPLY45-BOOT-CAT6

SIMPLY45 SNAGLESS BOOT/STRAIN RELIEF FOR SIMPLY45-CAT6 PLUGS- CLEAR COLOR- 100 PIECES PER BAG

Snagless Boot/Strain Relief for SIMPLY45-CAT6 plugs.

These boots lock into the connector allowing both the connector and boot to be crimped in one easy step.

SCP Simply45 Snagless Boot/Strain Relief Cat5E Plugs

S45-B001

SIMPLY45 SNAGLESS BOOT/STRAIN RELIEF FOR SIMPLY45-CAT5E PLUGS- CLEAR COLOR- 100 PIECES PER BAG

Snagless Boot/Strain Relief for SIMPLY45-CAT5E plugs.

These boots lock into the connector allowing both the connector and boot to be crimped in one easy step.

PROSeries 7.3mm Strain Relief with Locking Pin for all Simpy45® UTP Cat6/Cat6A RJ45, Red Tint – 100pcs/bag

Unloaded Port Unshielded Keystone Patch Panel w/ Bracket

Simply45® Unloaded Keystone Modular Patch Panels allow you to easily customize your network panel in the field. This allows you to maximize the use of panel space with multiple configuration options for copper, fiber, and multimedia keystone modules.

Mounts to any 19-inch rack, cabinet, or wall bracket. Includes rear cable management bar; port labels; and mounting hardware. 10GBaseT and backward compliant.

Cable management bracket, cable ties, and rack mount screws included.

ProSeries Integrated Strain Relief for all Simpy45® External Ground Shielded RJ45 – Clear – 100pcs/Bag

Simply45® strain relief boots give a finished and professional look to the cable assembly, improving cable management and reducing the chances of accidental disconnections. Strain reliefs prevent excessive bending or twisting of the cable near the connector, reducing the risk of damage to the internal wires and ensuring a longer lifespan for the cable. Simply45® strain reliefs are the same width as the RJ45 connector body and becomes integrated into the RJ45 plug during the crimping process. The extended tab provides a snag proof protection for the locking tab on the plug. Adding strain reliefs is a cost-effective way to ensure the longevity and reliability of your network connections.

The Simply45® S45-B004P is an 8.5mm (0.33”) snagless narrow-width strain relief for use with larger diameter shielded LAN cables. The S45-B004P is recommended for all Simply45® PROSeries branded shielded with external ground RJ45 modular plugs. These 8.5mm strain reliefs protect the RJ45 modular plug and extend the useful life of the termination. Simply45® recommends that strain reliefs or boots should be used with all RJ45 terminations.

5 1/2" PROSeries Electrician Scissor

The Simply45® PROSeries Electrician Scissor with Stainless Steel Serrated Blades for non-slip cutting action is designed to cut various types of electrical wires, cables, and materials with ease. The Durable high carbon stainless steel blades features a cable cutting notch ito reduce force for larger cables. The ergonomic handles designed for both left and right handed use. Built in scraper on blades to assist with straighting wire conductors and notched to strip 18-24 AWG wire with ease.

Heavy Duty Shears – Finely Serrated High Carbon Stainless Steel Blades Cuts Wire, Insulation Materials, Cable, and More.

Multi-Function: Cuts, Strips, Files, and Trims.

PROSeries Pass Through Blue Tint - Cat5e UTP with Cap45™ - 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

Simply45® is the industry-leading brand for RJ45 modular plug innovation and performance solutions. *Our S45-1501P is the same as our S45-1500P except is packaged in a convenient 50-piece plastic clamshell.

The Simply45® ProSeries introduces the exclusive Cap45® (PATENT 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45® prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or in device sockets that may not be 100% compliant. With Cap45®, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45® is a MUST-HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

S45-TB100R – Heavy Duty Roll Up Tool Bag

Heavy duty roll up tool bag, 5 zippered pouches, black and red – 1Ea/Bag

Impact Punchdown Tool with 110 Punch & Cut Blade

Simply45® Punchdown Tool offers a Hi/Low impact setting designed for large or smaller wire conductor sizes. The rugged design with a rubber base and ergonomic grip handle will greatly reduce hand fatigue. The Bayonet style (twist and lock) socket allows for quick blade replacement to meet all of your punchdown needs. The punchdown tool has a blade storage compartment and hook/spudger tools built into the handle. S45-P300 is professional tool that will provide precise & reliable terminations every time.

Keystone Jack Closure / Seating Pliers – For All Keystone Jacks

The Simply45® keystone jack setting plier provides a parallel motion that is designed to properly seat/close punch-down style and toolless keystone jacks. Unlike adjustable pliers, the S45-C370 provides the correct open/close ratio specifically designed to prevent damage when closing/seating a toolless keystone jack. The ultra-stable platform provides high-quality terminations with professional results.

Dual Cavity External Ground Crimp Tool – For Small and Large Cables

The S45-C360 External ground crimp tool provides two 360° cavities to crimp most shielded connectors with an external ground tab. The Parallel crimper allows the installer to properly complete the grounding process without damaging the shielded cables The S45-C360 will provide reliable terminations with professional results.

Simply45 Connector Compatibility:

This tool is compatible with all Simply45 RJ45 shielded connectors with the external ground. Such as: Part #: S45-1150, S45-1155, S45-1650P, S45-1750P, S45-1755P

Also works with other brands of RJ45 shielded connectors with external ground.

Simply45 Strain Reliefs for all S45 Brand STP External Ground - 100pcs/Bag

Simply45® strain relief boots give a finished and professional look to the cable assembly, improving cable management and reducing the chances of accidental disconnections. Strain reliefs prevent excessive bending or twisting of the cable near the connector, reducing the risk of damage to the internal wires and ensuring a longer lifespan for the cable. Simply45® strain reliefs are the same width as the RJ45 connector body and becomes integrated into the RJ45 plug during the crimping process. The extended tab provides a snag proof protection for the locking tab on the plug. Adding strain reliefs is a cost-effective way to ensure the longevity and reliability of your network connections.

The Simply45® S45-B003 is an 8.5mm (0.33”) snagless strain relief for use with larger diameter shielded LAN cables. The S45-B003 is recommended for all Simply45® brand shielded with external ground RJ45 modular plugs. These 8.5mm strain reliefs protect the RJ45 modular plug and extend the useful life of the termination. Simply45® recommends that strain reliefs or boots should be used with all RJ45 terminations.

Simply45® S45-B003 – 8.5mm (0.33”) Snagless Strain Reliefs Features:

For Large Diameter LAN Cables. The Simply45® S45-B003 is designed to work with most large diameter LAN cables. It can work with cable diameters up to 8.5mm (0.33”). We recommend this strain relief/boot for all Shielded with External Ground RJ45 modular plugs. You can also use these strain reliefs with other unshielded large-diameter LAN cables such as Cat6 Shielded and Cat6 Shielded Direct Burial.

Prolongs Life of the Termination. The S45-B003 takes the strain off the terminated plug. When you do not use a strain relief, any contact with the plug or cable puts strain directly on the terminated plug. Over time this could cause one or more of the RJ45 pins to become loose. If a pin becomes loose it will create electrical resistance.  Resistance creates heat. This could then cause performance problems or damage to the device socket.

Fits Over the Terminated RJ45 Modular Plug. The S45-B003 is designed to fit over Simply45® shielded with external ground RJ45 modular plugs.

Maintains Correct Bend Radius of the Termination. The Simply45® S45-B003 Strain Reliefs protect the terminated RJ45 from damage during the life of the link or channel. Maintaining industry standards bend radius is important for maximizing the link/channel performance.

Professional Finish. In addition to protecting the termination and extending the operating life of the link/channel, the S45-B003 strain reliefs also provide a professional finish to your terminated RJ45.

Trimmable. The S45-B003 strain reliefs are trimmable so that you can adjust the bend radius if necessary, to work in very tight installations.

Clear Color. The S45-B003 strain reliefs come in a clear color so that it easily works with all cable jacket colors.

Snagless Design. The S45-B003 strain reliefs are a snagless design. This prevents broken latch tabs on the RJ45 modular plugs.

Wide Mouth Resealable Bag for Easy Hand Access. No need to spill RJ45 mod plugs out of the bag just to reach them. The S45-B003 strain reliefs bag packaging stands up and can remain open so that you can easily reach in and remove the strain reliefs.

PROSeries Strain Relief with RED Locking Pin for all Simpy45® UTP Cat6/Cat6A RJ45 - 100pcs/bag

Simply45® strain relief boots with red locking pin will greatly reduce truck roll backs from tampering with network connections and accidental disconnections. Strain reliefs prevent excessive bending or twisting of the cable near the connector, reducing the risk of damage to the internal wires and ensuring a longer lifespan for the cable. Simply45® strain reliefs are the same width as the RJ45 connector body and becomes integrated into the RJ45 plug during the crimping process. The extended tab provides a snag proof protection for the locking tab on the plug. Adding strain reliefs is a cost-effective way to ensure the longevity and reliability of your network connections.

The Simply45® S45-B002P – Integrated Snagless Strain Reliefs lock into the RJ45 modular plug so that both the plug and strain relief can be permanently attached to the Simply45® RJ45 modular plug during the crimping cycle.

The Simply45® S45-B002P strain reliefs extend the useful life of the RJ45 modular plug termination and should be used with all terminations. It is also Fast and Easy to Use.

NOTE: The S45-B002P is designed to work with the following Simply45® part numbers: S45-1550, S45-1600/1601; S45-1700/1700P; S45-1100. For Cat5e Unshielded RJ45 modular plugs S45-1500/1501; S45-1000, please use our S45-B001 strain reliefs.

Simply45® S45-B002P Integrated Snagless Strain Reliefs for Cat6/6a and Cat5e Shielded with Internal Ground Features:

Prolongs Life of the Termination. The S45-B002 takes the strain off the terminated plug. When you do not use a strain relief, any contact with the plug or cable puts strain directly on the terminated plug. Over time this could cause one or more of the RJ45 pins to become loose. If a pin becomes loose it will create electrical resistance. Resistance creates heat. This could then cause performance problems or damage to the device socket.

Commercial Rated UL94 V0. The Simply45® S45-B002P RJ45 modular plug strain reliefs are UL94 V0 (IEC 60695-11-10) rated for all commercial installations. These strain reliefs are recommended for CMP Plenum, CMR, CM; and LSZH up to B2ca rated LAN cables.

Narrow Design for Easy Access. The S45-B002P strain reliefs are the same width as the RJ45 modular plug. Most common strain reliefs slide over the RJ45. This makes the terminated connector much wider and difficult to use in multi-port patch panels and devices. Therefore, many installers decide to forgo using strain reliefs. The Simply45® S45-B002P strain reliefs lock into the plug during the termination and maintain a very narrow profile. This allows easy access to the plug in these tight installations.

Maintains Correct Bend Radius of the Termination. The Simply45® S45-B002P Integrated Strain Reliefs protect the terminated RJ45 from damage during the life of the link or channel. Maintaining industry standards bend radius is important for maximizing the link/channel performance.

Professional Finish. In addition to protecting the termination and extending the operating life of the link/channel, the S45-B002P strain reliefs also provide a professional finish to your terminated RJ45.

Trimmable. The S45-B002P strain reliefs are trimmable so that you can adjust the bend radius if necessary to work in very tight installations.

Clear Color. The S45-B002P strain reliefs come in a clear color so that it easily works with all of the Simply45® RJ45 modular plugs indicated above.

Snagless Design. The S45-B002P strain reliefs are a snagless design. This prevents broken latch tabs on the RJ45 modular plugs.

Wide Mouth Resealable Bag for Easy Hand Access. No need to spill RJ45 mod plugs out of the bag just to reach them. The S45-B002P strain reliefs bag packaging stands up and can remain open so that you can easily reach in and remove the strain reliefs.

PoE/PoH Rated. The S45-B002P strain reliefs are ideal for PoE/PoH applications. They are Commercial Rated UL94 V0 to match their RJ45 modular plugs.

24 Port PROSeries Unloaded UTP Keystone Patch Panel, Removable Face Plate, 1RU, Cable Management Bracket

24 Port PROSeries Unloaded UTP Keystone Patch Panel, Removable Face Plate 1RU for Unshielded cable, Includes Cable Management Bracket, 24 Cable Ties, and 4 Rack screws. UL certified and exceed TIA/EIA 568.2-D standards. 1 each boxed

Premium Unloaded Modular Keystone Patch Panels

Simply45® Premium Unloaded Patch Panels allow you to easily customize your network panel in the field. This allows you to maximize the use of panel space with multiple configuration options for copper, fiber, and multimedia keystone modules. Simply45® Premium Unloaded Patch Panels are available in standard 1RU size. Mounts to any 19-inch rack, cabinet, or wall bracket. Our unshielded panels all come with rear cable management bars and port labels. Accepts internationally standardized keystone snap-in modules.

Detachable Front Panels for Quick Installation & Easy Access.

There is no need to remove the entire panel. Our front-loadable design makes your life easier.

24 Port Unloaded STP Keystone Patch Panel, 1RU, Cable Management Bracket, Cable Ties & Rack Screws.

Simply45® Unloaded Keystone Modular Patch Panels allow you to easily customize your network panel in the field. This will enable you to maximize the use of panel space with multiple configuration options for copper, fiber, and multimedia keystone modules. Mounts to any 19-inch rack, cabinet, or wall bracket. Includes rear cable management bar; port labels; and mounting hardware. 10GBaseT and backward compliant.

Simply45® Unloaded Keystone Modular Patch Panels allow you to easily customize your network panel in the field. This allows you to maximize the use of panel space with multiple configuration options for copper, fiber, and multimedia keystone modules.

Mounts to any 19-inch rack, cabinet, or wall bracket. Includes rear cable management bar; port labels; and mounting hardware. 10GBaseT and backward compliant.

PROSeries Pass Through Red Tint, Hi/Lo Stagger - Cat6/6a UTP with Cap45™ - 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

Simply45® ProSeries Unshielded Pass Through RJ45 Modular Plugs with Cap45® for 23AWG Solid (Cat6/6a UTP), Hi/Lo Stagger, Wire Conductors 1.05mm-1.2mm/0.041″-0,047″, Max Cable OD 7.4mm/0.0291″, UL94 V0 Commercial Rated, Red Tint- 50pc/Clamshell

Simply45® the industry-leading brand for RJ45 modular plug innovation and performance solutions introduces our ProSeries Pass-Through RJ45 Modular Plug, S45-1700P for unshielded LAN cables. This exclusive patented pass-through RJ45 modular plug is a historic breakthrough in “pass-through” RJ45 reliability and performance.

The Simply45® ProSeries introduces the exclusive Cap45® (PATENT 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45® prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or device sockets that may not be 100% compliant. With Cap45®, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45® is a MUST-HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

Pass Through Cat6 UTP, Green Tint - 20pcs/Bag

Simply45 Unshielded Pass Through RJ45 Modular Plugs for 23AWG Solid (Cat6 UTP), 26-24AWG Stranded (Cat5e/6 UTP), Wire Conductors 0.95mm-1.05mm/0.037″-0.041″, Max Cable OD 7.0mm/0.276″, UL94 V0 Commercial Rated, Green Tint

PROSeries Pass Through Green Tint - Cat6 UTP with Cap45™ - 50pc Clamshell

Simply45® ProSeries hybrid connectors feature our patented Cap45. The ProSeries connector provides the convenience of a pass-through style with the security of a standard modular plug. Simply45® only uses the highest quality materials to ensure reliable results and will greatly reduce truck rollbacks. Our connectors are commercially rated and feature a 3-prong style contact designed for all PoE applications, making Simply45® ProSeries the most reliable terminations on the market today.

The Simply45® ProSeries introduces the exclusive Cap45® (PATENT 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination, covering the exposed wire ends. Cap45® prevents electrical shorting in the RJ45 socket due to improperly trimmed wires or in device sockets that may not be 100% compliant. With Cap45®, any electrical risks associated with exposed wire ends are now eliminated completely.

Cap45® is a MUST-HAVE for all pass-through RJ45 modular plugs used in commercial and certified system terminations.

Pass Through Cat5e UTP, Blue Tint - 20pcs/Bag

Simply45 Unshielded Pass Through RJ45 Modular Plugs for (Cat5e UTP) Solid 24AWG, (Cat5e/6) Stranded 28-26AWG, Wire Conductors 0.95 – 1.05mm/ 0.037″ – 0.041″, Max Cable OD 6.5mm/0.255″, UL94 V0 Commercial Rated, Blue Tint

Standard Cat5e RJ45 Modular Plugs, Blue Tint - 20pcs/Bag

Simply45 Unshielded Standard WE/SS (8P8C) RJ45 Modular Plugs for 24AWG (Cat5e UTP) Solid, 28-24AWG (Cat5e/6 UTP) Stranded, Wire Conductors 0.95 -1.05mm/0.037″-0.041″, Max Cable OD 6.4mm/0.252″, UL94 V0 Commercial Rated, Blue Tint