Your Cart

Free Shipping on Orders > $74.99 - *Some Exclusions May Apply

expand/collapse
(704) 979-7100 (0)
  • Intellinet Gigabit High-Power PoE+ Injector, 560566
  • Intellinet Gigabit High-Power PoE+ Injector, 560566
  • Intellinet Gigabit High-Power PoE+ Injector, 560566
  • Intellinet Gigabit High-Power PoE+ Injector, 560566
  • Intellinet Gigabit High-Power PoE+ Injector, 560566

Intellinet Gigabit High-Power PoE+ Injector, 560566

SKU#: 560566

UPC#: 766623560566

60 Day Money Back Guarantee

100% Secure Shopping

3-year-warranty53

3 Year Warranty

SKU#: 560566

UPC#:766623560566
$43.99

SKU#: 560566

UPC#:766623560566

Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.

Califonia Warning 65

California Prop 65 Warning

×
For CA Residents Only.
California Proposition 65 Warning

Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.

• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.

For further information, please visit www.P65Warnings.ca.gov

  • Description+
  • Intellinet Gigabit High-Power PoE+ Injector

    1 x 30 W, IEEE 802.3at/af Power over Ethernet (PoE+/PoE)

    Reduce costs by using existing network cable to provide both power and data

    The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The PoE Injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts. That's enough for even power-hungry PoE devices.

    Reduce Wiring Costs

    No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

    Protect Your Equipment

    Now that you are running DC power to your networked equipment through the Cat5e/6 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads and high voltages.

  • Features+
    • Save time and money by delivering data and power via existing network cables
    • Power output of up to 30 watts
    • Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP [Voice over Internet Protocol] telephones, IP surveillance cameras)
    • Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
    • Fanless design ideal for silent operation
    • Fully NDAA-compliant
    • Three-Year Warranty
  • Specs+
  • - SPEC SHEET

    Standards
    - IEEE 802.3af (Power over Ethernet)
    - IEEE 802.3at (High-Power PoE+ Power over Ethernet)
    - IEEE 802.3 (10Base-T Ethernet)
    - IEEE 802.3ab (Gigabit Ethernet)
    - IEEE 802.3u (100Base-TX Fast Ethernet)

    General
    - Media support:
    - 100Base-TX Cat5 UTP/STP RJ45, 8 pin
    - 1000Base-T Cat5e UTP/STP RJ45, 8 pin
    - Ports:
    - 1 RJ45 1000 Mbps input port
    - 1 RJ45 1000 Mbps data and power output port
    - 1 power input connector for external power cable
    - Protection functions:
    - Short circuit protection for short GND
    - Overload protection for currents over 1.8 A
    - High-voltage protection for output voltage exceeding 58 V
    - Compatibility - general: all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices
    - Certifications: FCC Class A Subpart B, CE, RoHS, UKCA, NDAA

    RJ45 Output Connector Pinout (Data + Power)
    - Pin 1: Rx+ (data receive)
    - Pin 2: Rx- (data receive)
    - Pin 3: Tx+ (data transmit)
    - Pin 4: -Vdc_return (+) (feeding power [+])
    - Pin 5: -Vdc_return (+) (feeding power [+])
    - Pin 6: Tx- (data transmit)
    - Pin 7: -Vdc (feeding power [-])
    - Pin 8: -Vdc (feeding power [-])

    LED
    - PoE, Power

    Power
    - Input: 100 – 240 V AC, 50 – 60 Hz
    - Power consumption: 42 watts (maximum)

    Environmental
    - Metal housing
    - Dimensions: 154 (L) x 72 (W) x 35 (H) mm (6.0 x 2.81 x 1.37 in.)
    - Weight: 0.79 kg (1.73 lbs.)
    - Operating temperature: 5 – 45°C (41 – 113°F)
    - Operating humidity: 10 – 90% RH, non-condensing
    - Storage temperature: -20 – 55°C (-4 – 131°F)

  • Package Contents+
    • Gigabit High-Power PoE+ Injector
    • Power cable
    • Installation material (2 screws and drywall anchors)
    • Instructions
  • Reviews+
  • Intellinet Gigabit High-Power PoE+ Injector

    1 x 30 W, IEEE 802.3at/af Power over Ethernet (PoE+/PoE)

    Reduce costs by using existing network cable to provide both power and data

    The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The PoE Injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts. That's enough for even power-hungry PoE devices.

    Reduce Wiring Costs

    No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

    Protect Your Equipment

    Now that you are running DC power to your networked equipment through the Cat5e/6 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads and high voltages.

    • Save time and money by delivering data and power via existing network cables
    • Power output of up to 30 watts
    • Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP [Voice over Internet Protocol] telephones, IP surveillance cameras)
    • Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
    • Fanless design ideal for silent operation
    • Fully NDAA-compliant
    • Three-Year Warranty

    - SPEC SHEET

    Standards
    - IEEE 802.3af (Power over Ethernet)
    - IEEE 802.3at (High-Power PoE+ Power over Ethernet)
    - IEEE 802.3 (10Base-T Ethernet)
    - IEEE 802.3ab (Gigabit Ethernet)
    - IEEE 802.3u (100Base-TX Fast Ethernet)

    General
    - Media support:
    - 100Base-TX Cat5 UTP/STP RJ45, 8 pin
    - 1000Base-T Cat5e UTP/STP RJ45, 8 pin
    - Ports:
    - 1 RJ45 1000 Mbps input port
    - 1 RJ45 1000 Mbps data and power output port
    - 1 power input connector for external power cable
    - Protection functions:
    - Short circuit protection for short GND
    - Overload protection for currents over 1.8 A
    - High-voltage protection for output voltage exceeding 58 V
    - Compatibility - general: all IEEE 802.3at- and IEEE 802.3af-compliant PoE devices
    - Certifications: FCC Class A Subpart B, CE, RoHS, UKCA, NDAA

    RJ45 Output Connector Pinout (Data + Power)
    - Pin 1: Rx+ (data receive)
    - Pin 2: Rx- (data receive)
    - Pin 3: Tx+ (data transmit)
    - Pin 4: -Vdc_return (+) (feeding power [+])
    - Pin 5: -Vdc_return (+) (feeding power [+])
    - Pin 6: Tx- (data transmit)
    - Pin 7: -Vdc (feeding power [-])
    - Pin 8: -Vdc (feeding power [-])

    LED
    - PoE, Power

    Power
    - Input: 100 – 240 V AC, 50 – 60 Hz
    - Power consumption: 42 watts (maximum)

    Environmental
    - Metal housing
    - Dimensions: 154 (L) x 72 (W) x 35 (H) mm (6.0 x 2.81 x 1.37 in.)
    - Weight: 0.79 kg (1.73 lbs.)
    - Operating temperature: 5 – 45°C (41 – 113°F)
    - Operating humidity: 10 – 90% RH, non-condensing
    - Storage temperature: -20 – 55°C (-4 – 131°F)

    • Gigabit High-Power PoE+ Injector
    • Power cable
    • Installation material (2 screws and drywall anchors)
    • Instructions

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
Open Google Reviews for our website ×