Shop
Networking
Bulk Wire & Cable
Cables
Racks & Enclosures
Tools
Audio/Video/Home
HDMI
Mounts
Security
Adapters
Usb/Mobile/Tablet
Electrical
Technical Furniture
Shop Brands
FireFold
ICC
Intellinet Network Solutions
Jonard Tools
j5create
Kendall Howard
Netstrand
Paige Electric
Platinum Tools
Quest
Rhino Brackets
SimplyBrands
Structured Cable Products
Vanco
Vertical Cable
Wavenet
World Cord Sets
View All
About Us
Customer Service
Returns
Order Status
Shipping Policy
Customer Reviews
Contact Us
70497971000
Support@FireFold.com
Free Shipping on Orders > $99.99 - *Some Exclusions May Apply
Filter
Fluke True RMS AC/DC Clamp Meter
Be ready for anything. The Fluke 376Clamp Meter offers improved performance perfect for a wide range of current measurement situations. With true-rms voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc mod es. Additionally, the Fluke 376 includes the new iFlex(tm) flexible current probe, which expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure around awkward sized conductors and improved wire acce ss. The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter. Safety Conformance EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV
Features and benefits iFlex flexible current probe expands the measurement range to 2500 A ac CAT IV 600 V, CA T III 1000 V True-rms ac voltage and current for accurate measurements on non-linear signals Min, max, average and inrush recording to capture variations automatically Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it Ergonomic design fits in your hand and can be used while wearing protective equipment Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement Three-year warranty Soft carrying case Safety conform ance EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV
Call For Quote: (704) 979-7100
FLUKE-115 True-RMS Digital Multimeter
Designed by electricians. Engineered by Fluke. For general purpose electrical and electronic test requirements, the Fluke 115 true-rms digital multimeter provides the perfect answer. Its simple operation, compact design and ease of use makes it perfect for quick verifications and field service use. The Fluke 115 displays true-rms voltage and current readings with 6000 count resolution, tests diodes, frequency, continuity and capacitance and provides Min/Max/Average readings to record signal fluctuations. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes a snap. Fluke 115 multimeters are independently tested for safe use in CAT III 600V environments. And check out other members of the Fluke 110 family: the Fluke 113 Utility Multimeter, the Fluke 114 Electrical Multimeter, the Fluke 116 HVAC Multimeter and the Fluke 117 Commercial Electrician"s Multimeter. Also check out the Fluke 114 Electrical Multimeter, the Fluke 116 HVAC Multimeter with Temperature and Microamps, and the Fluke 117, the Electrician"s Multimeter with Non-contact voltage. Large white LED backlight to work in poorly lit areas Resistance and continuity Frequency and capacitance Maximum Voltage ac/dc 600V 10A ac/dc current measurement (20 A overload for 30-seconds max) Min/Max/Average to record signal fluctuations CAT III 600 V safety rated Safety conformance All inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TV listed and VDE.
SPEC SHEET
Fluke Pro3000 Analog Tone and Probe Kit
The Pro3000 Analog Tone and Probe is your best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone technology. Angled bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks. The large loud speaker on the network probe allows you to hear through drywall, wood or other enclosures to find wires quickly and easily.
FLUKE-51-2 60HZ Digital Thermometer, Single Input, +/- 0.3 Deg C, +/- 0.05 Percent, 60 Hertz Noise Rejection
Laboratory accuracy. Wherever you go. The Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05 percent + 0.3degrees Celsius) in a rugged, handheld test tool. A single input thermomoeter, 60 Hz noise rejection.
Fluke MS2-100 MicroScanner2 Voice/Data/Video Cable Verifier
The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What’s more, its integrated RJ11, RJ45, and coax cable test ports support virtually any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever.
Today’s communications technicians have a lot more problems to deal with than just the cabling. They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem. Is there telephone voltage? What’s the polarity? Is there an Ethernet switch at the far end? Is PoE available? MicroScanner2 acknowledges this, giving technicians high power vision to verify today’s most common voice, data, and video services. That means faster, more comprehensive troubleshooting.
Spec Sheet
Fluke 10051501 D914 impact tool with EverSharp 110, EverSharp 66 blade & free blade
The D914 series punch down tool provides quality terminations on the first punch, helping to achieve the highest quality possible on network installations. It’s the only impact tool that combines torque and impact in one tool. It also includes a built- in hook and spudger into the handle. Use the hook to remove wires from any style block or to help trace wires. Use the spudger to remove the cross-connect module from the mounting bracket. Quick and easy blade replacement, and extra blade storage avail able in the handle.
Fluke FLK-1ACA1II-5PK VoltAlert Electrical Tester, 5 pack
VoltAlert Electrical Tester, Voltage Rating: 90 - 1000 VAC, Operating Temperature: -10 To 50 DEG C, Enclosure: IP40, Battery: (2) AAA Alkaline, C/US UL Listed, CSA Certified, CE Certified.
FLUKE-52-2 60HZ Digital Thermometer, Dual Input, +/- 0.3 Deg C, +/- 0.05 Percent, 60 Hertz Noise Rejection
Laboratory accuracy. Wherever you go. The Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05 percent + 0.3degrees Celsius) in a rugged, handheld test tool. A dual input thermomoeter, 60 Hz noise rejection.
FLUKE-179 ESFP Digital Multimeter, 1000 Volt, 10 Ampere, 50 Micro Ohm, 100 Kilohertz, 10000 Microfarad, 40 to 400 Deg C
With its precision, reliability, and ease of use, the Fluke 179 True-rms Digital Multimeter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 179 also offers a digital display with analog bar graph and built-in temperature measurements. Works When You Need It, Where You Need It. You can trust the Fluke 179 to get the job done in all of the messy, loud, high energy and high places you work. Backed by a lifetime warranty, the Fluke 179 is independently tested for safe use in CAT IV 600V/CAT III 1000 V environments. The Fluke 179 - Just One of Fluke’s Trusted Tools.
FLUKE 10176000 BLADE REPLACEMENT 110 TYPE FOR D814/056664 & D914/165946
110 blade
Fluke 19800009 TS19 network test set (butt set) with ABN
The TS19 Test Set combines all the essential test set features at an affordable price. This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a d ata line while in Monitor Mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of fe atures and price.
Fluke MRC625EFCSCLCKI Encircled Flux compliant test reference cord kit
Fluke Set of two LC Adapters for DTX-xFM2 power meter port
Set of two ST Adapters for DTX-xFM2 power meter port
Fluke Single-mode launch cable 9 m SC/SC
Designed for enterprise fiber
Many OTDRs (Optical Time Domain Reflectometers) used for fiber troubleshooting are designed for carriers and contain cumbersome and complicated features that enterprise users don’t need. Few OTDRs are built with features and usability for enterprise network engineers, SAN designers and cable installers.
As enterprises consume more storage resources and adopt higher bandwidth (40G, 100G) datacenter architectures, the resilience of the cabling infrastructure becomes highly dependent upon maintenance tools to ensure fiber reliability. OptiFiber Pro is the industry’s first purpose-built OTDR that meets the unique challenges of an enterprise fiber infrastructure. With its simple smartphone user interface and powerful feature set, the OptiFiber Pro turns anyone into an efficient and expert premise fiber troubleshooter or installer.
Fluke TL71 Test Lead Set
Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The Fluke TL71 Premium Test Lead Set has one pair of red and black comfort grip probes with flexible silicone-insulated, right-an gle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V.
Fluke Solvent Pen
Contaminated end-faces are the #1 cause of fiber link failure. Dirt and contaminants cause insertion loss and back-reflection that inhibit the light transmission and causes havoc with transceivers. Since dirt can migrate from one end-face to another up on mating, both sides of any connection must be inspected. Mating contaminated connectors can cause permanent damage as microscopic debris can be crushed between end-faces during physical contact. For years, isopropyl alcohol (IPA) was used to clean fi ber end-faces but now there are customized solvents that are far superior, such as Fluke Networks Fiber Optic Solvent Pen. Most importantly, this specialized solvent is more effective than IPA at dissolving all contaminants, especially non-ionic compou nds such as buffer gel and pulling lube. You will get a better clean every time and remove more contamination. The Fluke Networks Solvent Pen has a lower surface tension that allows it to envelop particles and debris, thus effectively lifting them from the surface of the end-face as they are carried away by a wipe or swab. Many smaller particles carry a charge that bonds them to the ferrule or end-face. The solvent is oxygenated to neutralize this charge so the charged particle can be wiped away and additional particles are not attracted onto the end-face. When cleaning end-faces inside ports or equipment, the evaporation rate of solvents become significant as it is harder to guarantee removal of all solvent. Fluke Networks customized solvent has an evaporation rate tailored to stay long enough to work yet still disappear before mating. It evaporates much faster than IPA. Last, IPA is highly hygroscopic and therefore draws water vapor that can then dry on the end-face and leave a residue, whic h can appear as a "halo."
Fluke MRC50EFCSCSCKIT Encircled Flux Multimode Fiber Module Test Kit
Single-mode launch cable 9 m SC/LC
Fluke 10051120 D914 impact tool with EverSharp 110 & EverSharp 66 blade
Fluke FLUKE-62 MAX Infrared Thermometer, Single Laser
The Fluke 62 MAX infrared thermometers are everything you’d expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard to reach areas for repair and maint enance. Small in size, extremely accurate and yet easy to use . IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop.
Fluke 10230100 8-wire in-line modular adapter
Fluke Networks in-line banjo modular adapters allow you to easily complete testing and obtain circuit access on working lines without disrupting service. Each adapter has a number of advantages including angled copper contacts that prevent alligator cl ips from coming off during testing, small holes in each contact for easy probe insertion, and clear circuit markings on the sides and bottom of the unit. Our standard Modular Adapter has four clearly marked contacts for proper termination, and provides field technicians with a quick connection to modular telephone jacks using any standard butt-set equipped with spring clips.
Fluke DTX-LION
Fluke MT-8200-60-KIT IntelliTone Pro 200 LAN Toner and Probe Kit
Get advanced vision for locating network cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. Our new IntelliTone Pro 200 LAN Toner and Probe Kits finds the cables others can't.
The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner and probe to offer digital and analog signaling all in one network toner and probe. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.
The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. This network cable toner and probe's breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.
Fluke 114 Digital Multimeter
Designed by electricians. Engineered by Fluke. Designed for easy one-hand operation, the Fluke 114 true-rms digital multimeter is the perfect troubleshooting tool for "go/no go" testing. Its AutoVolt capability automatically switches to measure AC or D C voltage, whichever is present. The LoZ function helps identify so-called "ghost" voltage and prevent false readings. The Fluke 114 displays true-rms voltage and current readings with 6000 count resolution, and tests frequency, continuity and resistan ce. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes easy. Fluke 114 multimeters are independently tested for safe use in CAT III 600V environments. And check out other members of the Fl uke 110 family: the Fluke 113 Utility Multimeter, the Fluke 115 Field Service Multimeter, the Fluke 116 HVAC Multimeter and the Fluke 117 Commercial Electrician’s Multimeter. AutoVolt: automatic ac/dc voltage selection Large white LED backlight to work in poorly lit areas Resistance and continuity Min/Max/Average to record signal fluctuations CAT III 600 V safety rated Safety conformance All inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TV listed and VDE.
Fluke 10055200 D814 impact tool with EverSharp 110 & EverSharp 66 blade
Fluke 10061501 D914S impact tool with EverSharp 110, EverSharp 66 blade & free blade
SoftTouch D914S Impact Tool offers an ergonomic design with a soft rubber handle for better grip and rounded edges to absorb more of the impact recoil. Includes built-in probe pic/spudger and torque, allowing you to choose from high-and low-impact settings
Fluke SRC-9-SCSC-KIT Fiber Loss Test Reference Cord Kit, 2 Meter
JACKRAPID REPLACEMENT BLADE HEAD
Fluke JR-SYS-UNI-1 Jack Rapid Termination Tool for Systimax MPS100E & Uniprise UNJ600/500/300 Outlets / Jacks
Fluke 10055110 D814 impact tool with EverSharp 110 blade
The D814 Impact Tool is a deluxe, all-in-one, telecom punchdown tool and comes with the 66/110 blade. Impact wheel has high and low settings. Automatic spring mechanism provides the right impact to seat and/or terminate wires
Pro-Tool Kit IS60
All the professional tools you need to cut, strip, clean and connect network phone and data lines to blocks and jacks. Bundled together in our sleek form-fitting PVC Dur-A-Grip tool pouch-holds your tools securely inside, even upside down. Five tool ki t combinations to choose from to meet a multitude of applications.
Fluke NFA-SC Set of Two SC Adapters for DTX-xFM2 power meter port.
Today’s enterprise data networks increasingly rely on fiber optic cabling, making it more important than ever for installers and network owners to use Optical Loss Test Sets (OLTS). OLTS help users certify and document their fiber links to meet established industry standards and to protect against network downtime and lost revenue.
The DTX-CLT CertiFiber® Optical Loss Test Set allows you to accurately certify two fibers concurrently over two wavelengths according to custom requirements or established industry specifications. Quickly and efficiently conduct troubleshooting with a conveniently integrated Visual Fault Locator (VFL).
Fluke NFK3-DPLX-LC Duplex Singlemode Test Reference Cords (Set of 2) for LC Adapter
Fluke 10178600 EverSharp 110/66 cut blade
Multimeter Digital True Rms, Frequency, Dutycycle, Touchhold, Min-Max, Pointer
Fluke JR-LEV-2 JACKRAPID TERMINATION TOOL
Fluke Encircled Flux compliant test reference cord kit
Encircled Flux compliant test reference cord kit for testing 50µm LC terminated fibers. Contains: 2 2m EF-TRCs with SC/LC, 2 2m TRCs with LC/LC
Fluke JR-SYS-2 Jack Rapid Termination Tool for Systimax MGS400,MGS500,MFP420, and MFP520
Fluke Enhanced Fiber Optic Cleaning Kit
Enhanced Fiber Optic Cleaning Kit - Includes an IBC OneClick 1.25mm cleaner, an IBC OneClick 2.5mm cleaner, an IBC OneClick MPO cleaner, a solvent pen, a cleaning cube and a softcase
Fluke Networks QuickClean-2.5-2.5mm Cleaner
The Fluke Networks QuickClean-2.5-2.5mm Cleaner is used to clean SC, ST, FC and E2000 connectors with either UPC or APC polished ferrules. Unlike traditional swab cleaners that rely on the technique of the user, the Quick Clean Cleaners provide consist ent cleaning every time. The user can easily engage the cleaner using a simple push motion and the user will hear a "click" sound when the process is completed. With the click of a button, any fiber installer or data center technician can clean up to 5 00+ fiber ports. These cleaners are designed to fit into pockets without contamination from dirt and grease.
Fluke EverSharp 110 blade
Fluke Thermocouple Bead Probe
The innovative SureGrip design from Fluke is now available in select temperature probes. The soft rubber handle combined with a new ergonomic shape is so comfortable to hold that you’ll forget about the probe and focus on the measurement. All SureGrip probes have an improved, more flexible strain relief for a long life.
QuickClean-1.25-5P Cleaner for 1.25 mm LC and MU Connectors and End Faces
The Fluke Networks Quick Clean Cleaner is designed to clean fiber end-faces. This fiber connector cleaner will clean MU and LC connectors. Contaminated connectors and end-faces are quickly cleaned of road dust, skin oil residue, salt water residue, gra phite dryer lint, hand lotion and more. Fiber optic ferrules are cleaned for both APC and UPC type connectors. Each Fluke Networks Quick Clean fiber optic cleaner features antistatic molding and will clean over 500 end-faces per unit.
Fluke 44300000 D-SNIPS SCISSORS
×
×