FireFold

Cat6 Ethernet Patch Cable, Black

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, versatility and ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat6 Ethernet Patch Cable, Blue

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat6 Ethernet Patch Cable, White

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

CAT6 Patch Panel - 12/24/48/96 Ports

Our Cat6 Patch Panel is designed to provide amazing performance and cable management. Each Cat6 Patch Panel comes with 110-type termination while meeting and exceeding TIA/EIA-568B.2/568B.2-1 Cat.6 ISO/IEC 11801 hardware specifications.

These patch panels accommodate top, bottom or side cable entry. This leaves plenty of options on being able to get to your cables once you have everything set up. These IT patch panels are also able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find a wire to fit.

Each patch bay is a high-density 19-inch panel.

Cat6 Ethernet Patch Cable, Yellow

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat6 Ethernet Patch Cable, Red

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat6 Ethernet Patch Cable, Green

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Black

Quality You Can Depend On And Performance That Can't Be Beat

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

Surface Mount Box 

When installing a wall plate isn't practical, these surface mounts will do the trick. They're convenient, simple, and help maintain that professional look.

The compact, space saving design is easy to install and accommodates any 110 style networking keystone jack. Each surface mount comes individually packaged with screws and padded dual sided tape.

Cat6 Ethernet Patch Cable, Gray

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat6 Ethernet Patch Cable, Orange

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat6 Ethernet Patch Cable, Purple

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

CAT5e Ethernet Patch Cable Snagless in White, RJ45, M/M

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Cat5E Patch Panel 110 Type

Networking Made Simple

Our Cat5E Patch Panel is designed to provide amazing performance and cable management. Each Cat5E Patch Panel comes with 110-type termination while meeting and exceeding EIA/TIA TSB-40 Cat5E connecting hardware specifications.

What makes it so simple?

Besides the 110 termination that this network patch panel offers, there are 12 individual Cat5E ports on the front side. Once you get your cables terminated on the one side, you just plug and go on the other. This is a very quick and easy solution for being able to swap out devices at any time. Plus, with numbered ports, you can easily keep track of what is plugged in where for better organization.

Need to mount this up where you won’t be able to reach it so easily? These patch panels accommodate top, bottom or side cable entry. This leaves plenty of options on being able to get to your cables once you have everything set up. These IT patch panels are also able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find wires to fit.

What makes these so great?

Each patch bay is a high-density 1.75 inch by 19-inch panel. This product is 1U, with a U (unit) being the standard size for a single rack interval. While others are 2 and 3U, there will be no such waste of space here.

These network panels meet TIA/EIA-568B.2/568B.2-1 Cat.5E ISO/IEC 11801 and EN 50173-1 specifications, so they are up to the latest standards. UL certified, they have been also tested to the highest standard for safety.

Cat6 Keystone Jack Toolless For Patch Panels - FireFold

The Cat6 Keystone Jack

The Cat6 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat6 Jack provided by FireFold provides outstanding performance, exceeding the ANSI/TIA/EIA-568-B.2 industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat6 jack provided by us comes with a standard RJ45 plug on the outside. These ethernet jacks are toolless. The unique toolless design does not require the use of a punch down tool. This can make things substantially faster when having to put many of these RJ45 jacks into place. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with an HDMI keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

CAT5e Ethernet Patch Cable Snagless in Red, RJ45, M/M

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Cat5e Ethernet Patch Cable Snagless in Gray, RJ45, M/M

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

 1U Hinged Wall-Mount Patch Panel Bracket

1-2U wall mount bracket for installation of patch panels or other 19" rack-mount devices. Hinged for easy access to wiring. Panel screws are included.

LC-LC 10 Gigabit Multimode Duplex OM3 50/125 

These 10 Gigabit fiber optic cables are backward compatible with existing equipment. They feature almost three times the bandwidth of traditional 62.5/125 multimode fiber.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Flat Cat6 Patch Cable RJ45 Connectors

FireFold’s Category 6 (CAT6 Ethernet cable) Ethernet cables are made to be at market standards, meeting and exceeding the TIA/EIA-568 standard. Each of these Cat6 patch cables are able to perform up to 550 MHz with a 50 micron gold plated contact RJ45 connector at either end of the cable to help against corrosion.

The CAT6 Ethernet cables are constructed from four flat 32 AWG stranded pair pure copper wire strands in a PVC cable casing. This means that the cables are more flexible and more readily usable for patch cables.

The PVC jacket that wraps around these cables is CM type, which means it is good for general use. The jacket itself is flatter than most, making it easier to run under carpeting or around baseboards. A molded strain relief boot rests upon each connector, helping prevent snags and damage to your cable.

CAT6 Ethernet cables are backwards compatible with any 10BaseT or 100BaseT network cards and hubs, allowing you to buy our cables and not have to switch out your older equipment. This simplifies nearly any network setup. Please note, however, that you must upgrade your equipment in order to take full advantage of the higher frequency and transfer rates.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Blue

Quality You Can Depend on On And Performance That Can't Be Beat

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

Cat6 Keystone Jack For Networking Solutions - Coupler

The Cat6 Keystone Jack

The Cat6 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat6 Jack provided by FireFold provides outstanding performance, exceeding the ANSI/TIA/EIA-568-B.2 industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

These Cat6 Jacks fit into RJ45 wall plates, patch panels, or any standard RJ45 slot. They are perfect for connecting two patch cords without any punching down. Great for an application where you would be switching around wires on both sides of the keystone location.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with an HDMI keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Cat6A Shielded Patch 26AWG 10G Cable

FireFold’s Category 6 (CAT6A Ethernet Cable) shielded Ethernet cables are made to meet market standards and assure the best performance in today’s high-speed networks. CAT6a shielded cables are backwards compatible with any 10BaseT or 100BaseT network cards and hubs, allowing you to change out your old cables for these without having to change out your equipment.

Cat6a is the latest standard that can run up to a 600 MHz frequency, transferring up to 10-Gigabits through appropriate equipment. The Cat6a shielded cables still hold a 50-micron gold plated contact within the RJ45 connectors, just as all of FireFold’s Ethernet cables to help prevent corrosion. A boot rests upon each connector, helping prevent snags and damage to your cable.

These CAT6a shielded cables are constructed from four 26 AWG shielded twisted pair pure copper wire strands in a PVC cable casing. The SSTP (screen shielded twisted pair) wires of these Cat6a patch cables are twisted together to reduce cross talk and the individual pairs have shielding around them. The pairs as a unit have an additional braided screen around them.

With a variety of lengths available, you can get the perfect Cat6a patch cable to meet your needs and get your network setup with ease. You can run lengths of up to 328 feet with these cables.

Cat5E Ethernet Patch Cable Snagless in Black, Shielded

350 MHz FTP Cords With Performance to Spare

When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.

When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.

For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.

Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.

As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.

Cat8 Solid S/FTP Bulk Wire, Blue

Cat8 Solid S/FTP Bulk Wire 23AWG 40Gbps Blue

Designed for 25g/40G Base-T applications, this category 8 cable boasts a bandwidth of 2000MHz and up to 40Gbps network transmission speeds (4 times faster than Cat6A!) This cable performs excellently with PoE++ applications and has been tested at 30 meters with a Fluke DSX-8000 cable analyzer.

The Cat5E Keystone Jack - Flame Retardant 

The Cat5 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat5 Jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568-B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backwards compatible with all previous standards.

These Cat5 Jacks fit into RJ45 Wall plates, Patch Panels, or any standard RJ45 slot. They are perfect for connecting two patch cords without any punching down. Great for an application where you would be switching around wires on both sides of the keystone location.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

350 MHz FTP Cords With Performance to Spare

When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.

When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.

For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.

Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.

As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.

CAT5e Ethernet Patch Cable Snagless in Purple, RJ45, M/M

The Enhanced Performance You Need When It Couldn't Be More Important

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

Cat6 Cable by the Foot

Have the need for bulk cable, but don't need the whole box? FireFold has the answer for you! Bulk cable sold by the foot. This cable will be rolled out to your exact requested length.

Bulk (1000 ft) category 6 cable that has a bandwidth of 550 Mhz. The box is reinforced and allows for easy distribution of cable. Lining this cable is PVC material, which is durable yet flexible.

This cable offers speed. Since media is becoming very rich and on demand in today's networks, this extra bandwidth--nearly double of Cat5-- allows Cat 6 to be used on networks that are optimized for high bit rates.

Since bulk cable is normally used in intervals, the box that it comes in is almost as important as the cabling. Our boxes are reinforced to generally protect the cable. Also, they are easy to pull allowing the cable to be virtually kink less while being pulled out of the box.

PVC jackets are very common in networking cables and ours is no exception. This material is strong, protective, and flexible which are the characteristics desired in cables.

RJ11 Plug for Stranded Flat Wire

This is an RJ11 Plug for Stranded Flat Wire. These are designed for voice applications and most commonly used to terminate telephone lines. This connector contains gold-plated contacts and uses the 6 Position 4 Conductor wiring standard.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Red

Quality You Can Depend On And Performance That Can't Be Beaten

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

LC-LC Singlemode OS2 Duplex 9/125 Fiber Patch Cable

Single-Mode - In optical fiber technology, single mode fiber is an optical fiber that is designed for the transmission of a single ray or mode of light as a carrier and is used for long-distance signal transmission. For short distances, multimode fiber is used.

• Used to connect patch panels and/or network devices that utilize LC to LC style connectors and require 9/125 Single mode cabling
• 100% tested
• Test report included in each cable
• 1/2 Markers easily identify the TX and RX connector on each end of the assembly

CAT6 Mini Patch Panel with 12 Ports

Tiny But Powerful

Our Cat6 Patch Panel is designed to provide amazing performance and cable management. Each Cat6 Patch Panel comes with 110-type termination while meeting and exceeding TIA/EIA-568B.2/568B.2-1 Cat.6 ISO/IEC 11801 hardware specifications.

Compared to standard patch panels, this mini patch bay weighs in at under a pound. It comes with its own mounting bracket, allowing you to easily get this IT patch panel up, out of the way, and ready to go.

Simple to Use

These IT patch panels are able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find wires to fit. Plus, with entry access available from the top, bottom, and side - you can still easily access your cables once everything is setup.

Compacted Perfection

Each patch bay is a high-density panel design, made for saving space.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, White

Quality You Can Depend on On And Performance That Can't Be Beat

Regardless of the type of network, you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6

Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables is obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears, and other issues during installation or ongoing maintenance in the future. This construction also provides some much-needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60-day money-back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry-leading customer support team, and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

The Cat5e Keystone Jack - FireFold

The Cat5 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat5 Jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568-B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat5 jack provided by us comes with a standard RJ45 plug on the outside. These ethernet jacks are toolless. The unique toolless design does not require the use of a punch down tool. This can make things substantially faster when having to put many of these RJ45 jacks into place. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with an HDMI keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Cat6A Ethernet Patch Cable

These network cables enable 10-Gigabit data transmission over a 4-connector twisted-pair copper cable, allowing connection distances of up to 100 meters. Current Cat6 cabling systems may only support 10-Gigabit Ethernet over limited distances. The Cat6a draft extends the Cat6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable.

Cat6a also utilizes a new generation of connecting hardware that is superior to standard Cat6.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, Green

Quality You Can Depend On And Performance That Can't Be Beat

Regardless of the type of network you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much of success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6 Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables are obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears and other issues during installation or ongoing maintenance in the future. This construction also provides some much needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60 day money back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry leading customer support team and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

Cat6A Ethernet Patch Cable

These network cables enable 10-Gigabit data transmission over a 4-connector twisted pair copper cable, allowing connection distances of up to 100 meters. Current Cat6 cabling systems may only support 10-Gigabit Ethernet over limited distances. The Cat6a draft extends the Cat6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable.

Cat6a also utilizes a new generation of connecting hardware that is superior to standard Cat6.

Cat5E Ethernet Patch Cable Snagless in White, Shielded

350 MHz FTP Cords With Performance to Spare

When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.

When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.

For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.

Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.

As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.

CAT5E Surface Mount Box - White & Ivory

When installing a wall plate isn't practical, these surface mounts will do the trick. They're convenient, simple, and help maintain that professional look.

The compact, space-saving design is easy to install and come installed with one or two Cat5E Keystone Jacks.

Cat6 Slim Ethernet Patch Cable, Blue

FireFold's Cat6 slim patch cable uses 28 AWG 4 pair UTP Ethernet wire and is designed to optimize the space in telecommunication room and data center. Cable diameter is mere 3mm (0.12") compared to standard 5.8mm (0.23") and provides 48% reduction in diameter and 73% reduction in space. Small size means cables are easier to manage, higher-density patching is more feasible, and valuable rack space can be used for equipment and ventilation, rather than cable management. It is also suitable for residential installation to keep cabling around the cable/DSL modem and router low profile. Our slim patch cable comes with neat looking clear strain relief boots.