Evolution

HDMI Extender 4K 70m

The Evolution by Vanco EVEX4K70 HDMI Extender over single Cat6 with Digital Audio Breakout, HDMI Loop-out, IR, and PoE, extends 4K@60Hz, 4:4:4 Chroma, and HDR10 up to 230ft/70m. Vanco’s patented bi-directional Power over Ethernet (PoE) Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. The transmitter is equipped with an HDMI loop-out for local monitoring or use with other distribution products. The receiver features digital optical output to break multi-channel audio out to amplifiers for a better listening experience. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. In addition, bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR10, with options for connecting additional displays and breaking out audio, the EVEX4K70 is a great plug and play solution for connecting the latest components!

The EVEX4K70 includes two units: transmitting unit (EVEX4K70-TX) and receiving unit (EVEX4K70-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals over a single Cat6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals.

*NOTE – All specifications and ratings for the EVEX4K70 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieve rated distance, and to maximize resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.

Evolution 4K HDMI Extender over Single Coax Cable with Bi-directional IR

The Evolution by Vanco EV4K2004 HDMI Extender can send and receive 4K resolutions over single RG6 coaxial cable with Bidirectional IR. Capable of extending 4K@60Hz up to a distance of up to 330ft/100m and 4K@60Hz with HDR10 High Dynamic Range up to 230ft/70m. The EV4K2004 also features bi-directional IR, which allows for control of the source or display. Also features dynamic EDID management, which allows and encourages source and display “handshake” for seamless integration. Compact design with mounting ears included, for an easy and flexible installation. Can’t run a Cat6 cable to a location? No problem, the EV4K2006 is a great solution for applications which already have an existing RG6 coaxial cable in place.

The EV4K2004 includes two units: transmitting unit (EV4K2004-TX) and receiving unit (EV4K2004-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one RG6 coaxial cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and control signals. The EV4K2004 offers the most convenient solution for HDMI extension over a single coaxial cable with long distance capability, and provides a solution in applications where additional cables cannot be installed.

*Installation Note: RG6 coaxial cable must be used, RG59 and mini coax will not work with this product; coaxial connections must be BNC and home-run cable strongly recommended.

HDMI® Extender over Fiber with KVM USB Pass-through

The Evolution by Vanco EVEXFBRK1 HDMI Extender with KVM, bi-directional IR, and RS-232, extends 4K HDR video and audio signals up to 984ft/300M over multi-mode fiber optic cables, and 6.2mi/10km over single mode fiber optic cables and modules! USB 2.0 KVM allows for controlling a security NVR/DVR, computer, NAS system, or any other component that is controlled by USB with this extender. No need to run a separate line or extender just for KVM control! Bi-directional IR pass-through allows for source and/or display control. Also features RS-232 pass-through for additional control. For extending HDMI with 4K HDR resolution at an extreme distance, the EVEXFBRK1 is a great solution for any application.

The EVEXFBRK1 includes two units: transmitting unit (EVEXFBRK1-TX) and receiving unit (EVEXFBRK1-RX). The transmitting unit is used to capture the HDMI input with control signals and carries the signals via fiber optic cables. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. Both units require power.

Evolution HDMI over IP Transmitter/Receiver

The Evolution by Vanco EVOIPLITE HDMI over IP Transmitter/Receiver is a complete audio, video, and control product over ethernet system. As a whole, the system has the ability to send multiple sources to multiple displays along with IR and RS232 pass-through, analog and digital audio breakout in TX mode, video up to 1080P@60Hz, with POE up to 100m when connected to a POE enabled switch off of a single Cat6 cable. This one single unit can be set to transmit or receive signals. When connected to a network with internet, the EVO-IP Cloud allows for additional features such as scheduling events or maintenance, remote monitoring of a system including remote diagnostics and troubleshooting, as well as voice control capabilities with Alexa! With an IP-less installation option as well as any new sources/displays being discovered automatically within the system, the EVO-IP HDMI over IP system is the fast, easy, and cost effective solution for both residential and commercial installations.

4K Wireless HDMI Extender with HDMI Loop-Out

The Evolution by Vanco EV4KWHDMI Wireless HDMI Extender with IR, extends 4K ultra-high definition video and audio signals up to 164ft/50m wirelessly. Directional IR allows for the source to be controlled wirelessly at the display location. Features an HDMI loop-out, where an additional local display can be connected. With no line of sight required, the wireless signal can travel through floors and walls. If a WiFi signal can reach it, the EV4KWHDMI can. The EV4KWHDMI is a perfect plug and play solution for applications where a cable cannot be run, such as a TV mounted above a mantel or outdoors on a patio.

• Transmission distances may vary depending on the environment.
• Signals may be reduced or completely lost by solid structures such as walls, bricks, and glass.
• The surrounding wireless signal may cause certain interference to the transmission, and the channel can be switched to reduce the interference.

HDMI EDID Sync Recorder

The Evolution by Vanco EVRC5002 HDMI EDID Recorder is an EDID Reader/Writer/Retimer that has the ability to emulate EDID (Extended Display Identification Data) information. For use in applications where EDID issues are occurring. Features the ability to set EDID from the main unit or from a connected computer using the included software. Controllable via USB, the EVRC5002 stores and recalls EDID information from either source or display and supports HDCP. The EVRC5002 saves time from troubleshooting and having to replace equipment. This EDID management allows and encourages source and display “handshake”, a perfect solution for compatibility issues.

Extended Display Identification Data (EDID) is a standard data format that contains basic information about the display and its capabilities, including vendor information, maximum image size, color characteristics, factory pre-set timings, frequency range limits, and character strings for the monitor name and serial number.

The information is stored in the display and is used to communicate with the system through a Display Data Channel (DDC). The system uses this information for configuration purposes, so the monitor and system can work together.

HDBaseT Extender Set with Wall-Plate Transmitter

The Evolution by Vanco EVWP3000 HDBaseT extender with single-gang wall-plate transmitter supports resolutions up to 4K@60Hz, 4:4:4 chroma over a single Cat5e/6 cable up to 131ft (40m) or 1080p@60Hz up to 230ft (70m). Featuring HDBaseT technology, this extender set supports audio, video, IR, and Power over HDBaseT (PoH) that transmits power over the Cat5e/6 cable. The EVWP3000 is a great wall-plate solution for extending HDMI signals using HDBaseT technology for both residential and commercial installations.

USB 3.2 Extender Over HDBaseT with USB-C

The EVEXUSB32 supports up to four USB 3.2 devices, such as webcams, keyboards, mice, and storage devices using USB-A and USB-C connections. Power over HDBaseT (PoH) technology allows for a single power supply on either end while two 1.5A ports (USB-A & USB-C) and two 1A ports (USB-A) provide power to the connected devices. With its reliable transmission and versatile connectivity options, the EVEXUSB32 supports corporate, medical, security, educational, and other applications.

HDBaseT™ 4K@60Hz, 4:4:4 Chroma, HDR Extender 164ft/50m

The Evolution by Vanco EVEX4K50 HDBaseT 4K@60Hz, 4:4:4 Chroma, HDR Extender with Bi-directional IR, and Power over Cable (PoC) extends 4K/60Hz, 4:4:4 with HDR along with audio, and RS232 at a distance of up to 164/50m over a single Cat5e/6 cable. Also able to pass 1080p/60Hz up to 230ft/70m. Power over Cable (PoC) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. In addition, RS-232 and bi-directional IR pass-through allows for source and/or display control. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR, the EVEX4K50 is a great plug and play solution for connecting the latest components!

The EVEX4K50 includes two units: transmitting unit (EVEX4K50-TX) and receiving unit (EVEX4K50-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EVEX4K50 offers the most convenient solution for 4K extension over a single Cat5e/6 with Power over Cable, and is the perfect solution for any application.

EVO-IP Control Box

Allows for AV distribution, video wall and digital signage capability, control, and more. Only one unit needed for each application.

4K 4×2 Seamless Audio and Video Matrix with Multiview

Evolution Premium 4K HDMI® Splitter

The Evolution by Vanco EVSP4K12, EVSP4K14 and EVSP4K18 with HDCP 2.2, 4K/60Hz, and 4:4:4 chroma capability, are the most up to date HDMI splitters that are compliant with HDCP 2.2 displays and sources. Also features EDID management, with different modes to ensure compatibility with source and display combinations. Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio for advanced audio setups. Take any 4K source and split the signal to multiple 4K displays to ensure the highest quality possible with the Evolution 4K HDMI Splitters!

Note: To achieve 4K video quality, all connected displays must be able to handle 4K resolution. Any lower resolution display connected, will affect the overall resolution the splitters output to all ports.

Evolution 4K HDR 1×4 HDMI Splitter over Cat6 Cable

The EV4K7014 is an HDMI splitter that allows one HDMI input to be split and sent to up to five displays simultaneously. With four outputs over UTP, and one output over HDMI, the EV4K7014 allows for a local display connected, or to daisy chain additional units to gain more outputs. The EV4K7014 includes four receivers (EV4K7014-RX) as a kit, which are PoE, and do not require any power supplies at the display end. Extends 4K@60Hz 4:4:4 with HDR10 and IR control up to 230ft/70m over a single Cat6 cable. IR accessories are included to allow IR pass-through for controlling the source at each UTP display location. For splitting and distributing one single source to multiple displays, while extending over Cat6, the EV4K7014 is a great solution for any application with the ability to expand.

*NOTE - All specifications and ratings for the EV4K7014 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieving rated distance, and maximizing the resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.

Evolution 4K Multi-Format Wireless Collaboration Switcher

The EVSW4K41 Evolution by Vanco 4K 4x1 wired and wireless collaboration switcher features a wireless Miracast/Airplay input, two HDMI inputs, and one USB-C input to a single HDMI output. Switch from multiple presenters to one display wired or wirelessly. With both Miracast and Airplay support, cast wirelessly from computers, tablets, and mobile devices to the display with ease. Supports HDMI 2.0b, 4K@60Hz, 4:4:4, HDR and HDCP 2.3. HDMI audio de-embedding built in to break out audio to an amplifier or audio distribution system. USB 3.0 device extension by providing two type-B USB ports for host connection, and two type-A USB ports for USB devices such as camera, microphone, keyboard etc., as well as soft codec capabilities to easily integrate with video conferencing software. Control with 3rd party systems via RS232 commands, in addition to manual and “auto” switching modes. For any presentation and collaboration needs that requires multiple presenters to switch to and from wired and wirelessly, with options for audio and USB, the EVSW4K41 is the perfect solution.

HDMI KVM Extender 4K/60Hz HDR 230ft/70m

The Evolution by Vanco EVEXKVM3 HDMI Extender over single Cat6 with Digital Audio Breakout, HDMI Loop-out, KVM, and PoE, extends 4K@60Hz, 4:4:4 Chroma, and HDR10 up to 230ft/70m. USB pass-through allows for controlling a security NVR/DVR, computer, NAS system, touch screen display, or other components that are controlled by USB with this extender. No need to run a separate line or extender just for USB control! Vanco’s patented bi-directional Power over Ethernet (PoE) Technology transmits power over Cat6, allowing either the Transmitter or Receiver to be powered without the use of a power supply for an easy installation. The transmitter is equipped with an HDMI loop-out for local monitoring or use with other distribution products. The receiver features digital optical output to break multi-channel audio out to amplifiers for a better listening experience. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. For extending full 4K resolution with up to 60Hz, 4:4:4 chroma subsampling, and HDR10, with options for connecting a keyboard, mouse, and other USB peripherals, the EVEXKVM3 is a great plug and play solution for connecting the latest components!

The EVEXKVM3 includes two units: transmitting unit (EVEXKVM3-TX) and receiving unit (EVEXKVM3-RX). The transmitting unit is used to capture the HDMI input with KVM signals and carries the signals via one cost effective Cat6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing KVM signals. The EVEXKVM3 offers the most convenient solution for HDMI extension over a single Cat6 with Power over Ethernet, and is the perfect solution for any application.

NOTE: – All specifications and ratings for the EVEXKVM3 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieve rated distance, and to maximize resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.

Evolution Uncompressed 4K HDBaseT Extender

The Evolution by Vanco EVEXHDB3 HDBaseT 3.0 extender offers multiple options for pass-through control, and audio including eARC and ARC, along with PoH while being able to extend uncompressed 4K with HDR up to 164ft/50m over a single Cat6 or up to 328ft/100m using Cat6a/7. Control signals include bi-directional IR pass-through to control IR sources, either way, bidirectional USB for KVM pass-through to control sources with a keyboard and mouse, and RS-232 pass-through for 3rd party control. Audio options include the ability to embed audio from a separate audio source, de-embed or extract audio from the HDMI signal, as well as eARC (Enhanced Audio Return Channel) and ARC (Audio Return Channel). In addition, the EVEXHDB3 allows for 1Gb ethernet pass-through. A great solution when trying to extend a network for streaming or control along with the audio and video signals over a single Cat6/6a/7 cable. The transmitting unit is equipped with an HDMI loop-out, to connect to a local display, combine with another HDMI distribution product, or extract audio. Power over HDBaseT (PoH) Technology transmits power over Cat6/6a/7, allowing either the Transmitter or Receiver to be powered without the use of a power supply. For extending uncompressed 4K with HDR, along with checking multiple boxes for control and audio options and more, the EVEXHDB3 is the perfect solution for any application.

The EVEXHDB3 includes two units: transmitting unit (EVEXHDB3-TX) and receiving unit (EVEXHDB3-RX). The transmitting unit is used to capture the HDMI input with additional signals and carries the signals via a single Cat6/6a/7 cable. The receiving unit is responsible for equalizing the transmitted HDMI signals and reconstructing other signals.

*NOTE – All specifications and ratings for the EVEXHDB3 have been tested and confirmed using Cat6 and Cat6a cabling. Cat5e is not recommended.

 2.0 HDBaseT 4x4 Matrix w/HDMI mirroring outputs & Downscaling, 4K/60Hz

EVMX44PRO

The Evolution by Vanco EVMX44PRO 4K 4x4 HDBaseT™ Audio and Video Matrix Switcher with ARC, IR, IP and RS-232 allows 4 HDMI sources to be distributed to up to 4 displays simultaneously, with mirrored HDMI outputs for a total of 8 outputs! The EVMX44PRO is capable of transmitting 4K@60Hz, 4:4:4 Chroma Subsampling, and HDR up to 131ft/40m over a single Cat6 cable, and 4K@60Hz, 4:4:4 Chroma Subsampling with HDR10 and Dolby Vision on the HDMI inputs and HDMI outputs. For control, the EVMX44PRO features multiple methods including simple control using the front panel control, IR control, RS-232, and an easy to use UI accessible via IP. Control switching sources to displays from a computer or a wireless device such as a tablet or mobile phone. Need an audio matrix as well? The EVMX44PRO also features the ability to send any HDMI audio input to up to 4 zones. Compatible with both the EVRXHD2 and EVRXDSC HDBaseT receivers to create a modular matrix unit, add downscaling, ARC, audio extraction, and RS-232 to any HDBaseT output. For switching multiple sources to multiple displays using HDBaseT technology, with many features for control, audio switching, ARC, 4K HDR resolution, and scaling, the EVMX44PRO is a great choice for any application.

EVMX88PRO

The Evolution by Vanco EVMX88PRO 4K 8x8 HDBaseT™ Audio and Video Matrix Switcher with ARC, IR, IP and RS-232 allows 8 HDMI sources to be distributed to up to 8 displays simultaneously, with mirrored HDMI outputs for a total of 16 outputs! The EVMX88PRO is capable of transmitting 4K@60Hz, 4:4:4 Chroma Subsampling, and HDR up to 131ft/40m over a single Cat6 cable, and 4K@60Hz, 4:4:4 Chroma Subsampling with HDR10 and Dolby Vision on the HDMI inputs and HDMI outputs. For control, the EVMX88PRO features multiple methods including simple control using the front panel control, IR control, RS232, and an easy to use UI accessible via IP. Control switching sources to displays from a computer or a wireless device such as a tablet or mobile phone. Need an audio matrix as well? The EVMX88PRO also features the ability to send any HDMI audio input to up to 8 zones. Compatible with both the EVRXHD2 and EVRXDSC HDBaseT receivers to create a modular matrix unit, add downscaling, ARC, audio extraction, and RS-232 to any HDBaseT output. For switching multiple sources to multiple displays using HDBaseT technology, with many features for control, audio switching, ARC, 4K HDR resolution, and scaling, the EVMX88PRO is a great choice for any application.