Non-Contact Voltage Detector
Trying to pinpoint an issue or need to verify that a device is receiving power? Test for voltage from a safe distance and get immediate results with this non-contact voltage detector. This meter emits an audible beeping sound and lights up with an intense, bright LED indicator when it detects voltage nearby. It's great for home wiring projects, electrical, and appliance repair. As an added bonus, it has an on board LED flashlight to illuminate dim areas where you might have trouble seeing.
- (1) Non-Contact Voltage Detector
- (2) 1.5V AAA Batteries
- (1) User Manual
Vertical Cable 078-2149 RJ45 and RJ11 Network Cable Tester
Quickly and reliable test the cable continuity of straight-through, cross-over, and reverse cables with this portable cable tester. This unit tests both RJ-45 and RJ-11 cables using flashing eight LED's, illuminating one-by-one in sequence, indicating the pinout configuration from one connector to the other. The remote unit detaches for testing wires that have already been installed.
There are three modes: OFF, ON, and S (Slow). The slow mode is an automatic testing method that increases the light sequence time so you don't miss any of the sequence. It's a simple battery-operated tool, but it's indispensable when creating your own patch cables from scratch.
USB Charger - Universal USB Wall Adapter
USB Wall Charger for Phones and Other USB Devices
Please note:This USB charger is designed for phones and other small electronics. If you are attempting to charge a tablet or eReader, please check with the manufacturer, as you may need a charger that supports higher voltage, like this Tablet Charger.
USB Charger for a Wall Outlet
A compact and lightweight wall charger for the USB interface. This device connects to the standard A USB plug, charges USB devices, and blends nicely with most wall outlets.
Standard A Receptacle.
This wall charger employs a standard A USB receptacle which is compatible with the most common and widely used standard A USB plug, found in many cables. This simply increases the likelihood of one of the many USB cables that are either lying around the house or comes with a purchased device to seamlessly be used with this charger.
Charges USB Devices.
This charger plugs into a standard wall outlet and enables a USB device to be charged. Prior to such charger, products that acquired power via a USB port were limited to computers. This could be inconvenient for a number of reasons: not enough USB ports on the computer, the computer was left in a different location, or the computer itself lacks power and/or a way to get it.
Blends With Decor. White is usually considered a flexible color, and most wall outlets come in this hue. Although this charger sticks out several inches from the wall, it's intrusion into airspace is concealed by its camouflaged appearance.
4K HDMI 2.0 Splitter with 3D, UHD-HDR Support, 60Hz - 1x2, 1x4, 1x8
Tired of upgrading all your equipment every time a new shiny object comes out? Future-proof your setup when you go with the most current HDMI specifications and take a breather. This HDMI 2.0 splitter supports Ultra High Definition 4K@60Hz resolutions, UHD-HDR, and 3D. It's HDCP 2.2 compliant and backwards compatible, so it will work just fine with your existing equipment while keeping you primed for future upgrades.
Watch on Multiple Screens
Get extended distribution when you connect this HDMI splitter to a single source and duplicate the signal on multiple separate displays. This splitter is ideal for sports bars, classrooms, medical facilities, and situations where multiple screens are in demand. The power supply is included in the package, so there is no need to supply additional power. The incredibly compact unit can be discreetly concealed and blends seamlessly with any decor.
Choose Your Ports
Whether you need an HDMI 1 to 2 splitter, 1 to 4 splitter, or 1 to 8 splitter, we have them all in 2.0. Select the number of ports you need from the drop down menu based on how many screens you want to split the signal to.
Scales Automatically to the Highest Resolution
The HDMI splitter scales automatically to the highest resolution of each connected display. This allows different resolution displays to be connected while simultaneously outputting the maximum resolution.
HDR support built into the splitter provides deeper blacks and more vivid colors where content allows. This potentially enhances viewing experience.
Ensures the video source displays correctly by setting a fixed EDID configuration through the integrated DIP switch.
Plug and Play Operation
Setting up the HDMI splitter is as easy as plugging in the HDMI source to the HDMI input on the splitter, and then plugging a HDMI cable from each HDMI output onto the separate displays. The splitter will automatically detect the resolution for each connected display and output the maximum resolution supported.
This HDMI splitter for TV comes with the FireFold 60 Day Guarantee, which means you can return it in its original condition for any reason for up to 60 days after purchase. It also has a one year warranty, so if it fails due to manufacturer defects during the first year after purchase, we will replace it to keep you going.
- 1x2 Splitter: DC5V/1A, <5W Consumption
- 1x4 Splitter: DC5V/2A, <8W Consumption
- 1x8 Splitter: DC12V/2A, <15W Consumption
- 1x2 Splitter: 3.78(L) x 2.32(W) x 0.66(H)" (96x59x16.8mm)
- 1x4 Splitter: 6.22(L) x 3.14(W) x 0.67(H)" (158x80x17mm)
- 1x8 Splitter: 10.24(L) x 3.54(W) x 0.83(H)" (260x90x21mm)
- 1x2 Splitter: 3.46oz (98g)
- 1x4 Splitter: 6.91oz (196g)
- 1x8 Splitter: 15.98oz (453g)
On Sale from $37.28
Vanco Certified Premium High Speed HDMI Cable with Ethernet - HDMI 2.0, 4K
Vanco Certified Premium High Speed HDMI Cable with Ethernet
Regardless of whether you're a serious gamer or casual movie-watcher, Vanco's Premium HDMI cable will ensure that you can enjoy a crisp image on your favorite HD monitor. This HDMI cable is suitable for all of the modern high-definition screens and monitors. From 720p to 4K, you'll be able to see stunning images from across the color spectrum.
Responsive High Speed Images
Since Vanco's High Speed HDMI cable has been tested and certified to function with a bandwidth of 18Gbps, this product is suitable for home theaters and expanded gaming rigs. Even if your video source is a server in the Cloud, this Premium HDMI cable will deliver smooth images that will provide you and your friends with consistently great entertainment. To accommodate hardcore home theaters, this product also supports the 21:9 video aspect ratio. This ratio is the gold standard for large screens, and it allows for viewers to clearly see the image from anywhere in the room. This high-speed HDMI cable is optimized for the most demanding HD standards of today, but it is also future-proofed for upcoming innovations in visual technologies.
While many HDMI products focus solely on delivering excellent visuals, Vanco's Premium HDMI cable is a workhorse for bringing a beautiful audio experience to your ears. This product supports up to 32 audio channels with ARC. To avoid interference to the audio and visual signals that are delivered through this product, this product has been EMI-tested. These tests concluded that this HDMI cable is resistant to interfering signals from other areas of the electromagnetic spectrum.
The Vanco Premium High Speed HDMI Cable with Ethernet is a product that will allow both casual and serious owners of home theaters to enjoy stunning HD visuals and audio. The product's impressive specifications ensure that it is a long-term investment that will serve your entertainment needs for many years to come.
On Sale from $12.00
Vanco Decor Style Brush Bulk Cable Wall Plate
This Bulk Cable Wall Plate from Vanco comes with a brush insert to help organize multiple cables. Provides a professional, finished look to your installation. Route your HDMI Cables and Audio/Video Cables for a home theater installation, or route network cables and VGA cables for a network Installation.
Vertical Cable 24 Port Blank Patch Panel with Cable Manager
The Vertical Cable 043-382/24/1U 24 Port Blank Patch Panel comes with an add-on cable manager to provide that organized, professional look. It is constructed of high impact, fire retardant, heavy gauge steel with a powder coat finish for added durability. The universal mounting style allows for either left or right hinging and easy access to the panel.
2-Way (1x2) Stereo Speaker Switch Box - Terminal Type
Distribute your audio to two separate speakers with this 1x2 speaker selector. The easy-to-use spring loaded terminals accept your speaker wire and send a single audio signal to two separate speakers. You can choose to utilize speaker one, speaker two, or both speakers simultaneously using the button selectors. This switch supports up to 200W for unparalleled audio quality.
- (1) Speaker Switch
- (2) Adhesive Padding Strips
Cat5E Patch Panel - 110 Type
Networking Made Simple
Our Cat5E Patch Panel is designed to provide amazing performance and cable management. Each Cat5E Patch Panel comes with 110-type termination while meeting and exceeding EIA/TIA TSB-40 Cat5E connecting hardware specifications.
What makes it so simple?
Besides the 110 termination that this network patch panel offers, there are 12 individual Cat5E ports on the front side. Once you get your cables terminated on the one side, you just plug and go on the other. This is a very quick and easy solution for being able to swap out devices at any time. Plus, with numbered ports, you can easily keep track of what is plugged in where for better organization.
Need to mount this up where you won’t be able to reach it so easily? These patch panels accommodate top, bottom or side cable entry. This leaves plenty of options on being able to get to your cables once you have everything set up. These IT patch panels are also able to handle wire diameters of 22AWG to 26AWG, so you should be able to easily find wires to fit.
What makes these so great?
Each patch bay is a high-density 1.75 inch by 19-inch panel. This product is 1U, with a U (unit) being the standard size for a single rack interval. While others are 2 and 3U, there will be no such waste of space here.
These network panels meet TIA/EIA-568B.2/568B.2-1 Cat.5E ISO/IEC 11801 and EN 50173-1 specifications, so they are up to the latest standards. UL certified, they have been also tested to the highest standard for safety.
From $20.92 - $92.76
Blank Keystone Jack Insert
This blank insert is used to cover up any extra holes in a keystone wall plate. It is constructed from molded plastic and is designed for snap-in installation. This insert helps block dust accumulation that would occur due to opened ports in a wall plate and hide unsightly holes.
HDMI over Cat6 Extender with IR - 164ft
HDMI Extender Over Cat6 Cable with Built-in IR (Up to 164ft at 1080p)
Limited by the distance of HDMI cables and need a cost-effective way to extend the length of your HDMI cable? FireFold's HDMI extender extends HDMI signals up to 164 feet using Cat6 cables with support up to 1080p. Built-in EDID pass-through allows display capabilities to be communicated. Constructed with a durable aluminum design with wall mountable cut outs for easy installation in any application, the HDMI extender features Full HD support and support for uncompressed audio outputs (LPCM, Dolby TrueHD, DTS Master Audio). IR control also allows you to easily control your source devices, such as Blu-ray players, television receivers, and other HDMI enabled devices.
Extending HDMI Cables through Cat6 Ethernet Cables
Designed as a solution for installations that require longer HDMI lengths, the HDMI-SINGLE-EXTEND uses Cat6 23AWG Ethernet cables to extend the length of a HDMI signal, with support for both video and audio up to 164 feet (50 meters) at 1080p (1920 x 1080) without any loss of quality.
Built-in EDID Pass-Through
The HDMI-SINGLE-EXTEND supports EDID (Extended Display Identification Data) pass-through. This allows display capabilities to be communicated, providing optimal resolution when sending content from the HDMI source to the display.
Plug and Play Operation
Setting up the HDMI extender is as easy as plugging in the HDMI source on the transmitter end and then plugging in the HDMI display on the receiver end. Plug in the included IR cables on both ends to allow the IR signal to be sent remotely, select the length of Cat6 or higher Ethernet 23AWG cable (up to 164 feet) to plug into the Ethernet port on both ends of the transmitter / receiver, and then plug in the included 5V 1A power adapters on both ends for operation.
For best performance, we recommend the use of Cat6 or higher 23AWG bare copper cables if running at the peak length of 164 feet. In practice, if you're running at distances up to 75ft, using Cat5e / Cat6 24AWG will not be an issue.
SCP 4K ULTRA HD HDMI 2.0 Cable - Custom Install (3-50ft)
SCP 4K ULTRA HD HDMI 2.0 Cable (3-50ft)
In 2016, SCP upgraded their industry popular Custom Install Series - 944E HDMI cables. These SCP HDMI cables have been tested to the latest HDMI cable performance protocols and are now guaranteed to comply with the TRUE 4K Ultra HD standard of 4K@60 4:4:4 (2160p), Full 18Gbps for all SCP 944E series HDMI cables. These cables are HIGH SPEED WITH ETHERNET compliant.
All 944E cables are UL CL-2 rated for In-Wall installation and are backward compatible with all previous HDMI versions.
NOTE: The 25-50ft lengths of this cable are directional. Please make sure you have the correct ends plugged into your source/display during installation.
From $11.04 - $95.83
Vanco Right Angle Digital Optical Audio Cable
The unique right angle styling of the connector on this digital optical audio cable from Vanco gives it a ninety degree bend radius, perfect for situations where space may be limited. You don't have to worry about putting a kink in the actual cable and damaging it, as Vanco has done the bending for you! A polished lens provides optimal signal transfer.
The black PVC jacket surrounds a slim 4 mm outer diameter. This low loss TOSLINK cable features a high quality optical fiber core for unparalleled performance. Backed by Vanco's one year manufacturer warranty, this precision engineered cable is built to last.
From $7.39 - $10.49
4K HDMI 2.0 Switch with 3D, UHD-HDR Support, 60Hz - 3x1, 4x1, 5x1
This HDMI 2.0 Switch supports the most current HDMI specifications and allows you to easily switch between multiple source devices on a single TV or display. If you're tired of upgrading your entire setup every time a new shiny object comes out, this is the best 4K HDMI 2.0 switch to future proof your media center and let you breathe easy for a while.
It supports Ultra HD 4Kx2K@60Hz video signals, as well as 3D in an easy plug and play interface. Switching is controlled with the convenient remote included with the unit or manually via the button located on the front panel. The power supply is also included in the package, so there is no need to supply additional power. The compact unit weights under a pound and blends discreetly into any decor.
Connect Multiple Sources to a Single TV
When you've got more source devices than HDMI ports, you need an HDMI switch to connect them all to your TV at once. Connect your Blu-ray player, gaming console, cable box, satellite receiver, streaming devices, and more to this HDMI 2.0 switch and you're in business! No more unplugging and plugging in cables every time you want to watch a different source. Simply choose your device from the remote, sit back, and enjoy.
Choose Your Ports
Whether you need an HDMI 3 switch or 5 switch, we have them both in 2.0. Select the number of ports you need from the drop down menu based on how many devices you want to connect to your TV.
This HDMI switcher for TV comes with the FireFold 60 Day Guarantee, which means you can return it in its original condition for any reason for up to 60 days after purchase. It also has a one year warranty, so if it fails due to manufacturer defects during the first year after purchase, we will replace it to keep you going.
On Sale from $28.19
Vertical Cable 48 Port Blank Patch Panel with Cable Manager
This 48 port blank patch panel from Vertical Cable accepts standard keystone jacks and inserts to provide custom configurations. It is constructed of heavy duty 16 gauge steel with flame retardant material and is built to last. The included cable manager snaps easily onto the back of the panel, offering integrated wire organization where desired.
- (1) 48 Port Blank Patch Panel with Cable Manager
- (48) Clear Nylon Cable Ties
- (4) Screws
Vextra 1000ft Solid CMR Cat6 Cable - 550MHz 23AWG USA Made, ETL Listed
Vextra 1000ft Solid CMR Cat6 Cable - 550MHz 23AWG USA Made
Vextra VC64B solid CMR Cat6 Ethernet cable is perfect for commercial and home networking, internet, control and monitoring circuitry and telephone lines. Solid 23AWG copper conductors and quality American-made manufacturing ensure a reliable connection every time.
Vanco SecureFit Ultra Slim HDMI High Speed Cable with Ethernet
Are you constantly replacing HDMI cables in high traffic areas? SecureFit High Speed HDMI Cables from Vanco provide a solid locking connection that is 45% stronger than standard HDMI connections. These rugged cables are built to withstand repeated tugs and pulls. They're pull tested to seven pounds, so they will stay connected, despite repeated abuse.
An added feature over standard HDMI is the thinner, more flexible gauge and smaller connector of SecureFit cables. These ultra slim cables are designed for use in tight areas, where there might be limited room and excessive bends and curves. They take up minimal space behind TVs and entertainment centers where real estate is at a premium.
These cables meet the advanced standards of today's user, supporting HD resolutions up to 1080p and 4K at 60Hz. An internal ARC streamlines receiver installations and the built-in Ethernet Channel supports IP-based applications over HDMI. They are also CL2 rated for safe in-wall installations.
From $12.12 - $23.39
Power Cord 1ft to 12ft for Display at FireFold
A Stately Connection
The common power cord is deceptively unassuming. Beneath the simple black jacket of the Computer Power Cord lies a most powerful creature. This majestic master of electricity is used to tap into precious fuel and direct it to the hungry electronic beasts that require it to function. With an NEMA 5-15 three-prong plug on one end, this mighty power cord can connect to most North American outlets designed for the hot, neutral, and ground configuration.
On the other side, the IEC-320 connector mates perfectly with many devices. The IEC-320 can be seen on the posterior plains of most desktop PC computers, but they are also frequently spotted as the power-rich ports of many televisions and monitors. The humble 18 AWG conductors of this 1.5’ three-prong cord have been observed successfully carrying up to 125V, 10A, and 1250W of AC juice.
Although they can seem like a formidable fiend, this power cord has been tested and approved by many human protection agencies such as UL, CSA, and RoHS for its safety and efficacy. The use of surge protectors is always suggested to ensure your delicate devices are guarded against the natural and unnatural fluctuations of the power grid. FireFold ensures this power cord survives far beyond the scope of many others with our definitive lifetime warranty.
On Sale from $2.35
Vertical Cable 500ft 14 Gauge In-Wall Speaker Wire - CL3 14/2, White
Vertical Cable 500ft 14 Gauge In-Wall Speaker Wire - CL3 14/2
Whether you are a seasoned professional or just trying to think like one, choosing home theater speaker wire often comes down to the classic combination of quality and quantity. Shopping at FireFold means you can find everything you are looking for all at once without a lofty price tag. There are several questions you should be able to answer while shopping for speaker wire. The gauge you need, how much you need, and where you are planning to run the cable all affect which product would best suit your installation. For larger tasks, bulk speaker wire offers the best value. We carry in-wall and outdoor bulk speaker wire in a variety of lengths and gauges.
What’s in the Box?
This 500’ box of 14 gauge wire is perfect for many projects including surround sound and intercom systems. CL3 in-wall rated, it is designed to meet the National Electrical Codes (NEC) standards for fire safety. A white PVC jacket and stranded copper design means this cable can handle the bends and twists of any indoor installation. It also means this wire is sturdy and protected enough to stand up to countless years of use. How many years? How does a lifetime sound? Every foot of speaker wire in this box comes with FireFold’s Signature Lifetime Warranty.
This 14 AWG two-conductor wire is ideal for runs to single speakers or receivers. The polarized wires are color coded in red and black plastic sheaths to make identifying the positives and negatives easy no matter how long the distance. 99.99% oxygen-free copper conductors carry crystal clear sound while reducing the risk of degradation and corrosion over time. The cable jacket and box were both designed with professional usage in mind. Sequential length markings along the cable jacket take the guesswork out of measurements and the pull-through box saves you time by preventing kinks.
Vanco Slim Bulk Cable Wall Plate
Simplify your cable installation with the WP-SLIMBULK from Vanco. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The minimum clearance for this plate is 1-3/16” and it is wide enough to accommodate the head of a VGA cable. The low, flattened profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.
From $3.59 - $5.67
TP-Link TL-SF1016D 16-Port 10/100Mbps Desktop Switch
The TP-Link TL-SF1016D 16-Port 10/100Mbps Desktop Switch is ideal for small office and home office setups. All sixteen ports utilize auto MDI/MDIX, making it plug and play without regard to cable type. Green energy-efficient technology means you can save up to 80% power consumption of similar switches.
4-Way (1x4) Stereo Speaker Switch Box - Terminal Type
Stereo audio is audio that contains two channels of audio, typically left and right channels in correspondence with the human left and right ears. Switches manage connections between one or more connections at one end and one or more connections at the other end. Switches are very useful for systems where one or more devices are shared among multiple other different devices. Using these switches, you can enjoy high-fidelity and stunningly realistic audio that only superior switches can deliver.
FireFold's switches are engineered to the tightest tolerances to deliver unwavering reliability during mission critical and stress intensive applications. Every switch is designed for optimal performance, producing unparalleled data transfer speeds while preserving utmost data integrity. The four-way speaker selector switch is used to connect four pairs of stereo speaker systems. With this switch, you can easily switch from one pair of speakers to another, or simply play the desired set amount of speakers at the same time by impressing the front button controls. You can bask in unmatched audio clarity while enjoying realistic and lifelike multimedia experiences.
Vertical Cable F-81 Keystone Insert, White
This simple F Type coaxial keystone insert is engineered for superior performance and weather resistance. It is nickel plated to resist corrosion and supports up to 3GHz bandwidths. It snaps easily into keystone wall plates and couples two coax cables together for a secure connection.
Vanco RedMere HDMI Cable - High Speed with Ethernet 4K Ready CL3
The Vanco RDM HDMI Cable features Redmere technology, enabling a lighter and thinner option from standard HDMI cables. It's a quarter of the size of most HDMI cables, bendable and easier to route, so perfect for any installation.
Redmere enables active amplification, providing High-Speed data transfer and the highest resolutions up to 100 feet. This HDMI cable also supports 3D devices and devices with IP-Based Applications through the built-in Ethernet Channel. An Audio Return Channel eliminates the need for an extra audio cable with compatible devices.
Can RedMere HDMI cables be coupled with regular HDMI cables?
Yes, the two will work together with the use of a coupler or adapter, as long as you heed the directional nature of the RedMere cable and make sure the correct end is plugged into your device.
From $60.33 - $225.00
Vanco Bulk Cable Wall Plate
Simplify your cable installation with Vanco’s WPBW. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The low 1-1/4” profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.
From $3.60 - $4.68
Platinum Tools TPS100C PoE Detector
The Platinum Tools pocket-size PoE Detector detects PoE end/mid-span voltages on network cables. LED indicators instantly show “GO/NO-GO” detection on PoE networks. Plug cables directly into the builtin RJ45 jack or use the included patch card to detect voltage in wall jacks. Differentiates between end-span PoE power which is supplied from PoE switches or router and mid-span voltage from injectors. End-span detection indicate voltages are found on pairs 1/2, 3/6; mid-span detection indicates voltages found on pairs 4/5, 7/8.
Vanco Ultra Slim HDMI Cable - High Speed with Ethernet 3D Ready
The Vanco Ultra Slim cable offers the thinnest and most flexible option when it comes HDMI. This cable allows up to 4K x 2K and 1080p Video Resolution as well and enabling IP-based application overs HDMI.
Perfect for Installations
With such a flexible and tiny connector, the Vanco Ultra Slim HDMI Cable is perfect for getting up and behind the back of those mounted TV's and reaching up and around the back of any sources you have.
Comes 3D and Audio Ready
With the Vanco Ultra Slim HDMI Cable, you are all ready for that next big 3D TV or state-of-the-art home audio system with the built-in 3D Ready and Audio Return Channels.
From $12.29 - $21.99
HDMI to VGA Converter with Audio
HDMI to VGA Converter with 3.5mm Audio Support
This HDMI to VGA converter with audio is great for connecting a laptop or PC with an HDMI connection to a VGA monitor. The HDMI male connector plugs directly into the computer, while the female port accepts a VGA cable to connect to the monitor. It comes with a 3.5mm cable to carry audio to external speakers or speakers built-in to the monitor, and is powered via USB (also included).
- (1) 3.3ft USB Male to Micro USB Cable (for power)
- (1) 3.3ft 3.5mm Stereo Audio Cable
- (1) HDMI to VGA Converter
Garvin Recessed Low Voltage Cable Plate
The Garvin LVP1NP 1 Gang Recessed Low Voltage Cable Plate is a versatile cable management tool. This wall plate allows you to easily route multiple cables through a single opening for a clean, finished look to your installation. It can be mounted upright or upside down to meet your specific requirements and provide the best angle for cable routing. This cable plate includes mounting screws for added convenience.
TP-Link TL-SG1005D 5-Port Gigabit Desktop Switch
What This Product Does
The TP-Link 5-Port Gigabit desktop switch TL-SG1005D provides you an easy way to make the transition to Gigabit Ethernet. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Moreover, TL-SG1005D adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG1005D can save power consumption, making it an eco-friendly solution for your home or office network.
Featured with 5 10/100/1000Mbps ports, TL-SG1005D greatly expands your network capacity, enabling instant large files transferring. So, power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.
Go Green With Your Ethernet
You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG1005D 5-Port Gigabit Desktop Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.
Power down Idle Ports
When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1005D can automatically detect the link status of each port and reduce the power consumption of ports that are idle.
Power Budget According to Cable Length
Ideally, shorter cable would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of the length.
Easy to Use
The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.
Vanco Active High Speed HDMI 2.0 Cable with Ethernet - 4K (12-50ft)
Vanco Active High Speed HDMI 2.0 Cable with Ethernet - 4K (12-50ft)
Future-proofed and ready for today's demanding setups, these Vanco Active High Speed HDMI Cables with Ethernet ensure a crisp, clear HD signal every time. They feature a built-in active chipset with auto equalization, which ensures your HDMI signal can go the distance. They support resolutions up to Ultra HD 4K@60Hz and 4:4:4 chroma sampling.
The SecureFit connectors are pull tested up to seven pounds, providing 45 percent stronger connections than standard HDMI connectors. The built-in tabs lock into place for a solid bond.
From $39.99 - $114.99
Vanco Male to Female HDMI Cable - High Speed with Ethernet 28AWG CL3 3D Ready
The Vanco 120501 1ft Pro Digital High-Speed HDMI Male to Female Cable with Ethernet is designed to extend an existing cable when you need a little more length. It supports all High-Speed HDMI functionality, including Audio Return Channel, 3D, additional color spaces (sYCC601, RGB & YCC601) and resolutions up to Ultra HD 4Kx2K.
From $9.49 - $23.99
SCP PREMIUM CERTIFIED HDMI 2.0 CABLE - ULTRA VIOLET (3FT - 20FT)
This new SCP Ultra Violet Series cable has been ATC tested and certified to Premium High Speed HDMI® Cable with Ethernet performance standards. SCP Premium Certified cables are specially shielded to provide maximum EMI protection. SCP Premium Certified cables are the professionals choice for 4K/Ultra HD performance and reliability.
SCP Exclusive Snug Tite™ Grip
HDMI cable connections become loose for a variety of reasons. These conditions can cause a HDMI cable connection to become loose, resulting in intermittent signal problems or system failure. For the professional integrator, this creates service calls, unhappy customers, and a general waste of time and money. With SCPs Snug-Tite™ Grip, your HDMI cable remains securely connected. Other solutions such as screw locks and locking clips are bulky and take up valuable space when connecting cables to multi-port HDMI devices. SCPs Snug-Tite™ grip incorporates the latest patented grip technology that retains its 12 lbs of grip force even after many connects/disconnects. Ideal for mobile applications and permanent installations alike, the SCP Snug-Tite™ Grip keeps your HDMI cable securely connected for maximum signal integrity.
Premium Certified Anti-Counterfeiting Label
You can be assured that this SCP cable has been tested under the Premium HDMI® Cable Certification Program and is allowed to bear this special anti-counterfeiting label. This label has encrypted data in the QR Code that allows you to quickly verify the authenticity of this cable by using your smartphone with the free HDMI Premium Cable App. With your purchase of this SCP cable, you can be assured that you can enjoy the full 4K/Ultra HD experience when viewing 4K content.
From $20.28 - $42.83
HDMI Extender (Repeater) - 115ft 3D Ready HDMI Booster
Signal is as Signal Does
HDMI is a marvel of technology. Digital pulses zoom over delicate wires, bringing you audio and video in sharp clarity and contrast. Paired with the newest LED televisions, it can certainly seem as though little slices of life are being beamed across time and space, directly onto your screen. HDMI is a sprinter, though, and not well-suited to marathon runs. Depending on output strength, cable quality, and a number of other factors, you might find yourself losing signal before you get to where you’re going. Resolution is usually the first to drop, followed by the sound or image. It doesn’t matter how long your cable is- if the signal can’t make it, you’ve got one high-tech jump rope.
Run, Cables! Run!
The job of HDMI repeaters and extenders is to train or push the signal to go farther. There are several different ways to do that. One of the easiest ways is FireFold’s HDMI-EXTEND. This HDMI repeater acts just like a regular coupler with female ports for connecting the ends of two cables. The real magic is on the inside. Using only the native 5V power carried over HDMI, this small and unimposing extender can essentially double the distance you can send your signal. Instead of a mere 50 feet to play with, this coupler can regenerate your signal for 115 feet or you could daisy-chain two of them and increase your run to 165 feet. You don’t have to sacrifice any of the advanced features of HDMI, either. High-definition resolutions, HDCP compliance, and 3D playback are all left intact for the length of your run.
This basic coupler design means there’s no set-up. You just plug in your cables and you’re ready to go. There are two things to keep in mind when using the HDMI-EXTEND. The first is to make sure it is flipped the right way. There are clear labels by the HDMI ports that say either “input” or “output.” The cable coming from your Blu-ray, DVD, or other source goes into the input and the cable to your display goes into the output. The second thing is that this repeater works best with a maximum length of 60 feet from source to repeater and 45 feet from repeater to TV. Stay within those parameters and you’re sure to enjoy all of the perks of a solid HDMI signal.
Wireless HDMI Extender Kit, 165Ft (50m) 1080p
This wireless extender includes both transmitter and receiver unit, that allows it transmit and extend HDMI signal up to 50 meters long away wireless,
it has strong anti-interference ability by running at 5GHz operation frequency and supports point to point connection, the IR function allows to remote control the source device from the receiver side which makes it a great solution for meeting, conference rooms,commercial, home entertainment and multi-media education etc..
NOTE: This product is intended to be used in an open area (same room). Signal strength is not guaranteed through walls.
Premier FWF-14511 Raceway on a Roll - 3/8 Inch x 50ft, White
Cover Your Tracks
The Premier Raceway FWF-14511 Cable Cover on a Roll is your shortcut to a tidy entertainment center. This 50ft long strip is 3/8" wide and it comes in a clean, convenient pizza box-sized dispenser. Installation of this cord cover is simple and only takes a few minutes, and the unique pull box allows you to cut just the right length of Raceway. This wire cover features a flat one-piece design that makes it especially easy to manage. Once you've cut off the length of strip you need, simply fold the base to create a channel for your cords. Ridges allow the duct shape to snap easily into place. You can either fold up the Raceway before it is mounted or after. The solvent-based adhesive foam tape on the back makes for a simple peel-and-stick mounting process. This cable cover is made of strong, durable flame-retardant PVC with a UV stabilizer to keep the color pure. Raceway is only available in white, but it can be easily painted to the color of your choice.
NetStrand IR Repeater System
You can easily access Blu-ray players, satellite receivers, and other source devices hidden away in cabinets and closets using IR control. The NetStrand IR Repeater System is a universal signal extender that works with most brands of remotes. It transmits an IR signal up to 100 feet and can control up to twelve devices using the six 3.5mm TRS mini plug outputs. It comes packaged with two dual emitters, but more can be added if desired.
Installation is quick and easy using the included adhesive strips. The block can be securely affixed using two mounting screws (also included). The receiver works well in most lighting environments, including those with compact fluorescent bulbs.
Platinum Tools Cat5E EZ-RJ45 Connector
As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is necessary to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.
Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100003C is a pack of Cat5E EZ-RJ45 connectors for Cat5E installations. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.
The initial steps for adding an EZRJ45 connector onto a Cat5E Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pinout has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.
On Sale from $28.12
Platinum Tools Cat6 RJ45 EZ-RJ45 Connector - 50pk
As anyone who has ever planned their network knows, terminating Ethernet cables isn’t necessarily hard. It can be a tedious process, though, and it is critical to speed and functionality to get it correct. If you have a lot of cables to connect or if you’re a network professional, the amount of time spent on getting conductors just right can be frustrating and even wasteful. You have to measure carefully to ensure you are clipping the precise length of wire to fit snugly into your connector and often you have to assume your pins have stayed in the right order before you crimp them.
Platinum Tools, a leading designer and manufacturer of network wiring instruments, has created a patented EZ system to eliminate many of the headaches associated with those tiny connectors. Product number 100010C is a 50-pack of Cat6 EZ-RJ45 connectors. These connectors can be used with most ordinary crimpers, but the full benefits can only be experienced when used with an EZ-RJ45 crimp tool.
The initial steps for adding an EZRJ45 connector onto a Cat6 Ethernet cable is the same. You score the outer jacket and remove an inch and a half, snipping the pull thread to get it out of your way once you have enough of the conductors exposed. Untwist the pairs and line them up according to your chosen wiring diagram. Then, instead of measuring where you need to snip off the excess wire, you skip straight to inserting the cable into the connector. Thanks to the all-transparent pull-through design, you can quickly check to make sure the correct wire pin-out has been maintained by checking the wires that have come out the end of the connector and by looking into the body of the connector itself. Once everything is lined up properly, crimp the connector on. The EZ-RJ45 tool will crimp and cut away the extra wire all in one squeeze.
On Sale $31.78