Above Ground

All-Dielectric Outside Plant Loose Tube Optical Fiber Cable - Non-Armored, Singlemode

Applications:

• Outside Plant Installations
• Duct
• Aerial Lashed

This product is TAA-Compliant and can be used for Governmental projects.

Note: This product is cut to order in 500ft increments. 

ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 6
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.41
• Cable O.D. (mm): 10.5
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 15.8
• Min. Bend Radius Installation (in.): 6.2
• Min. Bend Radius Long Term (cm): 10.5
• Min. Bend Radius Long Term (in.): 4.1
• No. of Fibers: 6
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

24-F OS2 LT ALTOS BINDERLESS FAST ACCESS CABLE

This is Corning Cable Systems Altos 24 strand fiber optic cable part number 024ZU4-T4F22D20 and is designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations.

The loose tube gel-free design is fully water blocked using craft-friendly, water-swellable materials, which means cable access is simple and no clean up is required. The flexible craft-friendly buffer tubes are easy to route in closures and the SZ-stranded,loose tube design isolates fibers from installation and environmental rigors while allowing easy midspan access. The all-dielectric cable construction requires no bonding or grounding and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 24
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Unspsc Code: 26121637

ALTOS® Loose Tube, Gel-Free, All-Dielectric 144 fiber Cable

FastAccess(TM) Technology, Single-mode (OS2), max. attenuation 0.4 dB/km

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 144
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.62
• Cable O.D. (mm): 15.8
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 23.7
• Min. Bend Radius Installation (in.): 9.3
• Min. Bend Radius Long Term (cm): 15.8
• Min. Bend Radius Long Term (in.): 6.2
• No. of Fibers: 144
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OS2 SINGLE-MODE
• Cable Type: LOOSE TUBE
• Fiber Count: 96
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.48
• Cable O.D. (mm): 12.1
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 18.2
• Min. Bend Radius Installation (in.): 7.2
• Min. Bend Radius Long Term (cm): 12.1
• Min. Bend Radius Long Term (in.): 4.8
• No. of Fibers: 96
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637

ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable

Common Installations: Outdoor lashed aerial and duct; indoor when installed according to National Electrical Code (NEC) Article 770; Design and Test Criteria: ANSI/ICEA S-87-640; Free of hazardous substances according to RoHS 2002/95/EG.

Applications: Aerial, Duct

Corning ALTOS cable with FastAccess technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cab le access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle. A variety of fiber types are available including 62.5 um and 50 um, single-mode and hybrid versions, as well as fibers with Gigabit and 10 Gigabit Ethernet performance.

Attributes

• Fiber Type: OM1 62.5 MICRON MULTIMODE
• Cable Type: LOOSE TUBE
• Fiber Count: 12
• All-Dielectric: YES
• Armored: NO
• Rodent Protected: NO
• Self-Support: NO
• Cable O.D. (in.): 0.41
• Cable O.D. (mm): 10.5
• Max. Tensile Load Installation N: 2700
• Max. Tensile Load Long Term. N: 890
• Min. Bend Radius Installation (cm): 15.8
• Min. Bend Radius Installation (in.): 6.2
• Min. Bend Radius Long Term (cm): 10.5
• Min. Bend Radius Long Term (in.): 4.1
• No. of Fibers: 12
• Max. Tensile Load Installation (lb.): 600
• Max. Tensile Load Long Term. (lb.): 200
• Unspsc Code: 26121637