$75 to $100

RETYZ ProTie 32" 175lb Releasable Tie

Make it quick. Make it easy.?

The ProTie Releasable Cable Tie is the revolutionary new cable tie from RETYZ™. This design combines the high strength of nylon zip ties with a newly designed Releasable head. How easy is it to release this new cable tie? It takes only TWO fingers to squeeze and pull. That's it! That means no more cutting away zip ties. No more nicked wires and destroyed cables. No more "releasable" zip-ties that are almost impossible to use. With the Releasable cable tie from RETYZ™, you get the best of both worlds.? ?

Reduce, Reuse, Save Money!?

Regular zip ties have a single-use and then get cut/removed for disposal. That means continuously spending money on new cable ties. That's not the case with the ProTie Releasable Cable Tie from RETYZ™. This zip tie has been designed with versatility and reusability in mind and can be used and reused numerous times without losing strength or durability. That means adding or removing a cable to your well-managed cable bundles is easier than ever. Need to make some adjustments in your garden? The ProTie Cable tie has you covered.? ??

Easy to see. Safe to use.?

Don't let the simplicity of the ProTie Releasable Cable Tie fool you. RETYZ™ has packed the ProTie Cable tie with features. You'll never have to worry about missing one of these ties again! Available in high-visibility neon green, you'll be able to see these ties almost anywhere. Rough edges are a thing of the past. The?SafetyEdge?found on the ProTie Releasable Cable Tie was developed for repeated use. It features a rounded tail and smooth, beveled edges, which makes this tie easy on the hands and even easier to use. The Comfort Reflex Thumbpad, in conjunction with the Index Backplate, makes releasing effortless.

SSF™ LC MM Duplex Connector clip w/Polarity Tubes

Convert individual Cleerline™ LC connectors to duplex assemblies with our LC mm Connector Clips. Simply snap LC connectors into the clip and go! Our specialized design holds connectors securely, allowing easy connection to duplex ports. Disconnection of the assembly is also simple due to the clip’s large push bar, which simultaneously depresses both LC connector tabs.

For ease of identification, each clip features A/B connector labeling. Yellow and white polarity connection tubes are also included in each package. Place tubes on cables prior to terminating cables and installing clips.

Mid Span Slitter for ABF Cables, 1,1 - 1,6 mm

Designed with 6 precision grooves and blades, this mid span slitter is perfect for slitting the cable sheathes off Air Blown Fiber cable without damaging the fiber inside.

Super Slim Cat6 (UTP) 550 MHz Network Patch Cable, 28AWG, 10 Pack - White

Super Slim Cat6 (UTP) 550 MHz Network Patch Cable, 28AWG, 10 Pack - Blue

Caddy 3/4 Inch J-Hook

Cat6, 110-Type, Patch Panel, 24-Port, 2U, T568A/B, W/Rear Cmgt. Panels

This 24-port category 6 1U racks and cabinet mountable patch panel is ideal for small-to-medium sized installations. The 24-port version offers compact cross-connect 110-Type IDC block. The patch panel holds up to twenty-four ports for centralized cabling connections, and is useful for future modifications.

Double Decker Steel Cable Caddy, 21" Wide

The Jonard Tools CC-5442 Cable Caddy keeps cable spools organized and easily accessible. This caddy facilitates the transportation and storage of spooled fiber optic, copper, and other cables in a wide range of spool sizes, and can hold up to two 12" (30.48 cm) diameter reels simultaneously.

Replacement Blade for AST-210 CableSaber+™ (Pack of 2)

This is a two pack of replacement blades for the AST-210 CableSaber+™.

Intellinet Outdoor Gigabit High-Power PoE+ Extender Repeater

IEEE 802.3at/af Power over Ethernet (PoE+/PoE), Extends Range up to 100 m (328 ft.), Metal, IP65

Extend the range of a PoE connection — even in harsh outdoor conditions.

The Intellinet Network Solutions Outdoor Gigabit High-Power PoE+ Extender Repeater (561211) is designed to extend connection distances from a PoE source to an output device up to 100 m (328 ft.) via Cat5e or Cat6 cable. Cover even longer distances by cascading up to five extenders. The PoE+ Extender Repeater does not need an additional power supply, as it draws the power it needs from the PoE input.

Designed for Outdoor Use

With an IP65 rating and a vast operating temperature range of -40 – 75°C (-40 – 167°F), the Intellinet Network Solutions Outdoor Gigabit High-Power Power over Ethernet Extender Repeater can be deployed in harsh conditions, which sets it apart from its indoor counterpart, the Intellinet Network Solutions PoE+ Extender (560962).

Simple Installation

Simply connect the "PoE In" port with your PoE injector or PoE switch and connect the "PoE Out" with the PoE device that you wish to connect (e.g., a VoIP phone or a PoE network camera). That's it. There is nothing to configure. It simply could not be any easier.

Reduced Wiring Costs

No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Extender to the LAN switch port and use the existing Cat5 cabling to deliver DC power as well as transfer data.

Power over Ethernet 802.3at Compliant

The Intellinet Network Solutions Outdoor Gigabit High-Power PoE+ Extender Repeater supports the IEEE 802.3at protocol. It is designed to forward data at Gigabit speeds and provide up to 25 watts of input power to a connected IEEE 802.3af- or IEEE 802.3at-compliant device. The cable length on both ends can be up to 100 meters (328 ft.), bringing the total distance to 200 m (656 ft.).

Cascading Power

Daisy-chaining multiple PoE extenders increase the transmission distance even farther. Be advised that each added PoE extender draws up to 4 W of usable PD power, and additional power losses will occur as the cable length increases.

Intellinet Industrial Gigabit PoE++ Injector

One 84 W Port, IEEE 802.3bt (4PPoE) Compliant, IP30-Rated Metal Housing, DIN-Rail Mount

Hardened Industrial Ethernet Gigabit PoE++ Injector - 85 W for an IEEE 802.3bt Powered Device

The Intellinet Network Solutions Industrial Gigabit PoE++ Injector lets you connect your IEEE 802.3bt/af/at-compliant wireless access point, IP phone, network camera and more to a non-PoE LAN switch port so it can supply both a power and a network connection up to 100 meters (328 ft.) away. This 4PPoE injector has an output power rating up to 85 watts, which is enough for even very power-hungry PoE++ devices like motorized PTZ cameras, thin clients, point-of-sale systems, lighting controllers and digital signage applications.

Designed for harsh industry environments

This Power over Ethernet injector was designed to give you the network connections you need in places that are less than calm or temperate. With its rugged, IP30-rated metal housing, it operates reliably and quietly, even under extreme temperatures that range from -40 to 167°F (-40 to 75?). In combination with its DIN-rail mounting option and a safe DC power input with plenty of safety features, this injector is ideal for IoT applications in Industry 4.0 and more.

Reduced wiring costs

There's no need to run AC power lines to get your PD set up and working. Once you've quickly wired DC power to the injector through its three-pin terminal block, simply connect this Ultra PoE Injector to the LAN switch port, and use your existing Cat5/6/6a cabling to deliver power as well as transfer data at 10/100/1000 Mbps speeds up to 100 m (328 ft.).

Safe protection for your expensive network equipment

The auto-sensing technology of this PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages. Port surge protection up to 6 kV and ESD protection up to 8 kV make its safety complete.

8-Port Gigabit Ethernet PoE+ Switch

IEEE 802.3at/af Power over Ethernet (PoE+/PoE) Compliant, 60 W, Desktop

Save installation time and money with PoE

The Intellinet Network Solutions 8-Port Gigabit PoE+ Switch is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps.

Power over Ethernet 802.3at

The Intellinet Network Solutions 8-Port Gigabit PoE+ Switch supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected.

Private VLAN

The Intellinet Network Solutions 8-Port Gigabit PoE+ Switch features port isolation, also referred to as "Private VLAN". It isolates all ports from each other and only allows access to the uplink port. This is useful, for example, if a private VLAN is a hotel where each room or apartment has a network port for Internet access. All ports can all access the Internet, but they cannot access each other. The setup is easy: Activate the VLAN switch on the front panel of the switch, and the VLAN is enabled. That is secure port isolation with the flip of a switch!

Green Ethernet Technology

More often than not, a network switch does not utilize all its ports at all times. Normally, when a computer, notebook, network printer or other network device is powered down, the switch continues to consume the same amount of power as if it were active. Now, thanks to the new energy-efficient IEEE 802.3az technology, the Intellinet Network Solutions 8-Port Gigabit PoE+ Switch detects link status to all connected devices and reduces the power usage of ports not in use. In addition, the Intellinet Network Solutions switch can adjust the level of power output based on the length of the network cable connected to a particular port. With the Intellinet Network Solutions 8-Port Gigabit PoE+ Switch you will enjoy maximum network performance, but when things slow down it automatically scales back power usage to conserve energy and save money.

* Total PoE budget for this switch is 60 watts. Per-port average power distribution is 7.5 watts; maximum per-port power usage cannot exceed 30 watts.

Enable-IT Gigabit PoE Lightning Surge Protector Kit

The Enable-IT™ 265LP Gigabit PoE Lightning Protection Kit is a set of compact weather resistant units that provides cost-effective solution for protecting PoE and Ethernet devices from damaging electrostatic discharge and surges.

The units are fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100/1000 Base-T Ethernet networks, providing Surge Protection for Ethernet data pairs as well as the PoE DC power feed.

The internal High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are /- 15 volts on pins, 1, 2, 3 and 6 and /- 58 volts on pins 4, 5, 7 and 8. The units are compatible with both normal and inverted polarity voltage PoE equipment.

For maximum Surge Protection for Ethernet and PoE installs, this kit provides two 265LP units – one at each end of your Ethernet cable run. Most PoE capable equipment is not protected from surges on Ethernet cabling. The Enable-IT™ 265LP Gigabit Ethernet Lightning Protector Kit is compatible with 10/100/1000 Base-T devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE).

These units will save your expensive LAN or PoE IP Equipment at both ends and they do their job by taking the brunt of a lightning strike damage. They are not repairable once they perform this task and will need to be replaced. If you live in a lightning prone area it is advisable to have a spare set for each outdoor line your trying to protect so that you maintain the safety of your expensive LAN and PoE Equipment.

AC1200 Wave 2 with Mesh Technology for Unlimited Business Wi-Fi

Seamless Roaming

802.11k and 802.11v help client select access point automatically with the best signal to facilitate seamless transitions when move. This allows streaming communication like VoIP and video conferences uninterrupted.

Specially Designed Weatherproof Enclosure for Outdoor Environment

Rated as IP65 during Ingress Protection testing, a resilient weatherproof enclosure protects the access points against the harsh outdoor condition.

Excellent Hardware Designs

With special design of its antenna, appearance, power options and installation methods, EAP225-Outdoor can perfectly fit for different scenarios both indoors and outdoors.

Cloud Centralized Management - Anytime, Anywhere

Omada cloud controller software is the built-in OC200 for easy deployment and can be installed on Windows or Linux computers for large wireless networks. Cloud service connects everything together so you can monitor and control your system from anywhere at any time.

Easy Management with the Omada App

Follow configuration instructions on the free Omada app to get set up in minutes. Omada lets you configure settings, monitor the network status and manage clients, all from the convenience of a smartphone or tablet.

TP-Link 8-Port Gigabit Desktop Switch with 4-Port PoE

PoE Switches for Your Ultra Convenience

8-Port Gigabit Desktop Switch with 4-Port PoE

Power over Ethernet

4 of the 5 Auto-Negotiation RJ45 ports (Port 1 to Port 4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).

Intelligent Power Management

When total power consumption excels 55W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation.

Sturdy Metal Casing

Sturdy, compact metal casing and shielded RJ45 ports, with desktop, to meet your needs in any environment. Besides, fanless design ensures quiet operation

40G QSFP+ to 4 x 10G SFP+ Passive DAC Breakout Cable

One QSFP+ to Four SFP+, Cisco Compatible, MSA- and IBTA-compliant for Maximum Compatibility, Direct Attach Copper, AWG 30, Black

SFP+ 10G Passive DAC Twinax Cable

SFP+ to SFP+, MSA-compliant for Maximum Compatibility, Direct Attach Copper, AWG 30, Black

The benefits of Passive Direct Attach Copper (DAC) cable over fiber optic and RJ45 cables

The Direct Attach Copper (DAC) cable is becoming increasingly popular in the network industry. Our passive SFP+ 10G DAC Twinax cable is an energy-efficient, low-latency and cost-effective alternative to fiber optic and RJ45 cabling. It's an excellent choice for short-distance structured cabling between switches and routers on one end and servers or storage on the other, be it in Top of Rack (ToR), adjacent rack, stacking of 10GbE switches or similar applications.

Close to zero power consumption and a wide temperature range

SFP+ DAC is comprised of a twinax copper cable terminated with SFP+ connectors on both ends, which can provide an electrical connection directly into active equipment. Consuming less than 0.15 W due to its thermal design, this passive cable helps decrease your operating expenses. Its zero-heat production during operation makes it more versatile and usable in wider temperature ranges up to 70°C (158°F), which is particularly valuable in data centers.

Lower cost and simpler to deploy than fiber optics

DAC cabling has a relatively simple internal structure with fewer components than fiber cables. This cable structure helps lower the purchase price for applications in high-bandwidth data transmission and saves you from having to buy separate transceivers. This, in turn, makes DAC cables a lot simpler to deploy since there are fewer parts to match to complete setup. Used versions of this cable are also more convenient to keep on hand because you do not have to clean and inspect them before plugging them in again. When you make upgrades or replacements to your network, the cable's seamless Hot Swapping capability makes quick work of connecting new equipment (note that passive DAC cables are not suitable for long-range applications; at 7 m (23 ft.), they reach their transmission limit).

Lower latency than RJ45 twisted-pair patch cables

Like "regular" Cat6a and Cat7 copper cables, this Direct Attach Copper twinax cable supports data transfer rates up 10 Gbps, but its unique structure and signal transmission offers lower latency.

Please note: This SFP+ 10G Passive DAC Twinax Cable is MSA-compliant and therefore designed, programmed and tested to work with compatible switches and routers from Cisco, Intellinet Network Solutions, ZyXEL, TP-Link, Ubiquiti, D-Link, Edimax, Allnet, Allied Telesis, Digitus, KTI Networks, LevelOne, PLANET, Tenda, TRENDnet, ZTE, Avaya, Mikrotik, Enterasys, Finisar, Dell Force10, Riverstone, Fortinet and more.

100G QSFP28 to 4 x 25G SFP28 Passive DAC Breakout Cable

One QSFP28 to Four SFP28, Cisco Compatible, MSA- and IBTA-compliant for Maximum Compatibility, Direct Attach Copper, AWG 30, Black

QSFP28 to Four SFP28 DAC Cable, Cisco Compatible - Break out 100G into four 25G connections

This high-quality breakout cable from Intellinet Network Solutions splits a single QSFP28 100 Gigabit Ethernet port into four individual SFP28 25 Gigabit Ethernet connections, making it ideal for linking a 100G switch uplink to multiple 25G servers, storage devices, or switches. It is MSA-compliant for seamless integration with leading manufacturers such as Cisco, Intellinet Network Solutions, ZyXEL, TP-Link, and Ubiquiti, and equivalent to the Cisco DAC Cable Cisco QSFP-4SFP25G-CU1M. IBTA compliance ensures reliable performance in both Ethernet and InfiniBand environments, while support for QDR InfiniBand, SAS, and Fibre Channel Protocol (FCP) makes it a flexible solution for networking and storage applications.

The benefits of Passive Direct Attach Copper (DAC) over fiber optic and RJ45

Our passive QSFP28 to SFP28 DAC twinax breakout cable is an energy-efficient, low-latency, and cost-effective alternative to fiber optic and RJ45 cabling. It is an excellent choice for short-distance structured cabling between switches, routers, servers, or storage, whether in Top of Rack (ToR) setups, adjacent racks, switch stacking, or similar deployments.

Close to zero power consumption and a wide temperature range

Consuming less than 0.15 W, this passive DAC helps reduce operating expenses and produces zero heat in use. Its robust design supports operating temperatures up to 70 °C (158 °F), making it suitable for demanding data center environments.

Lower cost and simpler deployment than fiber optics

With fewer internal components than fiber optic cables, DAC breakout cables are more affordable and do not require separate transceivers, reducing both cost and complexity. Hot-swappable connectors allow for quick, seamless network upgrades or replacements without downtime, and unlike fiber, used DAC cables do not require cleaning before reuse.

Lower latency than RJ45

This DAC supports data transfer rates of up to 25Gbps per SFP+ channel, for an aggregated total of 100 Gbps. Compared to RJ45 twisted-pair cabling, its design provides lower signal latency, which is crucial for high-performance networking.

Built for durability and compatibility

Featuring durable zinc die-cast SFP28 and QSFP28 connectors with pull-to-release latches, this cable offers secure connections and easy removal. It is fully TAA-compliant and designed for broad interoperability with a wide range of networking equipment.

Please note: This breakout DAC cable is MSA-compliant and programmed to work with compatible switches and routers from Cisco, Intellinet Network Solutions, ZyXEL, TP-Link, Ubiquiti, D-Link, Edimax, Allnet, Allied Telesis, Digitus, KTI Networks, LevelOne, PLANET, Tenda, TRENDnet, ZTE, Avaya, Mikrotik, Enterasys, Finisar, Dell Force10, Riverstone, Fortinet, and more.

ST-158053 – Kit of 12 x coax remote units (#1 – #12)

MPO Adapter, polarity A

Keystone Jack 110 Termination Tool

Keystone Jack Termination Tool that punch & cut all 8 conductors. Compatible with all Simply45 110 Style Keystones – 1EA/BLISTER

The Simply45® Speed Jack Termination Tool is designed to punch/cut all 8 conductors in one fluid motion. Our front load design provides better visuals and reduces strain on the keystone jack during the termination process. The ergonomic design with a locking handle greatly reduces hand fatigue. Our High-grade, hardened steel frame offers superior performance and durability.

Universal RJ45 Crimp Tool for Standard Shielded w/External Ground, No Secondary Strain Relief

Simply45 Crimp Tools are designed to streamline the process of terminating RJ45 connectors while maintaining the quality and reliability of the terminations. The S45-C250 crimps contact pins only and has no latch driver. This tool is designed to crimp standard series (solid body) shielded connectors with external ground tabs. Our dual ratcheting handles delivers more force for a better pin set onto the wire conductors and provides a smoother, faster, and easier crimping process. The reinforced steel wrapped head ensures tool stability during the crimping cycle. S45-C250 Crimp Tool is a good choice for network installers, technicians, and DIY enthusiasts who want a tool that simplifies the termination process without compromising on the quality of their network connections.

Simply45® is the industry-leading brand for RJ45 modular plug innovation and performance solutions. Our Universal Crimp Tool for Shielded External Ground Standard WE/SS (8P8C) RJ45 Modular Plugs – S45-C250. This is the recommended crimp tool for all Shielded with External Ground Standard RJ45 Modular Plugs. The S45-C250 is a breakthrough in professional RJ45 termination. The S45-250 is excellent for crimping Standard shielded external ground RJ45 modular plugs for 10G Shielded LAN cables.

Note: Unshielded and Internal Ground Shielded RJ45 modular plugs require a different crimp tool. For Pass-Through Unshielded and Pass-Through Internal Ground RJ45 modular plugs, please use our part S45-C100 crimp tool. For Standard WE/SS 8P8C Unshielded and Internal Ground Shielded RJ45 modular plugs, please use our S45-C200 RJ45 Crimp Tool.

Cat5e UTP 90° Black Keystone 110 Style RJ45 Jack, 8P8C, 50µ Gold Plated Contacts, IDC Cap, connector dust cover UL Listed. ANSI/TIA 1096-A, ANSI/TIA 568.2-D, ISO/IEC 11801 Class D, PoE: IEEE 802.3bt Type 1. w/6-Color Snap-On ID Bars Included. 25/Pack

24 Port Loaded UTP Cat6 Patch Panel, 1RU, 110 style, Cable Management Bracket, Cable Ties and Rack Screws

Simply45® Rack Mount RJ45 110-Style Patch Panels easily mount to standard TIA 19inch racks. 

Our patch panels feature rear IDC 110-Punchdown Modules. IDC compatible for 110 and Krone tools.

Panels are universal fit with heavy-duty steel construction, scratch-resistant powder-coat finish; 110 terminals Color  Coded T568A/T568B Wiring Labels.

SSF™ SM Duplex Connector clip w/Polarity Tubes

Convert individual Cleerline™ LC connectors to duplex assemblies with our LC/UPC sm Connector Clips. Simply snap LC connectors into the clip and go! Our specialized design holds connectors securely, allowing easy connection to duplex ports. Disconnection of the assembly is also simple due to the clip’s large push bar, which simultaneously depresses both LC connector tabs.

For ease of identification, each clip features A/B connector labeling. Yellow and white polarity connection tubes are also included in each package. Place tubes on cables prior to terminating cables and installing clips.

Cleerline Armored Cable Slitting Tool

The Cleerline Armored Cable Slitting Tool allows quick preparation of armored cables, including aluminum interlocking armor (AIA) and direct burial armor (armored corrugated steel).

The slitting tool cuts both the outer jacket and internal armoring in a single operation, thereby exposing the internal cables and conductors. It's an essential tool for both fiber optic and non-fiber optic armored cables and assemblies.

The slitting tool is compatible with armored cables from 0.315 to 1.125 inches (8 to 28.6mm) in diameter, and a built-in rotatable blade pivots up to 90 degrees allowing both longitudinal ("slit") and circumferential ("ring") slitting.

25G SFP28 SR Transceiver MM, 100m

Cleerline™ SSF-SFP28-25GSR is a high-performance 25G SFP28 SR Optical Transceiver designed for short-range multimode fiber (MMF) communication, supporting distances of up to 70 meters over OM3 and 100 meters over OM4. This single-rate module is compliant with IEEE 802.3by 25GBASE-SR optical specifications and features a dual-directional design with a duplex LC optical connection. It is backward compatible with legacy 10G SFP+ modules, providing flexibility for various network upgrades. The module operates with a single +3.3V power supply and supports a control management interface via a 2-wire serial interface, which facilitates serial ID, digital diagnostics, and module control functions.

The SSF-SFP28-25GSR transceiver is equipped with a 25G 850nm VCSEL transmitter and a 25G PIN photo-detector, ensuring reliable data transmission and reception. It features an all-metal housing for superior EMI performance and operates within a temperature range of 0 to 70°C. The module supports digital diagnostic monitoring compliant with SFF-8472 and has a maximum power consumption of 1.0W. It is ideal for high-speed storage area networks, computer cluster cross-connects, custom high-speed data pipes, and inter-rack connections, providing robust and efficient solutions for modern data communication needs.

SSF Refillable Cassette Cleaner for 1.25mm and 2.5mm Ferrule Connectors

Refillable cassette cleaner for 1.25mm and 2.5mm ferrule connectors including SC, FC, ST, MU, LC, MT, MPO/MTP with guide pins.

Large Fiber Duct Cutter with Extra Long Handles

Designed to cut large fiber ducts up to 64 mm (2.52”) in diameter, this fiber duct cutter is perfect for cutting PVC, CPVC, PE, HDPE, PEX and other nonmetallic tubing.

Replacement Blade Block Set for CSP-D6

This product is the replacement blade block set for the CSP-D6 Cable Slitting Pliers for DAC cable, 6 mm.

Replacement Blade Block Set for CSP-D5

This product is the replacement blade block set for the CSP-D5 Cable Slitting Pliers for DAC cable, 5 mm.

Dual Cable Roller for Cables up to 1" Diameter (Pack of 4)

Designed to work with two cables up to 1" diameter each. The CR-210/4 is simple and easy to use for pulling cable in overlash construction.

Super Slim Cat6 (UTP) 550 MHz Network Patch Cable, 28AWG, 10 Pack - Black

Caddy Wire Basket Tray Clip, 3/16"-5/16" Wire

Caddy Metal Pressure Clip, 16 Cable, 0.28" Hole

4K60 Elite USB-C® Travel Adapter

4K HDMI™ / Gigabit Ethernet / 140W Power Delivery 3.1 / USB™ 10Gbps

Windows® / macOS® / Chrome OS™ CompatibleUL EPR Test Report Passed

This compact multi-port adapter is ideal for travel, featuring everything from the essential HDMI™ output, USB™ ports to Gigabit Ethernet and 140W Power Delivery passthrough. It gives you the ability to connect your Chromebook™ , MacBook®, or other USB-C® compatible laptops to a 4K monitor or TV with 60 Hz refresh rate and audio. With USB™ Power Delivery 3.1, you can charge your laptop and power your peripherals with a single USB-C® power adapter even if your laptop only has one USB-C® port. In addition, you can connect or charge your USB™ devices via the SuperSpeed USB™ 10Gbps ports and access a wired network through the Gigabit Ethernet port.

Through a single USB-C® (Thunderbolt™ 3, 4, and USB4® compatible) host cable, this compact adapter provides all the essential connectivity you need to create a workstation virtually anywhere!

System Requirements:

• Available USB-C® port that supports DisplayPort™ alternate mode and USB™ Power Delivery 2.0/3.0 or 3.1
  Please refer to the manufacturer of your computer for more information about your device
• The host device must support DisplayPort™ 1.4 to achieve 4K resolution at 60 Hz. DisplayPort™ 1.4 devices are listed as follows (your device may be compatible even if not listed, please check with your computer manufacturer for compatibility):
  • M1 and M2 MacBook® computers
  • Surface™ Pro 9, 8
  • Surface™ Laptop Studio
  • HP® Pavilion (2021)
  • ThinkPad X1 Carbon Gen 10
  • Dell® Inspiron 14 Plus 7420
  • Dell® Inspirion 16 Plus 7620
  • Acer® Swift 3 (2022)
  • Acer® Spire 5 (2022)
  • Laptops equipped with Thunderbolt™ 4 ports
  • Laptops equipped with USB4® ports
  • Laptops equipped with USB-C® that support DisplayPort™ 1.4

Special Notes:

• A 4K-capable display is required for obtaining the 3840 x 2160 resolution
• If connected to a USB™ 2.0 host port, or if using a USB™ 2.0 host cable, performance may be limited
• The adapter can connect to a USB-C® port that doesn’t support Power Delivery, but it will not pass power through the connected device
• If you are using high-powered USB™ devices, attach a USB-C® power adapter to the power delivery port to ensure maximum performance. To avoid disruption, do not remove the power adapter while copying files.
• We advise no more than one (1) bus-powered/portable external hard disk drive to be connected to the adapter at a time

Telephone Splice Connector Kit

Designed for stripping, splicing, and crimping telephone connectors, the TK-U3 Telephone Splice Connector Kit is the ideal compact tool kit for telephone installers and technicians.

Accessory Kit for ROD-3316 Coated Fiberglass Rodder

This is the replacement accessory kit for the ROD-3316 Rodder containing flexible leaders with a pulling eye, ball tip, and more.

Replacement Blade for RCS-50 Submariner Cable & Large Duct Slitter

This product is the replacement blade for the RCS-50 Submariner Cable & Large Duct Slitter.

Replacement Blade for RCS-30

This product is the replacement blade for the RCS-30 Ratcheting Duct and Cable Slitter. This blade is made of steel for high durability and long life. It penetrates duct walls up to 5 mm thick, allowing you to make mid span window cuts in cables and ducts.

Mid Span Shaving Tool (1.0 mm-3.3 mm)

The MS-600 Mid Span Shaving Tool is designed to provide easy access to optical fibers in outer jackets and loose buffer tubes. With 6 precision grooves to handle various cable sizes, the sleek ergonomic design allows you to open a fiber jacket or buffer tube without damaging the fiber inside.

Mid Span Slitter (1.2 mm-3.3 mm)

The patented and award-winning MS-6 Mid Span Slit Tool is designed to provide easy access to optical fibers in outer jackets and loose buffer tubes. With 6 precision grooves to handle various cable sizes, the sleek ergonomic design allows you to open a fiber jacket or buffer tube without damaging the fiber inside.

Replacement Blade Set for MS-426

This is the replacement blade set for the MS-426 Fiber Optic Mid Span Slit & Ring Tool. This replacement blade set is for cable diameters from 5.8 mm to 12 mm. The blades are made for long term use and last for up to 5,000 slits/cuts.

Mid Span Slitter (2.9 mm-6.8 mm)

The patented and award-winning MS-26 Mid Span Slit Tool is designed to provide easy access to optical fibers in outer jackets and loose buffer tubes. With 5 precision grooves to handle various cable sizes, the sleek ergonomic design allows you to open a fiber jacket or buffer tube without damaging the fiber inside.

Fiber Jacket Slit & Ring Tool

Designed to slit and ring many types of buffer tubes, breakout cables, and other types of jacketed cables, this fiber jacket slit, and ring tool is perfect for slitting OFS Minicord EZ-Bend and other similar cables.

Cable Slit & Ring Tool

Designed to slit and ring many types of tight buffers, loose tube buffers, breakout cables, and other types of jacketed fiber cables, this tool is perfect for any fiber technician.

Impact Insertion Tool for 3M MS2 Cross-Connect Modules

This impact insertion tool is designed to terminate wires on 3M MS2 cross-connect panels quickly and easily.

Modular Plug, 8P8C, CAT6A, STP, Ruggedized, Field-Terminatable - 10 Pack

J-Hook with Beam Clamp 25 Pack - 1 5/16"

ICC’s J-Hook with Beam Clamp is a reliable solution designed to support category cables, fiber optic cable, innerduct systems, and other low voltage cabling requirements. The J-Hooks, with a reinforced body capable of withstanding substantial payloads, are constructed from high-quality galvanized steel, ensuring strength and durability. They accommodate a variety of cables, including CAT 5e, CAT6, CAT6A, coax, fiber optic cables, and conduit. The rust-resistant zinc finish adds to their longevity, and the design complies with EIA/TIA requirements for structured cabling systems. Offering a cost-efficient alternative to expensive cable trays or ladder rack runways, these J-Hooks feature smooth edges to protect cables and facilitate a proper bend radius. Cables can be pulled through quickly and easily, and the anchor points are designed to be secured with cable ties. Available in bulk packs of 25, these J-Hooks provide a practical and scalable solution for cable management needs.