$50 to $75

Simplex Rugged Drop Cable, SC/APC-SC/APC, OS2, 4.8 mm Riser I/O

Cleerline™ SRGDSCSC-APC Simplex Rugged SSF™ drop cable is composed of a SSF™ tight buffered fiber in an overall 4.8 mm Rugged jacket, is Riser rated indoor/ outdoor, and incorporates aramid water blocking yarns for strength and protection. SSF™ fiber adds extreme strength and durability at the glass level having up to 10,000x more bend and 2x to 3x times the tensile strength over traditional fibers.

Simplex Rugged SSF™ is ideal for installation both indoors and outdoors being designed for staple attachment, can be placed in ducts or indoors in riser spaces and tray installations.

Cleerline drop cables utilize Senko™ SC APC Premium grade 4.8mm connectors for reliable fiber mating with unparalleled durability.

Cleerline Fiber Pigtail, 900 µm, 50 µm OS2

Cleerline™ fiber optic pigtail assemblies are designed for performance and reliability. These 900 μm tight buffered assemblies come with a connector pre-terminated on one end and a pigtail fiber on the other. These “bare” ends can be stripped and fusion spliced or terminated to a single or multi-fiber trunk. These pigtails allow for minimal return loss and low attenuation and combine high precision zirconia ferrules providing optical performance for today’s network applications. Pre-terminated pigtails are available in multiple connector and glass types covering today’s most common applications. Plugging the connectors directly into an adapter panel allows for quick patching and splicing for your project.

Fiber Pigtail, 900 µm, 50 µm OM3

The Cleerline PT-LC06-MM pigtail features a 900 µm tight-buffered fiber with 6 OM3 multimode strands. Each strand is pre-terminated with an LC connector, providing a reliable connection for high-speed data networks. These pigtails allow for minimal return loss, low attenuation and high precision zirconia ferrules providing optical performance for today’s network applications.

10G SFP+ Transceiver SM, 20Km

Cleerline™ SSF-SFP-SM10G is a high-performance 10G SFP+ transceiver designed for long-range data transmission over single-mode fibers. Operating at a wavelength of 1310nm, this transceiver supports distances up to 20 kilometers, making it ideal for applications requiring extended reach. The SSF-SFP-SM10G is compliant with the 10GBASE-LR standard and features a line rate of 10.3125Gbps, ensuring reliable and efficient data communication.

This SFP+ transceiver utilizes a 1310nm DFB transmitter and PIN photodetector, providing low power consumption and superior EMI performance with its all-metal housing. It is hot-pluggable, allowing for easy installation and maintenance. The module supports advanced digital diagnostics, enabling real-time monitoring of received optical power, laser bias current, and optical output power. The electrical interface is compliant with SFI specifications, ensuring compatibility with a wide range of networking equipment.

The SSF-SFP-SM10G is ideal for various applications, including 10GBASE-LR at 10.3125Gbps and 10GBASE-LW at 9.953Gbps. It is suitable for long-range data communication in enterprise networks, data centers, and high-speed storage area networks (SANs). The transceiver's robust design and compliance with industry standards make it a cost-effective solution for enhancing network infrastructure and supporting high-density port configurations.

Outdoor Fiber Optic Plastic Enclosure, Empty (Holds 12 SC Simplex or 12 LC Duplex Adapters)

The SSF-OTB12 Outdoor Plastic Enclosure is designed for larger-scale outdoor fiber termination needs, accommodating up to 12 feed-thru adapters. Constructed from durable PC + ABS material, ensuring waterproof and dust-proof protection rated up to IP65. 

This enclosure features secure closure, comprehensive cable management with internal winding areas, and hinged internal distribution panels for two levels of management. Its dimensions are 8.89 in (22.6 cm) H x 8.38 in (21.3 cm) W x 2.63 in (6.7 cm) D, making it suitable for extensive outdoor fiber installations. 

Feed-Thru adapters are not included

Visual Fault Locator for SC / 2.5mm

The Cleerline 2.5mm Visual Fault Locator includes a 650nm visual fault locator (VFL) for the verification of cables and connectors using visible light. The VFL features a 2.5mm ferrule for direct compatibility with SC, ST and FC connectors. An optional adapter can be used to adapt to 1.25mm LC connectors.

VFLs are essential for tracing fiber cable paths, checking optical continuity and verifying proper connector termination. They detect fiber breaks, fiber leaks, stress points and faulty connectors.

Transparent SSF MM 50/125, 900µm, Terminated SCSC

SSF™ CLEERFIBER cable provides fiber optic speed and reliability in one clear strand of cable. 

Offering the same strength, safety, and speed of termination as the entire line of SSF™ fiber optic solutions, providing signal distribution without penetrating walls and greatly increasing the design possibilities for interior systems. 

This cable is a single strand of SSF™ 50/125 multimode fiber contained within a 900µm transparent jacket. The cable can be routed and placed inconspicuously along baseboards or ceilings, up walls, or directed anywhere for easy indoor point-to-point cable placement. The cable can be caulked and painted over, becoming virtually invisible. 

Terminated with SC connectors at each end. 

Transparent SSF MM 50/125, 900µm, Terminated LCLC

SSF™ CLEERFIBER cable provides fiber optic speed and reliability in one clear strand of cable. 

Offering the same strength, safety, and speed of termination as the entire line of SSF™ fiber optic solutions, providing signal distribution without penetrating walls and greatly increasing the design possibilities for interior systems. 

This cable is a single strand of SSF™ 50/125 multimode fiber contained within a 900µm transparent jacket. The cable can be routed and placed inconspicuously along baseboards or ceilings, up walls, or directed anywhere for easy indoor point-to-point cable placement. The cable can be caulked and painted over, becoming virtually invisible. 

Terminated with LC connectors at each end. 

1G SFP Transceiver RJ45, 100m

The SSF-SFP-UMRJ451G is a high-performance, cost-effective Copper Small Form-Factor Pluggable (SFP) transceiver designed for Gigabit Ethernet applications. Fully compliant with IEEE 802.3-2002 and IEEE 802.3ab (1000BASE-T) standards, this module enables seamless 1000 Mbps full-duplex data transmission over distances of up to 100 meters.

1.25G SFP Transceiver SM BiDi T:1550/R:1310nm, 20Km Max Reach, w/DDM

Bi-directional (BiDi) SFP transceivers are high performance, cost effective modules supporting dual data-rates of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF. These SFPs use Wavelength Division (WDM) technology, mixing two wavelengths simultaneously. 

This SFP module accepts 1 LC connector and must be used as a pair: SSF-SFP-SM1GBDA matched with SSF-SFP-SM1GBDB. 

The SSF-SFP-SM1GBDA consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a transimpedance preamplifier (TIA) and MCU control unit. 

The SSF-SFP-SM1GBDB transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. 

The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA. 

SSF™ Mechanical Splice Outdoor Cover - 10 Pack

Simplify mechanical splicing with Cleerline SSF™ Mechanical Splice Supplies. Designed for easy implementation, the Mechanical Splice securely connects single-mode or multimode fibers.

Splice Protectors are designed for use with 250 μm, 900 μm, 2.0 mm or 3.0 mm outer diameter cables.

SSF™ Mechanical Splice Protector Round Type - 10 Pack

Simplify mechanical splicing with Cleerline SSF™ Mechanical Splice Supplies. Designed for easy implementation, the Mechanical Splice securely connects single-mode or multimode fibers.

Splice Protectors are designed for use with 250 μm, 900 μm, 2.0 mm or 3.0 mm outer diameter cables.

Industrial Power Supply 60W, AC 85-240V input, DC 48V Output 1.25A, DIN Rail Mountable

The Cleerline™ SSF-DIN-48V60W-PS Industrial Power Supply is a power solution designed for demanding industrial environments. With an AC input range of 100-240V and providing a stable 48V DC output at 60W, this power supply is suitable for a variety of applications. It features a fully isolated plastic case for safety, standard protections against short circuit, over load, and over voltage, and an LED indicator for power status. The device operates efficiently with a low no-load power consumption of less than 0.9W and includes a DC OK signal output for monitoring.

This power supply is designed for easy installation on TS35 DIN rail systems and comes with 3.5 inches of steel DIN rail and mounting screws for versatile wall mounting. The SSF-DIN-48V60W-PS operates within a wide temperature range of -20 to +70°C and humidity levels from 20 to 90% non-condensing, making it ideal for harsh industrial conditions. With an output current of up to 1.25A and high efficiency over 85%, this power supply ensures reliable and consistent performance, enhancing your industrial power management setup.

Adapter Plate, 24 Fiber, Quad, LC/APC, 9 µm OS2, Green

Cleerline™ 24 port LC/APC single-mode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.

Adapter Plate, 24 Fiber, Quad, LC/UPC, 9 µm OS2, Blue

Cleerline™ 24 port LC single-mode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.

Adapter Plate, 24 Fiber, Quad, LC/UPC, 50 µm OM3-4, Aqua

Cleerline™ 24 port LC multimode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.