$25 to $50

Arlington TVB2GW Recessed Wall Box

Arlington's non-metallic recessed indoor InBox allows items such as furniture or televisions to be placed closer to the wall. Arlington's InBox uses mounting wings to attach to the wall, so it is ideal for new or retrofit construction. This two gang 34.0 cubic inch InBox comes in white, is cULus listed, and has a two-hour fire rating. It comes with the recessed box, trim plate, wall plates, low voltage divider, and mounting/installation screws.

Vanco Dual HDMI Pigtail Wall Plate

The standard HDMI wall plate with pigtail is a white decor style rectangular covering for a wall. It has dual HDMI cables. Each cable has 2 HDMI ports at either end. The port contacts are gold plated to resist corrosion and degradation. With a screw at the top and another at the bottom, this wall plate is installed the standard way.

This wall plate will help you organize and extend your HDMI devices. Running cables through the wall is one of the most common ways installers create their gorgeous and functional setups. There is one problem with most wall plates, however, and that is the angle of their HDMI port on the back. A pass-thru port will cause wear and tear to the connector of your HDMI cable if not angled in a way to reduce stress, the pigtail will remove this concern. With a flexible pigtail, you can angle your cable in a way that best serves your needs. Just like other HDMI wall plates, crystal clear, high-resolution signals are supported and audio and video is transmitted.

Vanco HDMI Pigtail 3.5mm Wall Plate

Behind the Curtain

Order is your personal pledge. Cleanliness, discipline, and organization are the foundation of your life. Your shirts are arranged by color and season, your pantry displays every label facing out, and you have long since alphabetized your Blu-ray collection. You are the envy of your less responsible brethren. If only they knew your cluttered little secret. Behind your impeccably polished television, your precisely calibrated speakers, and your immaculately stacked components lurks a threat to the very fabric of your meticulous existence. The cables once acquired to bring you joy and peace have turned on you. Years have transformed them into a twisted, jumbled tangle of disgrace. You must fix it before it’s too late!

Organize Chaos

Restore cable lawfulness with the WP-HDMI-3.5MM wall plate featuring an HDMI and a 3.5mm jack. The standard one-gang size and easy plug-in ports make running wires through your wall simple and attractive. This plate allows you to use the shortest mess-free cable lengths from your devices to the wall, making them easier to manage and hide. With gold-plated connectors and support for the latest high-definition resolutions, compatibility is of no concern. The lead-free HDMI pigtail is extremely flexible to help prevent any positional strain on the small pin connectors and it comes to you completely 3D-ready for seamless integration. The 3.5mm port can be used either for headphone-style stereo audio or for an IR extension connection.

Installing and connecting the WP-HDMI-3.5MM is straightforward and quick. This design offers multiple fitting options as well. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future. For basic installations, a drywall saw and a screwdriver are the only tools you will need. These plates do not require much clearance, so they are ideal for hiding behind equipment and televisions or anywhere else where space is an issue.

Sleek Socket Ultra-Thin Electrical Outlet Cover with 6 Outlet Power Strip

The sleek socket is an innovative and affordable product that allows you to completely hide unsightly, unsafe and inconvenient outlets via a unique ultra-thin design that's about the thickness of a pencil on top of an outlet. It drastically reduces, and in some cases completely eliminates, obstructions between furniture and traditional plugs attached to an outlet.

This surge protector is great for hiding plugs behind TV stands, wall mounts, home office desks, home theaters and gaming stations. The 6-foot extension cord with convenient 6 outlets allows protection for multiple devices and has 90 joules, 4500 Amps.

What sized outlets is the “Standard” model compatible with and what sized outlets is the “Oversize” model compatible with?

The Standard model for every sleek socket model is compatible with:

• A “standard” outlet cover measuring 2 3/4 inches wide x 4 1/2 inches long

(The majority of outlet covers in a US home are “standard” size)

The Universal Oversize model for every sleek socket model is compatible with all of the following:

• A “standard” outlet cover measuring 2 3/4 inches wide x 4 1/2 inches long
• A “mid-size” outlet cover measuring 3 1/8 inches wide x 4 7/8 inches long
• An “oversize” outlet cover measuring 3 3/8 inches wide x 5 1/16 inches long

(The Oversize model is recommended if you are unsure of the outlet cover sizes in your home or just don’t feel like measuring your outlet covers, as this model is designed to fit all outlet covers sizes currently on the market).

Safety Certifications: UL Std. 817 (U.S.) and CSA Standard C22.2 No. 21 (Canada). Intertek certification number: 5011560

Single Gang, Flush Style, Faceplate, Without Id Windows, 25-Pack

 The 1/2/3/4/6 port 25-pack single-gang flush style faceplates are configured to fit a standard single-gang outlet box. These are packaged in 25 pieces per pack. They are ideal for projects and packaged with environmentally friendly packaging by reducing waste and cost-savings solutions.

Classic Faceplate with 3 Port for EZ®/HD Style in Single Gang 25 Pack

ICC offers faceplates, also known as wall plates, in a classic style. ICC’s faceplates are configured to fit a standard single gang outlet box. They come with three port which can be configured with modular connectors for voice, data, audio, video and fiber optic connectivity. ICC offers a wide selection of colored modular connectors to help identify the port to the workstation. Also, the housing of the connectors mounts flush with the front faceplate. This makes the outlet appear as one complete piece and aesthetically pleasing. These faceplates are made with tough ABS plastic for long-lasting use and comply with UL 94 plastics flammability standard.

Vanco USBWP5V Dual USB In-Wall Charger with AC

Tired of hunting down a USB charger every time your phone needs a boost? Hunt no more. This power outlet from Vanco features a regular tamper-resistant AC outlet, along with two USB ports for charging mobile devices. It's compatible with both Android and iOS devices, so no one gets left out. Plug your USB cable right into the outlet and you're charging!

This charger is designed to work with standard single gang trim plates. The USB outlets emit 2.4A of power, which is perfect for most phones, but tablets might require a little more juice. In that case, you'll want to use the USB charger that came with your device and connect it to the standard AC outlet. Installation does require some wiring, so you may want to consult an electrician for safety and effectiveness.

Slim HDMI Pigtail Component Wall Plate

Behind the Curtain

Order is your personal pledge. Cleanliness, discipline, and organization are the foundation of your life. Your shirts are arranged by color and season, your pantry displays every label facing out, and you have long since alphabetized your Blu-ray collection. You are the envy of your less responsible brethren. If only they knew your cluttered little secret. Behind your impeccably polished television, your precisely calibrated speakers, and your immaculately stacked components lurks a threat to the very fabric of your meticulous existence. The cables once acquired to bring you joy and peace have turned on you. Years have transformed them into a twisted, jumbled tangle of disgrace. You must fix it before it’s too late!

Organize Chaos

Restore cable lawfulness with the WP-HDMI-COMP, a décor-style wall plate featuring HDMI and RGB red, green, and blue component jacks. The standard one-gang size and easy plug-in ports make running wires through your wall simple and attractive. This plate allows you to use the shortest mess-free cable lengths from your devices to the wall, making them easier to manage and hide. With gold-plated connectors and support for the latest high-definition resolutions, compatibility is of no concern. The lead-free HDMI pigtail is extremely flexible to help prevent any positional strain on the small pin connectors and it comes to you completely 3D-ready for seamless integration.

Installing and connecting the WP-HDMI-COMP is straightforward and quick. This design offers multiple fitting options as well. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor faceplate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

Single-Gang, Flush Style, Faceplate, With Id Windows, 25-Pack

The 1/2/3/4/6 port 25-pack single-gang flush style faceplates with window labels are configured to fit a standard single-gang outlet box. These are packaged in 25 pieces per pack. They are ideal for projects and packaged with environmentally friendly packaging by reducing waste and cost-savings solutions.

Vanco SVGA Wall Plate with 3.5mm

Maintain a professional look to your install while keeping the cable clutter at bay with this VGA Wall Plate with 3.5mm Audio from Vanco. The sleek stainless steel finish matches any decor while providing an easy connection for your VGA and 3.5mm cables.

It installs in seconds. Just attach it to any single gang box or low voltage bracket with the included color-matching screws and you're done! No extra wiring is required, as the connections act as couplers between two cables. Just plug and play!

Quest Wall Plate With Dual USB Charging

Quest offers sleek duplex and decor wall plates with USB charging. They are easy to install, simply remove the existing wall plate and replace it with the USB wall plate using the same screw. The USB wall plate will make electrical connections with the outlet automatically. No wiring is required!

Vanco VGA and 3.5mm Wall Plate

Keep a professional look with this VGA and 3.5mm decor style wall plate. It is engineered for optimal signal transfer and minimal signal loss, with gold-plated contacts for maximum conductivity.

Vanco 2 Port Slim Line VGA to VGA Wall Plate

Keep a professional look with this two port VGA decor style wall plate. It is engineered for optimal signal transfer and minimal signal loss, with gold plated contacts for maximum conductivity.

DataComm Recessed Media Box w/ Duplex Receptacle

The Recessed Media Box II is designed to streamline power and cable management behind your HDTV. The box features a side cover plate with knockouts for conduit or tube. This is the ideal solution for allowing your TV or other display to be mounted flush to the wall. This box is available in surge and 20 commercial-grade models.

DataComm Décor Duplex 4.0 Amp USB Charger

The Décor Duplex 4.0A USB Charger is designed to quickly and easily replace existing outlets allowing you to charge multiple devices at once without sacrificing power outlets. Simply connect the USB end of your device’s charging cable into either of the USB ports, then connect the charging end of the cable to your smartphone, tablet, or other device.

Wall Box Template & Level for Non-Metallic Boxes, 3-Gang and 4-Gang

Designed specifically for cutting out 3 and 4-gang non-metallic old work boxes, this wall template level is perfect for ensuring the boxes are level every time.

Vanco WP-4P-BIND Binding Post Wall Plate 

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

Vanco’s WP-4P-BIND binding post wall plate helps you banish the mess by providing an easy, attractive interface for running your wires through the wall. Binding posts, like spring clips, are one style of connecting speaker wire to a device, source, or jack. They use a red and a black color to identify the positive and negative terminals. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The gold-plated connectors help pass along seamless, quality sound.

Each speaker requires one red and one black connection, so this wall plate is compatible with four speakers. Installing and connecting the WP-4P-BIND is straightforward and quick. The wall plate can attach directly to a single gang box or low voltage bracket, but the décor insert can also be removed and swapped into a larger or pre-existing décor face plate. This gives you nearly endless possibilities for customization and opens the door for hassle-free expansion or upgrades in the future.

• (1) Vanco 28148W 4 Pair Binding Post Decor Wall Plate
• (2) Color Matching Screws

7.1 Home Theater Wall Plate with HDMI

Down to the Wire

The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

Connect the Dots

FireFold’s 7.1 Home Theater Wall Plate with HDMI and Subwoofer is an all-in-one solution for banishing the mess of wires by running them through the wall. This wall plate is based on the décor style of design which means the three insert panels are fully removable and can be used with other décor face plates. As it comes, this wall plate is compatible with three-gang junction boxes and low voltage brackets. Although labeled for an easy home theater set-up, this wall plate can be used for whole house audio as well. With seven pairs of red and black binding post connections, one RCA subwoofer jack, and a single high-speed HDMI connection, this wall plate is thorough and flexible.

Binding posts are one style of connecting speaker wire to a device, source, or jack. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The black and red posts are marked on both the back and the front, which makes matching positive and negatives confusion-free. Please note this wall plate is not 3D or Ethernet ready.

DataComm 45-0031-WH Bulk Cable Plate

DataComm Electronics' new, patented Recessed Low Voltage Media Plates offer the convenience of a duplex receptacle and a recessed plate with enough room to store the low voltage cables behind your flat panel TV.

Sleek Socket Ultra-Thin Child Proofing Electrical Socket Cover

The sleek socket is an innovative and affordable product that allows you to completely hide unsightly, unsafe and inconvenient outlets via a unique ultra-thin design that's about the thickness of a pencil on top of an outlet. It drastically reduces, and in some cases completely eliminates, obstructions between furniture and traditional plugs attached to an outlet.

The elegant design of the sleek socket enhances home décor and provides unmatched aesthetics around the outlet by eliminating ugly plugs and cords that clash with the color of the wall around the outlet. And for white walls, the sleek socket blends into the wall and you may forget it’s even there!

How does it work?

Simply attach the sleek socket to the top receptacle of a duplex outlet – no tools or screws are required!

How does the childproofing version of the sleek socket provide enhanced protection for children and pets?

The sleek socket childproofing model is designed to make it difficult for children to gain access to electrical outlets by completely hiding the underlying outlet. The high strength adhesive (16) 5-inch cord clips and (4) 4-inch cord clips cover 96 inches of cord which helps protect children and pets from accessing and chewing electrical cords.

What sized outlets is the “Standard” model compatible with and what sized outlets is the “Oversize” model compatible with?

The Standard model for every sleek socket model is compatible with:

• A “standard” outlet cover measuring 2 3/4 inches wide x 4 1/2 inches long

(The majority of outlet covers in a US home are “standard” size)

The Universal Oversize model for every sleek socket model is compatible with all of the following:

• A “standard” outlet cover measuring 2 3/4 inches wide x 4 1/2 inches long
• A “mid-size” outlet cover measuring 3 1/8 inches wide x 4 7/8 inches long
• An “oversize” outlet cover measuring 3 3/8 inches wide x 5 1/16 inches long

(The Oversize model is recommended if you are unsure of the outlet cover sizes in your home or just don’t feel like measuring your outlet covers, as this model is designed to fit all outlet covers sizes currently on the market).

Safety Certifications: UL Std. 817 (U.S.) and CSA Standard C22.2 No. 21 (Canada). Intertek certification number: 5011560

PowerBridge ONE-PRO-6 Cable Management

Few people know that most local building codes prohibit the in-wall use of ordinary appliance power and extension cords. But that doesn’t mean you have to add “Hire an Electrician” to your to-do list! With the PowerBridge ONE-PRO-6-WH, you can make hiding wires a real one-man job. This wire management kit allows you to create a clean and professional look without fiddling with electrical lines or compromising your safety. It comes with two wall plates: one “in” that draws power from your existing electrical outlet and one “out” that sends that power to your TV.

This kit includes two wall plates, two back boxes, one 6’ length of in-wall Romex, and one 6’ external male to female power cord. Step-by-step instructions and a color-coded wiring template make this an easy project for even the first-time do-it-yourselfer. It can be installed horizontally or vertically onto any one-gang bracket or box. These plates also include a brush-style low voltage cable pass-through, eliminating the need for an additional cut-in for your wires. Recessed into the wall, the ONE-PRO-6-WH is ideal for use behind low profile television mounts or in any location where space is tight.

Warning: This product does not have built-in surge protection or A/C filtering. We recommend connecting it to a quality surge protector or power conditioner for maximum equipment protection. Do not use this product near water.

DataComm Remote Device Mount, 62-5440

DataComm Electronics’ Remote Device Mount is used to mount HVAC and security sensors. Complete your project with a clean installation when the sensor is flush to the dry wall.

This is the simplest way to install a sensor. With this product there is no need to fish out wires from behind drywall, so say goodbye to fishing for wires from behind drywall!

The Remote Device Mount also comes with five different sensor inserts that will fit most brands of all sensor types: security, temperature and HVAC sensors to name a few.