Shop
Networking
Bulk Wire & Cable
Cables
Racks & Enclosures
Tools
Audio/Video/Home
HDMI
Mounts
Security
Adapters
Usb/Mobile/Tablet
Electrical
Technical Furniture
Shop Brands
FireFold
ICC
Intellinet Network Solutions
Jonard Tools
j5create
Kendall Howard
Netstrand
Paige Electric
Platinum Tools
Quest
Rhino Brackets
SimplyBrands
Structured Cable Products
Vanco
Vertical Cable
Wavenet
World Cord Sets
View All
About Us
Customer Service
Returns
Order Status
Shipping Policy
Customer Reviews
Contact Us
70497971000
Support@FireFold.com
Free Shipping on Orders > $99.99 - *Some Exclusions May Apply
Filter
5% offat checkout
Jonard Tools Duct Reforming Tool, 3.5 mm - 16 mm
Designed to reform microducts after cutting them, this duct reforming tool is perfect for reshaping the geometry of microducts to prevent blowout stops when connecting them.
$26.95
Intellinet LED Ethernet Port Detector Tool
For RJ45 Keystone Jacks and Patch Panels with LEDs, Locates and Analyzes Port Connections, Yellow
Use this tool to effortlessly analyze RJ45 port connections in real time. You can check their trace status for an active connection (port LED lights red), a correctly cabled connection (port LED lights green), and a failure in cable termination (port LED is off). This works with select keystone jacks (#791267 & 791274) and patch panels (#721080) with built-in LEDs from Intellinet Network Solutions. For the best overall solution, we recommend using all these three components in conjunction.
Three distinctive modes give you flexibility at the touch of a button. Make the connected port LED light up, flash, or stay continuously illuminated, adapting to your specific information needs with ease.
NOTE: Requires one 9-volt battery (not included)
$26.99
Jonard Tools Replacement Blades for RST-8514 & WST-225 Shaving Tools (Pack of 25)
This product is a replacement blade set for the RST-8514 Riser Slitting Tool and the WST-225 Window Shaving Tool. This replacement blade set includes (25) replacement blades. The blades are made of SK5 steel for high durability and long life.
$49.95
Jonard Tools Replacement Blade Set for MS-6 (Pack of 2)
This is the replacement blade set for the MS-6 Fiber Optic Mid Span Slitting Tool and comes with (2) blade cartridges. This replacement blade set is for cable diameters from 1.2 mm to 3.3 mm. The blades are made for long term use and last for up to 5,000 slits/cuts.
$33.95
Jonard Tools Thin-walled Microduct Scoring Tool, 5–16 mm
The Jonard Tools Microduct Scoring Tool is perfect for scoring and ringing 10/8 and 12/10 fiber optic microducts without damaging the fibers inside.
$35.95
Jonard Tools Replacement Blade for CST-28
This product is the replacement blade for the CST-28 Cable Stripper, 6 to 25 mm.
$28.95
Select Options
RETYZ ProTie 32 Inch 175lb Releasable Tie
The ProTie Releasable Cable Tie is the revolutionary new cable tie from RETYZ™. This design combines the high strength of nylon zip ties with a newly designed Releasable head. How easy is it to release this new cable tie? It takes only TWO fingers to squeeze and pull. That's it! That means no more cutting away zip ties. No more nicked wires and destroyed cables. No more "releasable" zip-ties that are almost impossible to use. With the Releasable cable tie from RETYZ™, you get the best of both worlds.? ?
Regular zip ties have a single-use and then get cut/removed for disposal. That means continuously spending money on new cable ties. That's not the case with the ProTie Releasable Cable Tie from RETYZ™. This zip tie has been designed with versatility and reusability in mind and can be used and reused numerous times without losing strength or durability. That means adding or removing a cable to your well-managed cable bundles is easier than ever. Need to make some adjustments in your garden? The ProTie Cable tie has you covered.? ??
Don't let the simplicity of the ProTie Releasable Cable Tie fool you. RETYZ™ has packed the ProTie Cable tie with features. You'll never have to worry about missing one of these ties again! Available in high-visibility neon green, you'll be able to see these ties almost anywhere. Rough edges are a thing of the past. The?SafetyEdge?found on the ProTie Releasable Cable Tie was developed for repeated use. It features a rounded tail and smooth, beveled edges, which makes this tie easy on the hands and even easier to use. The Comfort Reflex Thumbpad, in conjunction with the Index Backplate, makes releasing effortless.
From $29.32 - $91.37
SCP LC Duplex Multimode Fiber LGX Adapter Plate - 10G OM3/OM4 Multimode Adapters (Aqua)
The 6 multimode duplex LC enclosure panel populates open panel slots in compatible wall-mount enclosures and rack trays. The panel is compatible with LGX-118 panel slots and features push-pin style mounting tabs for quick installation.
From $43.63 - $120.63
GigaTech 1000BASE-SX SFP MMF E-Temp DOM Cisco Compatible
The GigaTech Products GLC-SX-MMD-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP optical transceiver is based on the Gigabit Ethernet IEEE 802.3 standard and is designed to be compliant with SFF-8472 SFP Multi-source Agreement (MSA). This module is designed for multimode fiber and operates at a nominal wavelength of 850nm.
Applications:
$29.00
TP-Link ARCHER T2U NANO AC600 Nano Wireless USB Adapter
The Archer T2U Nano receives WiFi signals on two separate bands. 256QAM technology increases the 2.4 GHz data rate from 150 Mbps to 200 Mbps for 33% faster performance. 433 Mbps on 5 GHz is perfect for HD video streaming and lag-free online gaming, while 200 Mbps on 2.4 GHz is perfect for web surfing with legacy devices.
With its miniature size and sleek design, users can insert the nano adapter into any USB port and leave it in there, making it perfect for home or travel use.
Some public WiFi networks require you to go through the hassle of constantly selecting and connecting to different networks as you move around. Connect automatically to the nearest WiFi network with the Archer T2U Nano’s WiFi Roaming for an uninterrupted network no matter where you go.
A friendly user interface for simple installation.
WPA/WPA2 encryption standards ensure your wireless connection is safe from intruders.
Supports operating systems including Windows, Mac OS.
$25.73
DINSpace LC/SC Singlemode (9/125) Duplex Fiber Patch Cable
From $25.15 - $28.98
DINSpace ST/SC Multimode (62.5/125) Duplex Fiber Patch Cable
From $18.50 - $25.23
10% offat checkout
Techlogix Networx TL-1GSFP-SM20K 1GBASE-LX/LH SFP 1310nm 20km DOM Transceiver -- Single Mode Fiber
TechLogix SFP transceiver modules adapt TechLogix fiber technology to different cable formats.
The TL-1GSFP-SM20K transmits 1G signals up to 20 km (12.4 miles) over duplex single-mode fiber.
$47.41
Free Shipping
ICC ICPCSTFF05 5ft 25-Pair Cable Assembly, Female to Female 50-Pin
This 25-pair cable assembly from ICC is designed for use with patch panels, punch down boxes, distribution boxes, and 66 and 110 wiring blocks. It has two 50-pin female RJ21 connectors, both with 90 degree angles to alleviate cable stress in areas of limited space. This telecom cable is constructed with 24 AWG unshielded twisted pair Category 3 cable.
The ICPCSTFF05 Telco cable comes with both the FireFold 60 Day Money Back Guarantee and Signature Lifetime Warranty. This means you can return it in its original condition for any reason within 60 days of purchase for a full refund, and if at any point during the lifetime of the cable, it fails due to manufacturer defects, we will replace it to keep you going.
$31.21
Simply45 PROSeries 7.3mm Strain Relief with Locking Pin for all Simpy45® UTP Cat6/Cat6A RJ45, Red Tint - 100pcs/bag
PROSeries 7.3mm Strain Relief with Locking Pin for all Simpy45® UTP Cat6/Cat6A RJ45, Red Tint – 100pcs/bag
$32.95
Cleerline TKITP-500 Reference Testing Cables
Cleerline™ Reference Cables are designed to deliver precision and reliability for all your fiber optic testing needs. These reference cables ensure accurate and consistent measurements, essential for maintaining high-performance network standards.
1ea Simplex LCLC, SCSC and LCSC Multimode and 1ea LCLC, SCSC and LCSC Single-mode 1m reference cables.
$40.06
Cleerline Fiber Pigtail, 900 µm, 50 µm OM3
The Cleerline PT-LC06-MM pigtail features a 900 µm tight-buffered fiber with 6 OM3 multimode strands. Each strand is pre-terminated with an LC connector, providing a reliable connection for high-speed data networks. These pigtails allow for minimal return loss, low attenuation and high precision zirconia ferrules providing optical performance for today’s network applications.
From $15.38 - $67.81
Cleerline Adapter Plate, 06 Fiber, Simplex, SC/UPC, 9 µm OS2, Blue
Cleerline™ 6 port SC single-mode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.
$25.36
Cleerline Adapter Plate, 12 Fiber, Duplex, LC/UPC, 9 µm OS2, Blue
Cleerline™ 12 port LC single-mode adapter plate has a simple push-in design. These adapter plates fit any LGX compatible Rack Mount and Wall Mount enclosures, making it easy to add additional ports as needed.
$36.76
Jonard Tools Flat Drop Toner Wire Slitter, Mini LT Flat Drop Cables
Designed to slit messenger wire and webbing off 3 mm x 1.2 mm flat drop fiber cables, this messenger wire slitter precisely separates the messenger wire from 3 mm x 1.2 mm flat drop cables to make cable preparation quick and easy.
$36.95
Vanco Super Slim Cat6 (UTP) 550 MHz Network Patch Cable, 28AWG, 10 Pack - White
Super Slim Cat6 (UTP) 550 MHz Network Patch Cable, 28AWG, 10 Pack - White
From $33.99 - $91.99
Vanco Super Slim Cat6 (UTP) 550 MHz Network Patch Cable, 28AWG, 10 Pack - Blue
Super Slim Cat6 (UTP) 550 MHz Network Patch Cable, 28AWG, 10 Pack - Blue
Caddy 4 Inch Double J-Hook W/Bc200 Beam Clamp, Swivel
From $29.51 - $277.21
Intellinet Cat6 Punch-Down Keystone Jack with LED, Transparent, 25-Pack
LED Link Indicator, UTP, for Solid Wire, Gold-plated Contacts
The Cat6 Punch-Down Keystone Jack with LED from Intellinet Network Solutions is designed for deployment in blank patch panels, wall plates or surface connection boxes. Its built-in LED provides real-time feedback on the trace status, streamlining troubleshooting and minimizing downtime (Intellinet LED Port Detector Tool #780179 required). This keystone jack is suitable for solid conductor cables in high-performance network applications up to 1000BASE-T and PoE applications up to IEEE802.3bt / PoE++ / 4PPoE / Ultra PoE. It is equipped with gold-plated contacts for high signal integrity.
Note: This product requires the LED Port Detector Tool from Intellinet Network Solutions (#780179)
$45.99
Jonard Tools CAT5e RJ45 Pass-Through Connectors (Pack of 50)
The Jonard Tools CAT5e RJ45 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT5e network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector.
Intended for use with Jonard's RJ11 and RJ45 connector crimping tool: UC-4569
Jonard Tools 15 ft Glow Rod Kit+, 3/16" Diameter
Designed to facilitate telecom and datacom installations, these glow rods are perfect for pushing and pulling cables in low light applications.
$46.95
Jonard Tools Flush Cut Kevlar® Cutters
The Jonard Tools JIC-190 Flush Cut Kevlar® Cutters are designed to cut Kevlar®, cabling insulation, tape, cable ties, and other materials flush to the surface.
$30.95
Jonard Tools Ergonomic Fiber Optic Stripper, 250 micron
The Jonard Tools JIC-175 Ergonomic Fiber Optic Stripper is made with preset factory settings and no adjustments required. This fiber optic stripper is designed to strip 250μm buffer coating to expose the 125μm optical fiber in fiber optic cables.
Jonard Tools Hardline Jacket Stripping Tool .625"
The HS-625 hardline stripping tool is designed to strip 5/8" diameter T10625 Times Fiber T10 COAX cable, Commscope P3, and other similar .625" cables.
$38.95
Jonard Tools Hardline Jacket Stripper 1/2"
The HS-50 hardline stripping tool is designed to strip 1/2" diameter T10500 Times Fiber T10 COAX cable, Commscope P3, and other similar .500" cables.
Jonard Tools Replacement Blades for FOD-2000 (Pack of 25)
This product is a pack of 25 reversible replacement blades for the FOD-2000 Fiber Optic Drop Cable Slitter.
Jonard Tools Fiber Drop Cable Stripper, 2.0 mm x 3.1 mm
Designed to strip FTTH drop cables sized 2.0 mm by 3.1 mm, this drop cable stripper strips the outer jacket of drop cables and cuts the strength members to expose the fiber inside.
Jonard Tools Punchdown Tool with 110/66 Combo Blade
Designed to terminate and trim wires in 66- and 110-style cross connect blocks and 110-style wall jack modules, this punchdown tool is perfect for any telecom or data communications installer.
$43.95
Jonard Tools Punchdown Tool without Blade
Designed for use with our EPB-series blades or other similar brands, this punchdown tool is perfect for any telecom or data communications installer.
$34.95
Jonard Tools Replacement Blade for CST-1140 Round Cable Stripper
This product is the replacement blade for the CST-1140 Round Cable Strip and Ring Tool.
Jonard Tools Telescoping Pole, 5 ft (11 ft Total Reach)
Designed to extend a full 5 feet (1.52 meters) while providing exceptional control and accuracy, this telescoping pole is perfect for holding the CF-200 camera or installing and retrieving cables in drop ceilings or other hard to reach places.
Intellinet Gigabit High-Power PoE+ Injector, 561518
1 x 30 W Port, IEEE 802.3at/af Compliant, Plastic Housing
The Intellinet Network Solutions Gigabit High-Power PoE+ Injector lets you connect your IEEE 802.3af/at-compliant product to a non-PoE LAN switch port. The Power over Ethernet Injector can power and supply a network connection to a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered PD. This injector has an output power rating up to 30 watts. That's enough for even power-hungry PoE devices.
There's no need to run AC power lines to get your PD set up and ready to do what it's supposed to. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.
Once DC power is connected to your networked equipment through the Cat5e/6 cabling, the Intellinet Network Solutions PoE Injector ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages.
$29.99
Intellinet Power over Ethernet (PoE+) Splitter, 560443
IEEE802.3at, 5, 7.5, 9 or 12 V DC output voltage
The Intellinet Network Solutions PoE+ Splitter allows you to deliver both data and electrical power to non-PoE Ethernet-enabled products using the Cat5 Ethernet cable. Using the PoE Splitter, you can take advantage of Power over Ethernet and place Ethernet-enabled products, such as Network Cameras and Wireless Access Points*, where power outlets are not readily available.
Having to manage only an Ethernet cable simplifies the physical installation of the device. Without having to worry about the availability of a power source, you can mount Ethernet-enabled products on a ceiling or outdoors, up to 100m (328 feet)** from a power source. The PoE Splitter is simple to install and requires no tools or software.
The PoE Splitter can be used to complement any PoE injector unit or midspan switch to provide small to medium-sized businesses a complete end-to-end PoE solution. This unit supports 802.3af and 802.3at, ensuring compatibility with other 802.3af/t PoE-compliant injector units or PSE switches.
During the setup, the PoE Splitter can be set to power any compatible 5 V, 7.5 V, 9 V or 12 V Ethernet-enabled device via the volt selector located on the side.
** Maximum distance per 802.3u specifications.
$26.59
Sale
RETYZ WorkTie 14 Inch 120lb Releasable Tie, Plenum Rated
The Easy Release Cable Tie is the revolutionary new cable tie from RETYZ. This *patented* design combines the high strength of nylon zip ties with a newly designed Easy Release head. How easy is it to release this new cable tie? It takes only TWO fingers to squeeze and pull. That's it! That means no more cutting away zip ties. No more nicked wires and destroyed cables. No more "releasable" zip-ties that are almost impossible to use. With the Easy Release cable tie from RETYZ, you get the best of both worlds.
Regular zip ties have a single-use and then get cut/removed for disposal. That means continuously spending money on new cable ties. That's not the case with the Releasable Cable Tie from RETYZ. This zip tie has been designed with versatility and reusability in mind and can be used and reused numerous times without losing strength or durability. That means adding or removing a cable to your well-managed cable bundles is easier than ever. Need to make some adjustments in your garden? The RTZ Cable Tie has you covered.
Don't let the simplicity of the Releasable Cable Tie fool you. RETYZ has packed this tie with features. You'll never have to worry about missing one of these ties again! Available in high-visibility neon green, you'll be able to see these ties almost anywhere. Rough edges are a thing of the past. The?SafetyEdge?found on the Easy Release cable tie was developed for repeated use. It features a rounded tail and smooth, beveled edges, making this tie easy on the hands and even easier to use. The Comfort Reflex Thumbpad, in conjunction with the Stable+ Backplate, makes releasing effortless.
On Sale from $14.92
Vertical Cable Optical Fiber Rack-Mount Panel, LGX, Three-Position, Front and Rear CMB, 1U
$31.30
SCP-EasyFiber™ Visual Fault Locator Adapter for LC connectors - 2.5mm to 1.25mm
The SCP EasyFiber Visual Fault Locator Adapter for LC Connectors adapts a visual fault locator's standard 2.5mm connection to a 1.25mm connection, making it compatible with LC-style connectors. The adapter is universally designed for 2.5mm connections and is an essential accessory for any fiber optic installer.
$33.81
Tenda Gigabit High PoE Injector POE30G-AT
The Tenda PoE30G-AT is the IEEE802.3 AT Gigabit PoE injector, which fully conforms to the standard of wtih 802.3, transmitting power through Ethernet cable, the maximum transmission distance can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet device IEEE802.3af/ compatible PoE power applications such as wireless AP, VoIP phone and web CAM. The power supply of Ethernet cable not only provides system reliability, traditional power grid expansion, but also simplifies the deployment of power lines.
PoE ports supports IEEE802.3at and IEEE802.3af standard Supports AT high power(30W)
The standard cat’s power distance can be extended to 100 meters. The device can extend the range of PoE power over long distances, and simplify the deployment of power lines so that PD equipment can supply power.
10/100M/1000Mbps autosensing RJ45 port provides fast data delivery, supports wire speed forwarding and MDI/MDIX, plug and play.
Adopts new chips solution, brings new performance experience, powerful data transfer and power
$30.77
Enable-IT 24V Outdoor Gigabit Inline PoE Reducer
The EnableIT™ 324 Gigabit PoE Reducer 24V DC Inline Solution is a specialized converter that transforms any high power DC voltage signal down to a 24V DC or optional 12V PoE signal with Gigabit Ethernet LAN data.
This PoE Reducer is essential for installing sensitive low voltage PoE devices like PoE IP cameras, IP Phones or PoE WiFi Access points. Compatible with all 802.3af, 802.3at or PoE switches or standalone injectors including reverse polarity.
This Gigabit Power over Ethernet (PoE) Reducer is a unique one of a kind and world’s first solution that is able to take your hot PoE and PoE Plus power/data at extreme distance and safely deliver 24VDC or 12VDC PoE input for your expensive PoE Equipment.
The overvoltage issue is typically created by PoE injectors and PoE Midspan devices that leverage PoE Extenders over extreme distances and are too strong in delivered output PoE voltage to be inserted into limited 12v/24V PoE devices such as Ubiquity Wireless Access Point radios. These RJ-45 PoE radios were designed for standard Ethernet distance limitation in mind and cannot handle voltage over 20VDC. The Enable-IT 324 now solves that issue with a plug and go Gigabit PoE Reducer so that you can safely leverage PoE Extender kits that support PoE and PoE like the Enable-IT 821P, 828 or 865 PRO PoE Extender Kits.
This elegant unit is ideal for installing any WiFi Wireless Access Point, Security camera or other PoE powered equipment. It eliminates the need for external power supply and its associated AC/DC power cabling, providing a compact, affordable, safe and reliable power solution over your wiring or existing Ethernet infrastructure. The 324 Gigabit PoE Reducer uses industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment a snap, plug and go simplicity or on your existing or new wiring.
The Enable-IT 324 unit is very lightweight and compact for most all applications and use. These units are easy and rapid to install with plug and play RJ-45 Ethernet jacks to quickly insert your wiring and go. As a 802.3af and 802.3at compliant device, the Enable-IT 324 – 24VDC Power over Ethernet Reducer uses 4 wires in a category rated wiring bundle, i.e. CAT5e run. As will all PoE voltage drops over distance. As a rule of thumb you will lose 6V per every 100′- 200′ of wiring, depending on the gauge. Lower power also means more amperage means more heat and perhaps issues with the 24 gauge wires in CAT5. You may need to use 18 gauge wiring.
$36.00
j5create JCE133G USB Type-C to Gigabit Ethernet Adapter
j5create’s JCE133G is a simple, one-piece external adapter that plugs into the USB-C™ port on your Ultrabook™ or MacBook®. The JCE133G is the ultimate solution if you do not have an Ethernet port or if you just want to increase your speed. The elegantly designed JCE133G uses an RJ-45 connector that supports 10/100/1000 Mbps Ethernet performance. The JCE133G allows you to add networking capabilities to a computer without them through a Wi-Fi connection.
TP-Link ARCHER T3U AC1300 Mini Wireless MU-MIMO USB Adapter
Wireless AC technology means Archer T3U delivers connections that are up to 3x faster than with the previous Wireless N standard. High-speed WiFi (up to 867 Mbps over the 5 GHz band and 400 Mbps over the 2.4 GHz band) means Archer T3U is able to support all your online activities, from HD video streaming to lag-free online gaming and web surfing.
Archer T3U has a smart design that is tinier than most USB adapters. Not only can it be inserted into any USB port but is also easy to carry.
Experience blazing-fast data transfers of up to 4.8 Gbps with USB 3.0 — the latest USB connectivity standard. USB 3.0 transfers data up to 10x faster than USB 2.0 and is also backwards compatible with USB 2.0. Combined with 802.11ac Wi-Fi, USB 3.0 makes Archer T3U ideal for HD streaming, online gaming and large file downloads.
With MU-MIMO technology, Archer T3U can provide two simultaneous data streams, improving the throughput and efficiency of the entire network when working with a compatible MU-MIMO router.
$36.20
TP-Link ARCHER T2U PLUS AC600 High Gain Wireless Dual Band USB Adapter
The Archer T2U Plus receives WiFi signals on two separate bands. 256QAM support increases the 2.4 GHz data rate from 150 Mbps to 200 Mbps, delivering up to 33% faster performance. 200 Mbps speeds on the 2.4 GHz band is perfect for normal use, such as web surfing with legacy devices. 433 Mbps speeds on the 5 GHz band is ideal for HD streaming and lag-free online gaming.
Archer T2U Plus has one 5dBi high-gain external antenna to ensure stronger signal transmission and reception. Enjoy a stable WiFi connection throughout your home.
Rotate and adjust the antenna in multiple directions to improve user experience and performance in different environments.
$27.93
DINSpace LC/SC Multimode (62.5/125) Duplex Fiber Patch Cable
From $26.65 - $32.90
New Product
Intellinet QSFP+ 40G Passive DAC Twinax Cable
QSFP+ to QSFP+, MSA-compliant for Maximum Compatibility, Direct Attach Copper, AWG 30, Black
The Direct Attach Copper (DAC) cable is becoming increasingly popular in the network industry. Our passive QSFP+ 40G DAC Twinax cable is an energy-efficient, low-latency and cost-effective alternative to fiber optic and RJ45 cabling. It's an excellent choice for short-distance structured cabling between switches and routers on one end and servers or storage on the other, be it in Top of Rack (ToR), adjacent rack, stacking of 40GbE switches or similar applications.
QSFP+ DAC is comprised of a twinax copper cable terminated with QSFP+ connectors on both ends, which can provide an electrical connection directly into active equipment. Consuming less than 0.15 W due to its thermal design, this passive cable helps decrease your operating expenses. Its zero-heat production during operation makes it more versatile and usable in wider temperature ranges up to 70°C (158°F), which is particularly valuable in data centers.
DAC cabling has a relatively simple internal structure with fewer components than fiber cables. This cable structure helps lower the purchase price for applications in high-bandwidth data transmission and saves you from having to buy separate transceivers. This, in turn, makes DAC cables a lot simpler to deploy since there are fewer parts to match to complete setup. Used versions of this cable are also more convenient to keep on hand because you do not have to clean and inspect them before plugging them in again. When you make upgrades or replacements to your network, the cable's seamless Hot Swapping capability makes quick work of connecting new equipment (note that passive DAC cables are not suitable for long-range applications; at 7 m (23 ft.), they reach their transmission limit).
This Direct Attach Copper twinax cable supports data transfer rates up 40 Gbps, and its unique structure and signal transmission offers lower latency.
Please note: This QSFP+ 40G Passive DAC Twinax Cable is MSA-compliant and therefore designed, programmed and tested to work with compatible switches and routers from Cisco, Intellinet Network Solutions, ZyXEL, TP-Link, Ubiquiti, D-Link, Edimax, Allnet, Allied Telesis, Digitus, KTI Networks, LevelOne, PLANET, Tenda, TRENDnet, ZTE, Avaya, Mikrotik, Enterasys, Finisar, Dell Force10, Riverstone, Fortinet and more.
From $32.99 - $43.99
×
×