$200 to $300
Enable-IT Gigabit 30W per port PoE SFP Fiber 8 Port Switch
Enable-IT Gigabit Ethernet & PoE Fiber Switch
The Enable-IT 8808F SFP Gigabit Ethernet & PoE Fiber Switch is a an all-in-one robust solution. It provides (8) 10/100/1000 Base-T RJ-45 ports with built in IEEE 802.3af/at PoE support up to 328ft / 100m allowing you to connect several IP security cameras or PoE devices. 8808F has 4 Slots to support GBIC 1000 Base-X SFP (Small Form-Factor Pluggable) modules for connecting your fiber network for high speed data computing. The perfect robust Ethernet / Fiber all-in-one solution with web management for easy configuring of VLAN, QoS, RSTP, SNMP. etc.
There is no need to worry about the damage of PoE being applied to Non-PoE Devices and PoE connected devices are supplied with up to 30W per port with 1 port up to 60W for high powered PoE Delivery.
The Enable-IT 8808F supplies PoE electrical power on industry standard 2-pair (RJ-45 pins 4/5 positive and 7/8 negative) along with Ethernet data in one single cable allowing you to expand your network where there are no power lines or outlets. This enable you to deploy PoE devices such as WiFi Access Points, PoE IP Cameras, Poe Access controls or PoE IP Phones. Gigabit PoE extension can be achieved by using any Gigabit PoE extender up to 2,000ft.
Made in the USA with quality and pride – the only manufacturer to do so in this industry.
Enable-IT 2-Port Standalone Gigabit PoE 828 Unit - requires your PoE
Enable-IT 2-Port Standalone Gigabit PoE Extender
The Enable-IT™ 828 Gigabit PoE Extender Unit is the world’s 1st and only for 4 years running copper Gigabit PoE Extender Kit solution in the industry today.
This 828 product is a standalone unit to be used with your PoE Injector or PoE Midspan. The standalone 828 can drive incremental Gigabit Ethernet to 800ft (240m). For installing PoE IP cameras, PoE Access Points and remote LAN segments – Nothing is more cost effective or simple to install. The three LAN port design allows for a laptop to be connected and quickly configure devices.
The Enable-IT 828 can drive industry standard Gigabit Ethernet signals to over six times the restricted IEEE standard Ethernet distance when combined in a series of multiple units and uses high power PoE . This cost-effective solution eliminates many of the limitations and high costs for extending LAN cabling today.
The 828 Series Solution is a standalone powered Gigabit Ethernet Repeater that doubles the range of your Gigabit Ethernet to an unpowered remote location.
This is ideal for installing high powered PoE cameras remotely using only a CAT5e or CAT6 rated 100m cabling. Selectable DIP switches allow for disabling PoE output on either output port to enable standard non PoE LAN devices such as a laptop to configure an IP camera.
You can also daisy chain (3) 828 PoE Extender Kit to reach 2,000ft (600m) to power a 56V 50W PoE device easily.