$100 to $200

LC/UPC Multimode OM3-4 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ LC multimode OM3/4 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your multimode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ LC multimode OM3/4 Connectors are compatible with all SSF™ fibers as well as standard 50/125 multimode fibers.

Visual Fault Locator with LC Adapter

The Cleerline Pocket Visual Fault Locator and Adapter includes a compact 650nm visual fault locator (VFL) for the verification of cables and connectors using visible light. A VFL adapter for compatibility with SC, ST, FC and LC connectors is included.

VFLs are essential for tracing fiber cable paths, checking optical continuity and verifying proper connector termination. They detect fiber breaks, fiber leaks, stress points and faulty connectors.

1 x SFP to 4 x RJ45 Industrial Gigabit Switch

The Cleerline™ SSF-1x4-RUGGED is a 1 x SFP to 4 x RJ45 Gigabit Ethernet switch designed for industrial applications, offering reliable performance in extreme environments. This non-managed switch supports 10/100/1000Base-TX to 1000Base-X connections and operates within a temperature range of -40 to 75°C. Its rugged IP40-rated metal casing and DIN rail bracket make it ideal for mechanically or electrically extreme environments. The switch features a store and forward switching mechanism, auto-negotiation, auto MDI/MDI-X on every RJ45 port and supports IEEE 802.1Q Tag VLAN pass-through. 

The SSF-1x4-RUGGED switch includes strong surge protection (4kV ~ 8kV) per port and is compliant with various IEC and EN standards for industrial-grade equipment. It offers redundant DC power inputs (10-60V) for enhanced reliability and features reversed power polarity protection. With dimensions of 88 x 35 x 120mm and weighing 0.38kg, it is compact and easy to install via DIN rail or wall mounting. The switch supports a back-plane switching fabric of 10 Gbps, a MAC address table of 4K, and a packet buffer size of 1MB, making it an efficient solution for reliable data transmission in industrial settings. 

External power supply required (SSF-DIN-48V15W-PS)

LC/UPC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ LC/UPC single-mode OS2 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your single-mode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ LC/UPC single-mode OS2 Connectors are compatible with all SSF™ fibers as well as standard 9/125 single-mode fibers.

HD Splice Cassette, Quad, 9 µm OS2, 1m Pigtails

Cleerline™ HD Splice Cassettes provide an efficient solution for managing spliced fibers. This cassette comes preloaded with 24 strand single-mode LC/UPC fiber pigtails, and its corresponding adapter plate.

These splice cassettes are sized to fit within any LGX compatible opening.

These cassettes have a removable transparent cover to allow easy fiber verification. All cassettes include heat shrink splice protection tubes, removeable splice organizers, and cable management accessories.

10G SFP+ Transceiver SM BiDi T:1330/R:1270nm, 20Km Max Reach

Cleerline™ Bi-directional (BiDi) 10G SFP+ transceivers are high-performance, cost-effective modules supporting 20 km transmission distance with single-mode fiber. 

This SFP module accepts 1 LC connector and must be installed as a pair: SSF-SFP-SM10GBDA matched with SSF-SFPSM10GBDB. 

These single-mode transceivers are small form factor pluggable modules for duplex optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. The SFP+ 20-pin connector allows hot plug capability. 

Modules are designed for single-mode fiber and operate at a nominal wavelength of 1270nm or 1330nm. The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. 

Transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. 

10G SFP+ Transceiver SM BiDi T:1270/R:1330nm, 20Km Max Reach

Cleerline™ Bi-directional (BiDi) 10G SFP+ transceivers are high-performance, cost-effective modules supporting 20 km transmission distance with single-mode fiber. 

This SFP module accepts 1 LC connector and must be installed as a pair: SSF-SFP-SM10GBDA matched with SSF-SFPSM10GBDB. 

These single-mode transceivers are small form factor pluggable modules for duplex optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. The SFP+ 20-pin connector allows hot plug capability. 

Modules are designed for single-mode fiber and operate at a nominal wavelength of 1270nm or 1330nm. The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. 

Transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. 

1 x SFP to 1 x SFP Gb Ethernet Fiber Optic Media Converter

The Cleerline™ SSF-SFP-SFP-CON Media Converter is a high-performance, stand-alone converter that supports data rates ranging from 155M to 2.5G. Equipped with dual SFP slots, this device accommodates a variety of SFP types, including multimode, single-mode, CWDM, DWDM, and BiDi, facilitating bi-directional transmission over a single fiber strand. It operates in full duplex mode and is compatible with multiple standards such as IEEE 802.3, 802.3u, 802.3Z, and 802.3ab. The converter features LED indicators for power status, SFP port traffic, and link status, providing clear and immediate feedback on operational status.

The SSF-SFP-SFP-CON operates on a DC 5V/1A power input with an AC adapter supporting 100 to 240V, consuming less than 4W. It supports IEEE 802.1Q Tag VLAN pass-through and double-tagged frame transparency, making it suitable for complex network environments. The converter is built to withstand operational temperatures ranging from 0 to 50°C and humidity levels from 10 to 90% non-condensing. Compact and robust, with dimensions of 90 x 60 x 20mm, this media converter is an ideal solution for enhancing network performance in data centers, enterprise networks, and telecommunications infrastructure.

HD Splice Cassette, Simplex, 9 µm OS2, 1m Pigtails

Cleerline™ HD Splice Cassettes provide an efficient solution for managing spliced fibers. This cassette comes preloaded with 6 strand single-mode SC/APC fiber pigtails, and its corresponding adapter plate.

These splice cassettes are sized to fit within any LGX compatible opening.

These cassettes have a removable transparent cover to allow easy fiber verification. All cassettes include heat shrink splice protection tubes, removeable splice organizers, and cable management accessories.

HD Splice Cassette, Simplex, 50 µm OM3, 1m Pigtails

Cleerline™ HD Splice Cassettes provide an efficient solution for managing spliced fibers. This cassette comes preloaded with 6 strand multimode SC fiber pigtails, and its corresponding adapter plate.

These splice cassettes are sized to fit within any LGX compatible opening.

These cassettes have a removable transparent cover to allow easy fiber verification. All cassettes include heat shrink splice protection tubes, removeable splice organizers, and cable management accessories.

HD Splice Cassette, Duplex, 9 µm OS2, 1m Pigtails

Cleerline™ HD Splice Cassettes provide an efficient solution for managing spliced fibers. This cassette comes preloaded with 12 strand single-mode LC/UPC fiber pigtails, and its corresponding adapter plate.

These splice cassettes are sized to fit within any LGX compatible opening.

These cassettes have a removable transparent cover to allow easy fiber verification. All cassettes include heat shrink splice protection tubes, removeable splice organizers, and cable management accessories.

HD Splice Cassette, Duplex, 50 µm OM3, 1m Pigtails

Cleerline™ HD Splice Cassettes provide an efficient solution for managing spliced fibers. This cassette comes preloaded with 12 strand multimode LC fiber pigtails, and its corresponding adapter plate.

These splice cassettes are sized to fit within any LGX compatible opening.

These cassettes have a removable transparent cover to allow easy fiber verification. All cassettes include heat shrink splice protection tubes, removeable splice organizers, and cable management accessories.

Gigabit 10/100/1000Base-Tx to 100/1000Base-X SFP Media Extender

Cleerline™ Standard Media Converters are non-managed stand-alone media extender, with speeds of 1G. The SFP slot allows for both Gigabit and Fast Ethernet operation, and can accept all SFP types, including multimode, single-mode, CWDM, DWDM, or BiDi. BiDi allows bi-directional transmission over a single strand of fiber.

25G SFP28 LR Transceiver SM 1310nm, 10Km reach, Dual LC

Cleerline™ SSF-SFP28-25GLR is a high performance 25G/28G LR single-mode and multi-rate SFP28 transceiver using 1310nm wavelength and reaching up to 10Km distance over 9/125um fibers. The module can be used for 25G Ethernet transmissions, and it is the building block of 100G single-mode fiber LR4 type transceivers.

The LR standard is used for medium and short-range fiber connections, due to increasingly popular single-mode fiber plant and very affordable costs. The SFP28 25G transceiver is backwards compatible with the SFP+ 10G rated transceivers.

The transceivers follow the industry standards of SFP Multi-Source Agreement (MSA) and SFF-8472, making them directly interchangeable with any networking device following industry standards.

2 x SFP to 8 x RJ45 PoE+ Gigabit Non-Managed Switch

The SSF-2SFPx8RJ45POE-1G PoE+ switch provides power and data from a single point, using Power over Ethernet (PoE+) over a single Cat-X cable. It can be used for any 10/100/1000mbps link and supply industry-standard IEEE 802.3af/at power. Advanced auto-sensing algorithm gives power to 802.3af/at end devices. 

In addition, the PoE+ switch automatically determines PoE+ requirements, speed, duplex, and cable type using Auto Uplink. Easy to operate and reliable. The PoE+ switch is ideal for powering PoE+ devices such as IP cameras, WLAN access point, IP phones, office access control systems, and other PD devices. This switch helps to provide an overall solution for Ethernet applications in different environments. 

Power Supply Included

1 x SFP to 4 x RJ45 PoE+ Gigabit Non-Managed Switch

The SSF-1SFPx4RJ45POE-1G is a 100/1000Base-X to Gigabit Ethernet 10/100/1000Base-T non-managed switch providing a solution to your endpoint devices. The SFP slot allows both Gigabit and Fast Ethernet operation and can accept all SFP types, including Multimode, Single-mode, CWDM, DWDM, or BiDi. 

In addition, the PoE+ switch automatically determines PoE+ requirements, speed, duplex, and cable type using Auto Uplink Easy to operate and reliable. This switch also features slimline housing with built in mounting brackets simplifying installation in tight spaces such as behind TV’s, work areas, or other applications. 

Power Supply Included

Small, empty wall mount with split metal door, with one lock/key. Fits 2 LGX adapter plates

The Cleerline™ SSF-SWM-SPLIT-WL-E2 is a versatile wall mount fiber distribution unit designed for both patching and splicing. This enclosure supports up to two LGX-118 compatible adapter plates, providing flexibility for various fiber termination connector types. It features two compartments to separate network terminations from distribution terminations, ensuring organized and secure management. The unit is equipped with a double outer door and key lock for enhanced security.

Constructed from durable aluminum with a black powder coat finish, the SSF-SWM-SPLIT-WL-E2 meets NEMA-2 standards. It includes cable entry tie-down points at the top and bottom, facilitating versatile installation options. The enclosure measures 13.8” H x 14” W x 2.2” D and weighs 7.1 lbs when empty. This unit is ideal for telecom closets, data centers, and other environments requiring reliable and organized fiber distribution.

LGX adapter plates are not included

Medium, empty wall mount with split metal door, with one lock/key. Fits 4 LGX adapter plates

The Cleerline™ SSF-MWM-SPLIT-WL-E4 is a versatile wall mount fiber distribution unit designed for both patching and splicing. This enclosure supports up to four LGX-118 compatible adapter plates or MPO cassettes. It features two separate compartments to isolate network terminations from distribution terminations, enhancing organization and security with a double outer door equipped with a key lock.

The unit is constructed from durable aluminum with a black powder coat finish and meets NEMA-2 standards. It includes cable entry tie-down points at the top and bottom, facilitating flexible installation. The SSF-MWM-SPLIT-WL-E4 measures 13.8” H x 14” W x 3.2” D and weighs 7.3 lbs when empty. This enclosure is ideal for various fiber termination applications, providing secure and efficient management in a compact form factor.

LGX adapter plates are not included

Industrial Power Supply 240W, AC 88-132VAC /176-264VAC, DC 48V Output 5A, DIN Rail Mountable

The Cleerline™ SSF-DIN-48V240W-PS Industrial Power Supply is a solution designed to provide stable power for industrial applications. It features an input voltage range of 88-132VAC or 176-264VAC and an output of 48V DC at 240W. This power supply offers essential protections against short circuits, overload, and over voltage, ensuring safety and durability. The unit is designed for easy DIN rail mounting and operates efficiently with free air convection cooling. It is rated for use in environments with temperatures ranging from -20 to +70°C, making it suitable for harsh industrial conditions.

This power supply is UL508, UL60950-1, and CE approved, confirming its compliance with stringent industry standards. With an output current of up to 5A and an adjustable output voltage range of 48-53V, the SSF-DIN-48V240W-PS ensures consistent and reliable performance. It features an LED power indicator for easy status monitoring and comes with a two-year warranty. This power supply is ideal for powering Cleerline Rugged Industrial Switches and other demanding industrial applications.

Industrial Power Supply 120W, AC 88-132VAC /176-264VAC, DC 48V Output 2.5A, DIN Rail Mountable

The Cleerline™ SSF-DIN-48V120W-PS Industrial Power Supply is a solution designed to provide stable power for industrial applications. It features an input voltage range of 88-132VAC or 176-264VAC and an output of 48V DC at 120W. This power supply offers essential protections against short circuit, overload, and over voltage, ensuring safety and durability. The unit is designed for easy DIN rail mounting and operates efficiently with free air convection cooling. It is rated for use in environments with temperatures ranging from -20 to +70°C, making it suitable for harsh industrial conditions.

This power supply is UL508, UL60950-1, and CE approved, confirming its compliance with stringent industry standards. With an output current of up to 2.5A and an adjustable output voltage range of 48-53V, the SSF-DIN-48V120W-PS ensures consistent and reliable performance. It features an LED power indicator for easy status monitoring and comes with a two-year warranty. With dimensions of 100 x 65.5 x 125.2mm, it is compact and easy to integrate into existing setups. This power supply is ideal for powering Cleerline Rugged Industrial Switches and other demanding industrial applications.

SC/UPC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ SC/UPC single-mode OS2 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your single-mode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ SC/UPC single-mode OS2 Connectors are compatible with all SSF™ fibers as well as standard 9/125 single-mode fibers.

SC/APC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ SC/APC single-mode OS2 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your single-mode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ SC/APC single-mode OS2 Connectors are compatible with all SSF™ fibers as well as standard 9/125 single-mode fibers.

SC/UPC Multimode OM3-4 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ SC multimode OM3/4 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your multimode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ SC multimode OM3/4 Connectors are compatible with all SSF™ fibers as well as standard 50/125 multimode fibers.

LC/APC Single-mode OS2 Connector for 250µm, 900µm, 2mm, 3mm

Cleerline™ LC/APC single-mode OS2 mechanical connectors ensure precise fiber alignment, producing low loss terminations for your single-mode fiber.

Connectors are compatible with 250 µm, 900 µm, 2 mm and 3 mm fiber cables. No crimping or proprietary tooling is required to terminate. The connectors feature a large confirmation window for easy verification and a V-groove channel for easy fiber insertion.

Cleerline™ LC/APC single-mode OS2 Connectors are compatible with all SSF™ fibers as well as standard 9/125 single-mode fibers.