Your Cart

Free Shipping on Orders > $99.99 - *Some Exclusions May Apply

expand/collapse
(704) 979-7100 (0)
  • 7.1 Home Theater Wall Plate w/ HDMI and Subwoofer
  • 7.1 Home Theater Wall Plate w/ HDMI and Subwoofer
  • 7.1 Home Theater Wall Plate w/ HDMI and Subwoofer

7.1 Home Theater Wall Plate w/ HDMI and Subwoofer

SKU#: WP-7.1-WHT

UPC#: 704438128298

60 Day Money Back Guarantee

100% Secure Shopping

warranty 10 year 1

Lifetime Warranty

SKU#: WP-7.1-WHT

UPC#:704438128298
$48.30

SKU#: WP-7.1-WHT

UPC#:704438128298

Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.

Local Pickup May Be Available in Concord, North Carolina for more information..

Califonia Warning 65

California Prop 65 Warning

×
For CA Residents Only.
California Proposition 65 Warning

Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.

• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.

For further information, please visit www.P65Warnings.ca.gov

  • Description+
  • 7.1 Home Theater Wall Plate with HDMI

    Down to the Wire

    The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

    Connect the Dots

    FireFold’s 7.1 Home Theater Wall Plate with HDMI and Subwoofer is an all-in-one solution for banishing the mess of wires by running them through the wall. This wall plate is based on the décor style of design which means the three insert panels are fully removable and can be used with other décor face plates. As it comes, this wall plate is compatible with three-gang junction boxes and low voltage brackets. Although labeled for an easy home theater set-up, this wall plate can be used for whole house audio as well. With seven pairs of red and black binding post connections, one RCA subwoofer jack, and a single high-speed HDMI connection, this wall plate is thorough and flexible.

    Binding posts are one style of connecting speaker wire to a device, source, or jack. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The black and red posts are marked on both the back and the front, which makes matching positive and negatives confusion-free. Please note this wall plate is not 3D or Ethernet ready.

  • Features+
    • Features 7 pairs of speaker binding posts and 1 RCA subwoofer connection
    • Contains one high-speed HDMI jack
    • Decor-style inserts can be removed and rearranged
    • Gold plated connectors prevent corrosion
    • FireFold Signature Lifetime Warranty
  • Specs+
    • High Speed HDMI Compliant
    • Ports
      • (16) Binding Posts
      • (1) RCA Port
      • (1) HDMI Port
  • Package Contents+
    • (1) 3 Gang Decor Wall Plate
    • (1) Left Speaker Decor Insert
    • (1) Right Speaker Decor Insert
    • (1) Center Channel + HDMI + Subwoofer Decor Insert
    • (6) 1-1/2" Phillips Mounting Screws
    • (6) 5/8" Phillips Mounting Screws
  • Reviews+
  • Q&A+
  • Is this 4K rated?

    No, this is not 4K rated.

    Is this HDMI 2.0?

    No, this is not HDMI 2.0.

    Are the inserts the same size as a decora insert?

    Yes, the inserts can be removed and used with a decora faceplate.

    What are the dimensions of this?

    This is a 3-gang plate, so it is 6-3/8" W x 4-1/2" H x 5/32" D.

    Do I have to follow the labels for the speakers?

    You do not have to follow the labels, but make sure you know which wires go to which speaker. Sticker labels can help with this.

    Does this support 3D and ARC?

    No, this does not support 3D or ARC.

    What size low voltage bracket do I need with this?

    You would need a 3-gang low voltage bracket.

    Do I have to use banana plugs?

    You do not have to use banana plugs, but they can make it much easier to connect, disconnect, and move your speakers and plate.

    7.1 Home Theater Wall Plate with HDMI

    Down to the Wire

    The reason wireless speakers have swooped onto the scene is obvious. Unfortunately, wireless systems can be impractical for many reasons or just plain expensive. Wrestling with speaker wire can be the most imposing part of setting up a home theater surround system. You don’t have to be tackling an extensive 7.1 set-up to be faced with the question of where the cables should go and how they should be connected. Let us ease your mind. It isn’t as complicated as it seems and you certainly don’t have to be stuck with the world’s largest cord mound right in the middle of your living room.

    Connect the Dots

    FireFold’s 7.1 Home Theater Wall Plate with HDMI and Subwoofer is an all-in-one solution for banishing the mess of wires by running them through the wall. This wall plate is based on the décor style of design which means the three insert panels are fully removable and can be used with other décor face plates. As it comes, this wall plate is compatible with three-gang junction boxes and low voltage brackets. Although labeled for an easy home theater set-up, this wall plate can be used for whole house audio as well. With seven pairs of red and black binding post connections, one RCA subwoofer jack, and a single high-speed HDMI connection, this wall plate is thorough and flexible.

    Binding posts are one style of connecting speaker wire to a device, source, or jack. They are mainly used with banana plugs but most, like these, can also be connected to bare wire. They can easily fit speaker wire up to 12 AWG and they do not require any type of soldering for a secure connection. The black and red posts are marked on both the back and the front, which makes matching positive and negatives confusion-free. Please note this wall plate is not 3D or Ethernet ready.

    • Features 7 pairs of speaker binding posts and 1 RCA subwoofer connection
    • Contains one high-speed HDMI jack
    • Decor-style inserts can be removed and rearranged
    • Gold plated connectors prevent corrosion
    • FireFold Signature Lifetime Warranty
    • High Speed HDMI Compliant
    • Ports
      • (16) Binding Posts
      • (1) RCA Port
      • (1) HDMI Port
    • (1) 3 Gang Decor Wall Plate
    • (1) Left Speaker Decor Insert
    • (1) Right Speaker Decor Insert
    • (1) Center Channel + HDMI + Subwoofer Decor Insert
    • (6) 1-1/2" Phillips Mounting Screws
    • (6) 5/8" Phillips Mounting Screws

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    G
    Gareth B.

    Delivered a day earlier than stated, very happy with the service and quality of product

    Is this 4K rated?

    No, this is not 4K rated.

    Is this HDMI 2.0?

    No, this is not HDMI 2.0.

    Are the inserts the same size as a decora insert?

    Yes, the inserts can be removed and used with a decora faceplate.

    What are the dimensions of this?

    This is a 3-gang plate, so it is 6-3/8" W x 4-1/2" H x 5/32" D.

    Do I have to follow the labels for the speakers?

    You do not have to follow the labels, but make sure you know which wires go to which speaker. Sticker labels can help with this.

    Does this support 3D and ARC?

    No, this does not support 3D or ARC.

    What size low voltage bracket do I need with this?

    You would need a 3-gang low voltage bracket.

    Do I have to use banana plugs?

    You do not have to use banana plugs, but they can make it much easier to connect, disconnect, and move your speakers and plate.

Open Google Reviews for our website ×