10% DISCOUNT PRODUCTS

Keystone Wall Plate with Mounting Screws

FireFold Keystone Wall Plates are compatible with any standard size keystone jack. They are made of durable ABS plastic for long life.

Available in a wide variety of colors and port configurations, these wall plates are quick and easy to install. Each plate comes complete with mounting screws.

Keep your cables organized and get a professional look.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Vertical Cable 1000ft Solid Cat6 Bulk Cable 

Ideal for the more advanced networking installations, Vertical Cable's Cat6 Bulk Cable is a must-have for any extensive networking application where a higher bandwidth is called for.

Category 6:

The next step up from standard Cat5E cable, Category 6 (Cat6) is a "twisted pair" network cable used for carrying data signals at speeds of up to 550MHz of Bandwidth. This cable is preferred for more advanced networking installations where a higher bandwidth than normal is required.

PVC Jacket

Our Cat6 Solid Bulk Cable comes wrapped in a sturdy PVC (Polyvinyl Chloride) Jacket, built to withstand high levels of stress, pulling, and pushing.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

Pull-Through Design

Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason why our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

Cat6 Keystone Jack In 110 Style & UL Verified - FireFold

The Cat6 jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wall plates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Cat6 Ethernet Patch Cable, White

Thanks to the fact that so much of our personal and professional lives now revolve around the Internet, to say that the quality of the networks that we depend on every day is important is a little bit of an understatement. Regardless of the size of the network you're constructing or even the environment that you're working in, anything less than the best just won't do in terms of your Cat6 Ethernet cable selections. For the jobs that matter most, FireFold is proud to lead the charge and offer some of the finest options available in that regard that money can buy.

With a performance of up to a stunning 550 MHz, our Cat6 Patch cable selections guarantee the speed, the versatility and the ingenuity you need when you need them the most. All of these cables feature not only an enhanced electrical performance (designed to support all of today's bandwidth-heavy applications), but they're also backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may currently be using.

All of these cables are constructed from four superior quality unshielded twisted pairs of 24 AWG stranded copper, complete with a sophisticated and rugged PVC jacket. The UTP wires themselves go a long way towards reducing the types of cross-talk that you're likely to experience in certain situations, all while helping to boost signal quality and data transmission at the exact same time. Even the RJ45 connectors have exceptional 50 micron gold plated contacts that are intended to help resist corrosion and degradation for years to come.

Not only that, but the molded strain relief boots present in our Cat6 Ethernet cable options help to avoid snags, tears and other issues during installation or maintenance that could potentially damage your cable over time. Make no mistake: these are molded in a very particular way not only to guarantee the flexibility you demand, but to also resist everyday wear and tear in a way that allows these cables to stand the test of time for years to come.

All Cat6 Ethernet cable options from FireFold come complete with a 60 day money back guarantee, a lifetime warranty and much, much more.

Cat5E Keystone Jack 110 Style - High Quality

The Cat5e Keystone Jack

The Cat5 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat5 Jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568-B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat5 jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even a RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Vanco Brush Bulk Cable Plate

This Bulk Cable Wall Plate from Vanco comes with a brush insert to help organize multiple cables. Provides a professional, finished look to your installation. Route your HDMI Cables and Audio/Video Cables for a home theater installation, or route network cables and VGA cables for a network Installation.

The Cat6A Keystone Jack

The Cat6A jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat6A jack provided by Vertical Cable provides outstanding performance, exceeding the TIA/EIA-568-B.2-10 industry standard. Because of this standard, these Cat6a jacks support the operation of 10Gig Ethernet applications. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat6A jack comes with a standard RJ45 plug on the outside. Wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.

These network jacks are designed with a shielded termination cap that minimizes additional AXT from neighboring connectors. They also feature twisted pair separation posts which minimize untwisting of pairs to allow for efficient installation and long-term peak performance.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant, and each is UL verified for quality and safety. These RJ45 jacks easily fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but also to allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wall plates with us, which allow you to customize easily what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Quality to Last a Lifetime

All FireFold keystone jacks come with a lifetime warranty. So, if something goes awry, and it is the product causing the issue, we’ll be more than happy to replace it for you - hassle free! Go ahead and get your hands on one, or many, of these today!

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Vertical Cable SKUs

• Almond 353-V2812/C6AAL
• Black 353-V2813/C6ABK
  
• Blue 353-V2814/C6ABL
• Gray 353-V2816/C6AGY
• Green 353-V2815/C6AGR
• Ivory 353-V2817/C6AIV
• Orange 353-V2818/C6AOR
• Red 353-V2820/C6ARD
• White 353-V2821/C6AWH
• Yellow 353-V2822/C6AYL

Vertical Cable Cat5E Keystone Jack 25 Pack - FireFold

Vertical Cable Cat5E 90 Degree Keystone Jack 25 Pack

The Cat5e Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat5e Jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568-B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat5e jack provided by us comes with a standard RJ45 plug on the outside. While on the inside, wiring slots are in place for a tool required termination. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free 110 style termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even a RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Blank Keystone Jack Insert

This blank insert is used to cover up any extra holes in a keystone wall plate. It is constructed from molded plastic and is designed for snap-in installation. This insert helps block dust accumulation that would occur due to opened ports in a wall plate and hide unsightly holes.

CAT5e Ethernet Patch Cable Snagless in White, RJ45, M/M

Anyone who has worked with networking equipment for any appreciable length of time can tell you that more often than not, the ongoing success of a network has less to do with any one major decision and is more about a series of smaller and more important ones. One of these has to do with the quality of the cabling that you use - something that you cannot afford to view as an afterthought any longer.

When you demand performance, flexibility and ingenuity all rolled into one convenient product, what you're really looking for is the Cat5E Patch Cable from FireFold. Our unique brand of Category 5 Enhanced snagless Ethernet cables aren't just designed to meet TIA/EIA-586 standards - with performance at up to 350 MHz in most cases, they often exceed them in the way that you can depend on.

For many, the best part of our cables is that they're already fully backwards compatible with any 10BaseT or 100BaseT networking cards and hubs that you may happen to have. This means that you can upgrade to our superior quality cables for all of the performance benefits they bring with them WITHOUT having to switch out your older equipment as a result.

But even going beyond that, our Cat5E Patch Cable options are fully constructed from four 24 AWG unshielded twisted pure copper wire strands in a sleek, convenient CMR rated PVC jacket. This means that they're absolutely approved for nearly any general indoor application that you may be working with.

The molded strain relief boot itself is also attached right at the connector, which will prevent snags and other events that could damage your cable either during installation or while performing routine troubleshooting and maintenance later on. Not only that, but our RJ-45 connectors all have 50 micron gold plated contacts - something that virtually guarantees that corrosion is NOT something you have to worry about any longer.

As is true with all of our other patch cable products, our Cat5E Ethernet Patch Cables also come complete with a lifetime warranty, a full 60 day money back guarantee and same day shipping in most situations. You'll also have the full might of our industry leading customer support team to turn to in the event that you should run into any issues.

NetStrand 1000ft Solid Cat6e Cable 

Ideal for the more advanced networking installations, NetStrand's Cat6 Bulk Cable is a must-have for any extensive networking application where a higher bandwidth is called for.

Category 6:

The next step up from standard Cat5E cable, Category 6e (Cat6e) is a "twisted pair" network cable used for carrying data signals at speeds of up to 600MHz of Bandwidth. This cable is preferred for more advanced networking installations where a higher bandwidth than normal is required.

PVC Jacket

Our Cat6e Solid Bulk Cable comes wrapped in a sturdy PVC (Polyvinyl Chloride) Jacket, built to withstand high levels of stress, pulling, and pushing.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

Pull-Through Design

Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason why our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

Cat6 Keystone Jack Toolless For Patch Panels - FireFold

The Cat6 Keystone Jack

The Cat6 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat6 Jack provided by FireFold provides outstanding performance, exceeding the ANSI/TIA/EIA-568-B.2 industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat6 jack provided by us comes with a standard RJ45 plug on the outside. These ethernet jacks are toolless. The unique toolless design does not require the use of a punch down tool. This can make things substantially faster when having to put many of these RJ45 jacks into place. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with an HDMI keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

RJ45 Strain Relief Boots 100 Pack

These RJ45 strain relief boots add additional protection to your connector and relieve strain and tension on your networking cable. They are flexible and provide a clean look to your cables. These are great for color coding your cables at the connection point for easy identification.

Cat5e Cable - Shielded Cable With 24AWG F/UTP 350MHz CMR

This Cat5E STP (Shielded Twisted Pair) cable is perfect for an indoor networking application in a noisy environment. This rating of cable contains a shielding designed to resist crosstalk and electromagnetic interference that comes with networking in close proximity to other cable sources.

Category 5E

Considered the Industry Standard for most network installations, Category 5E (Cat5E) is a "twisted pair" network cable used for carrying data signals at speeds of up to 350MHz of Bandwidth.

CMR-Rated PVC Jacket

Our Cat5E Solid Shielded Bulk Cable comes wrapped in a sturdy CMR-rated PVC (Polyvinyl Chloride) Jacket, built to withstand high levels of stress, pulling, and pushing.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

24AWG Solid Bare Copper Conductors

For this particular cable, the gauge is 24 AWG, which is a diameter of about 0.0201 Inches, or 0.511mm. 24AWG is the Industry Standard for any typical network cable installation. American Wire Gauge (AWG) is the standardized gauging system for measuring wire sizes.

Pull-Through Design

Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason why our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

Vextra 1000ft Solid CMR Cat6 Cable - 550MHz 23AWG USA Made

Vextra VC64B solid CMR Cat6 Ethernet cable is perfect for commercial and home networking, internet, control and monitoring circuitry and telephone lines. Solid 23AWG copper conductors and quality American-made manufacturing ensure a reliable connection every time.

Coax Keystone Jack F81 Female to Female Coupler

This is an F81 female to the female coaxial coupler. It features an F connector for installing a coaxial cable that is commonly used with cable and satellite television, CCTV, and high-speed Internet.

The outer housing is a molded plastic keystone insert that can be installed into a standard wall plate or blank patch panel.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Flat Cat6 Patch Cable RJ45 Connectors

FireFold’s Category 6 (CAT6 Ethernet cable) Ethernet cables are made to be at market standards, meeting and exceeding the TIA/EIA-568 standard. Each of these Cat6 patch cables are able to perform up to 550 MHz with a 50 micron gold plated contact RJ45 connector at either end of the cable to help against corrosion.

The CAT6 Ethernet cables are constructed from four flat 32 AWG stranded pair pure copper wire strands in a PVC cable casing. This means that the cables are more flexible and more readily usable for patch cables.

The PVC jacket that wraps around these cables is CM type, which means it is good for general use. The jacket itself is flatter than most, making it easier to run under carpeting or around baseboards. A molded strain relief boot rests upon each connector, helping prevent snags and damage to your cable.

CAT6 Ethernet cables are backwards compatible with any 10BaseT or 100BaseT network cards and hubs, allowing you to buy our cables and not have to switch out your older equipment. This simplifies nearly any network setup. Please note, however, that you must upgrade your equipment in order to take full advantage of the higher frequency and transfer rates.

Cat6 Keystone Jack For Networking Solutions - Coupler

The Cat6 Keystone Jack

The Cat6 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat6 Jack provided by FireFold provides outstanding performance, exceeding the ANSI/TIA/EIA-568-B.2 industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

These Cat6 Jacks fit into RJ45 wall plates, patch panels, or any standard RJ45 slot. They are perfect for connecting two patch cords without any punching down. Great for an application where you would be switching around wires on both sides of the keystone location.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with an HDMI keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

The Cat3 Keystone Jack

The Cat3 jack is a widely used keystone for basic voice applications. The Cat3 jack provided by FireFold is designed to provide excellent performance and durability. This Cat3 jack comes with an RJ11/RJ12 Keystone head and is a 6-position, 6-conductor keystone jack. RJ11 keystone jacks have been replaced for most data transfers for the newer RJ45 ended cables in Cat5 and Cat6 cabling standards.

These specific RJ11 keystone jacks require a tool for their cable installation. However, there is an excellent universal writing system label that allows for hassle-free wiring. So, no worries! You’ll be setting these up with ease in no time.

Meeting All Requirements

Each RJ11 keystone jack is flame retardant and meets current standards through TIA/EIA-568. This phone jack standard applies to commercial building cabling for telecom products. As well, each is ETL verified for quality and safety.

These RJ11 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. It should be noted that these RJ11 keystones will also work with most patch panels and surface mount boxes, not just wall plates alone.

You can find a variety of keystone wall plates with us, which allow you to customize easily what you put into each wall plate in your home. You could combine one of these with a coax keystone, or even an RJ45 keystone, with just an easy snapping of each keystone into their place.

Quality to Last a Lifetime

All FireFold keystone jacks come with a lifetime warranty. So, if something goes awry, and it is the product causing the issue, we’ll be more than happy to replace it for you - hassle free! Go ahead and get your hands on one, or many, of these today!

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Vanco Slim Bulk Cable Wall Plate

Simplify your cable installation with the WP-SLIMBULK from Vanco. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The minimum clearance for this plate is 1-3/16” and it is wide enough to accommodate the head of a VGA cable. The low, flattened profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.

Vertical Cable 1000ft Solid Shielded Cat6 bulk Cable 

This F/UTP cable is perfect for any indoor networking application in a noisy environment. This rating of cable contains a shielding designed to resist crosstalk and electromagnetic interference that comes with networking in close proximity to other cable sources.

Category 6

The next step up from standard Cat5E cable, Category 6 (Cat6) is a "twisted pair" network cable used for carrying data signals at speeds of up to 550MHz of Bandwidth. This cable is preferred for more advanced networking installations where a higher bandwidth than normal is required.

PVC Jacket

Our Cat6 Solid Bulk Cable comes wrapped in a sturdy PVC (Polyvinyl Chloride) Jacket, built to withstand high levels of stress, pulling, and pushing.

FTP (foiled twisted pair)

This type of cable comes complete with a Foil Shielding, to protect the signal strength of the cable and ensure that there is no signal loss due to nearby electrical equipment, or cross-talk from additional cables in close proximity.

23 AWG

For this particular cable, the gauge is 23 AWG, which is a diameter of about 0.0226 Inches, or 0.573mm. 23AWG is the Industry Standard for any typical network cable installation. American Wire Guage (AWG) is the standardized gauging system for measuring wire sizes.

Solid Cable Design

Designed for more straight-forward, simple installation, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

RCA Keystone Jack White Insert 

This is a White - Yellow RCA Keystone Insert. It has a molded plastic covering with an RCA port that passes through a signal. This product will install quickly and easily into a wall plate or patch panel and provide a convenient port to access in-wall cable.

Vertical Cable 75′ Roll Velcro Tie Wrap

Cat6 Cable by the Foot

Have the need for bulk cable, but don't need the whole box? FireFold has the answer for you! Bulk cable sold by the foot. This cable will be rolled out to your exact requested length.

Bulk (1000 ft) category 6 cable that has a bandwidth of 550 Mhz. The box is reinforced and allows for easy distribution of cable. Lining this cable is PVC material, which is durable yet flexible.

This cable offers speed. Since media is becoming very rich and on demand in today's networks, this extra bandwidth--nearly double of Cat5-- allows Cat 6 to be used on networks that are optimized for high bit rates.

Since bulk cable is normally used in intervals, the box that it comes in is almost as important as the cabling. Our boxes are reinforced to generally protect the cable. Also, they are easy to pull allowing the cable to be virtually kink less while being pulled out of the box.

PVC jackets are very common in networking cables and ours is no exception. This material is strong, protective, and flexible which are the characteristics desired in cables.

Cat6 Shielded Ethernet Patch Cable, Snagless Boot, White

Quality You Can Depend on On And Performance That Can't Be Beat

Regardless of the type of network, you're trying to construct - whether it's for use in a home or in a professional environment - it's safe to say that the stakes could not be higher. The Internet has become a ubiquitous part of our lives over the last decade, which means it's become a critical one, too. So much success in terms of network design and infrastructure support ultimately comes down to the quality of the cables and other accessories that you're using, which is a major reason why our shielded Cat6

Ethernet cable from FireFold is one of the most important purchases you can make at such a pivotal time.

Though our shielded Cat6 patch cable may seem simple, there's a lot hiding beneath that attractive and durable jacket. For starters, all of our cables are UL certified - meaning they don't just meet, but exceed, TIA/EIA standards. Likewise, our complete range of SSTP patch cables is obviously fully Cat6 compliant with not one but two layers of shielding.

So not only do you get a braided overall screen just beneath the sheath, but each individual pair also has rugged foil screening of its own. This unique shielding method goes a long way towards ruling out interference from a wide range of external sources, making these cables perfect for nearly any application that you might have in mind.

As is true with all of our Cat6 cables, these shielded Cat 6 patch cable options are fully terminated with RJ45 plugs that themselves feature 50 microns of gold. Thanks to the unique way that the cables are molded, you also don't have to worry about snags, tears, and other issues during installation or ongoing maintenance in the future. This construction also provides some much-needed strain relief for the cable, allowing it to dutifully stand the test of time for years to come.

All of our patch cables from FireFold come complete with a full 60-day money-back guarantee, fast and easy returns (should you need to do so, which is rare), are backed by an industry-leading customer support team, and are available to ship TODAY in most situations. Truly, it doesn't get much better than that.

1000ft Cat6A Shielded Solid Network Cable

Vertical Cable 064 Series 1000ft Cat6A 10GS Shielded Solid Network Cable is a high-performance data communications cable capable of 10GS high-speed applications. It is riser-rated for indoor use and arrives on a wooden spool. Sequential foot markings on the jacket allow quick and easy measuring and installation.

Benefits of Using the CAT6A F/UTP CMR – 064-700s Series

Choosing the CAT6A F/UTP CMR – 064-700s Series means you will benefit from a range of advantages, making it a perfect fit for those who require uncompromising reliability in their network cabling.

1. High-Speed Data Transmission- The CAT6A F/UTP CMR – 064-700s Series is designed to handle 10Gbps data rates with ease, fulfilling the needs of business-critical applications that require fast and efficient data processing capabilities. This cable is perfect for data centers, server rooms, and high-traffic building installations.
   
2. Enhanced Performance – This cable exceeds the performance standards set by ANSI TIA/EIA 568-C.2. You can rely on it for seamless connections, reduced crosstalk, and minimized interference, making it the ideal choice for high-density network environments.
   
3. Compatibility with Power over Ethernet (PoE)- The CAT6A F/UTP CMR – 064-700s Series supports PoE++ technology, allowing users to power devices through the same cable used for data transfer. This feature eliminates the need for additional wiring installations, simplifying network setups and reducing costs.
   
4. Easy Installation- The color-striped pairs within the cable provide straightforward identification during installation, reducing errors in wiring configurations. Whether you’re a professional installer or a DIY enthusiast, this user-friendly design makes it easier to get the job done quickly and efficiently.
   
5. Indoor-Only Suitable- As a CMR-rated cable, the CAT6A F/UTP CMR – 064-700s Series is specifically designed for indoor applications, adhering to safety regulations that prevent the spread of fire and smoke in multi-story buildings. This makes it a prudent choice for both residential and commercial installations.
   

Why Choose the CAT6A F/UTP CMR – 064-700s Series?

With the increasing demand for high-speed networks, the importance of reliable cabling solutions cannot be overstated. The CAT6A F/UTP CMR – 064-700s Series offers exceptional value, durability, and performance, making it the go-to option for both networking professionals and end-users. It is versatile enough for various applications while ensuring that your network infrastructure is future-proof, keeping pace with the demands of modern technology.

Don’t compromise your network’s potential; choose the CAT6A F/UTP CMR – 064-700s Series for superior data transmission, enhanced performance, and reliability you can count on. For more great options, visit our CAT6A CMR Riser category.

Vanco WPBWW Bulk Cable Wall Plate

Simplify your cable installation with Vanco’s WPBW. This spout-style bulk cable wall plate can be used to cover the exit point for low voltage cables to create a clean, professional look without adding any extra time or wire. Using the included color-matching screws, this wall plate attaches easily to any gang box or bracket. The low 1-1/4” profile means this wall plate can fit safely in many tight spaces including behind furniture and some television mounts. In visible areas, the smooth glossy finish and natural white color make this pass-through wall plate a sensible choice.

The Cat5e Keystone Jack - FireFold

The Cat5 Jack is the most widely used keystone jack in today’s market for networking wall plate solutions or patch panels. Each Cat5 Jack provided by FireFold provides outstanding performance, exceeding the TIA/EIA 568-B industry standard. This makes these keystone jacks perfect for use in today’s high-speed networks while remaining completely backward compatible with all previous standards.

The Cat5 jack provided by us comes with a standard RJ45 plug on the outside. These ethernet jacks are toolless. The unique toolless design does not require the use of a punch down tool. This can make things substantially faster when having to put many of these RJ45 jacks into place. All of our networking keystone jacks have 568A and 568B color codes on the jacks in addition to the easy trouble free termination.

Meeting All Requirements

Each RJ45 keystone jack is flame retardant and each is UL verified for quality and safety. These RJ45 jacks are 14.5mm wide by 16mm high and are easily able to fit in most standard keystone jack wall plates. Plus, they come in a variety of colors - both to help you keep your cables organized but to also allow you to match your keystone easily to whatever colors you are planning.

You can find a variety of keystone wallplates with us, which allow you to easily customize what you put into each wall plate in your home. You could combine one of these with an HDMI keystone, or even an RJ11 keystone, with just an easy snapping of each keystone into their place.

Please note: Slight hue variations may occur between keystone jacks and the matching keystone wall plates. If you need to ensure there is no variation, please contact customer service at 704-979-7100 before placing your order.

Vertical Cable 500ft 16 Gauge In-Wall Speaker Wire  - Cut and Run

Whether you are a seasoned professional or just trying to think like one, choosing home theater speaker wire often comes down to the classic combination of quality and quantity. Shopping at FireFold means you can find everything you are looking for all at once without a lofty price tag. There are several questions you should be able to answer while shopping for speaker wire. The gauge you need, how much you need, and where you are planning to run the cable all affect which product would best suit your installation. For larger tasks, bulk speaker wire offers the best value. We carry in-wall and outdoor bulk speaker wire in a variety of lengths and gauges.

What’s in the Box?

This 500’ box of 16 gauge wire is perfect for many projects including surround sound and intercom systems. CL3 in-wall rated, it is designed to meet the National Electrical Codes (NEC) standards for fire safety. A white PVC jacket and stranded copper design means this cable can handle the bends and twists of any indoor installation. It also means this wire is sturdy and protected enough to stand up to countless years of use. How many years? How does a lifetime sound? Every foot of speaker wire in this box comes with FireFold’s Signature Lifetime Warranty.

This 16 AWG two-conductor wire is ideal for runs to single speakers or receivers. The polarized wires are color coded in red and black plastic sheaths to make identifying the positives and negatives easy no matter how long the distance. 99.99% oxygen-free copper conductors carry crystal clear sound while reducing the risk of degradation and corrosion over time. The cable jacket and box were both designed with professional usage in mind. Sequential length markings along the cable jacket take the guesswork out of measurements and the pull-through box saves you time by preventing kinks.

Cat5E Bulk Cable - Vertical Cable In 24AWG 350MHz UV-Rated

Outdoor, UV Rated Cat5e Bulk Cable is a necessity for any Standard Outdoor Cable Runs in which networking cable is exposed to direct sunlight and weather.

Outdoor, UV Rated

Built to withstand the destructive forces of the outdoors and the sun's UV Radiation, our UV Rated Outdoor Cat5e Cable is designed to protect against harmful UV Interference while being exposed to direct sunlight and prevent any significant signal loss.

Category 5

Considered the Industry Standard for most network installations, Category 5 (Cat5E, or Cat5) is a "twisted pair" network cable used for carrying data signals at speeds of up to 350MHz of Bandwidth.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

24 AWG

For this particular cable, the gauge is 24 AWG, which is a diameter of about 0.0201 Inches, or 0.511mm. 24AWG is the Industry Standard for any typical network cable installation. American Wire Guage (AWG) is the standardized gauging system for measuring wire sizes.

Pull-Through Design

Since bulk cable is used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

Cat5E Ethernet Patch Cable Snagless in White, Shielded

350 MHz FTP Cords With Performance to Spare

When you're putting together a network, you can't just pick things like patch cables based on your needs as they exist today. Getting the network up and running is one thing. Making it easy to maintain and support that network over time is something else entirely, which is why the solutions you choose in terms of even something (seemingly) simple like patch cables could not be more critical to what you're doing.

When you need a solution that provides both the quality and the versatility necessary to guarantee the top performance in all of today's high speed networks, you need the Shielded Cat5E Patch Cable from FireFold whether you realize it or not. This 350 MHz FTP cord, available in lengths from 0.5 feet to 200 feet for you to choose from depending on your needs, come with a wide array of different features that make it the option to beat across the industry.

For starters, these cables feature a very unique kind of enhanced electrical performance - perfect for supporting the bandwidth intensive applications of today in a way that also prepares your network to help tackle the challenges of tomorrow. Network architects everywhere can also rejoice: these cables are also fully backwards compatible with any 10BaseT or 100BaseT network cards and hubs that you may already be using.

Likewise, these cables are constructed of no less than for totally foiled twisted pairs of 26 AWG stranded copper, complete with a rugged and ultra durable PVC jacket. The FTP wires themselves put you in an excellent position to both eliminate cross-talk and help boost signal quality, all while going a long way towards supporting traditional data transmission as well. Last but not least, our Shielded Cat5E Patch Cable also features RJ45 connectors with 50 micron gold plated contacts - an invaluable feature that helps to guard against corrosion, degradation and absolutely everything in between.

As is true with all patch cable purchases from FireFold, these Cat5E Shielded Ethernet Patch Cables come complete with our industry leading lifetime warranty and are backed by the full might of our incredible customer support team. Not only that but you can also enjoy same day shipping on most orders, fast and easy returns (in the unfortunate event that the need should arise) and much, much more.

CAT5E Surface Mount Box - White & Ivory

When installing a wall plate isn't practical, these surface mounts will do the trick. They're convenient, simple, and help maintain that professional look.

The compact, space-saving design is easy to install and come installed with one or two Cat5E Keystone Jacks.

Quest Oversized Keystone Wall Plate, Single-Gang

Quest MIDI keystone single-gang wall plates are oversized wall plates (3.1"w x 4.8"h) designed for standard use, as well as for the purpose of hiding mistakes in incorrectly cut mounting holes in the sheetrock. Available in 0, 1, 2, 3, 4 & 6 port versions; are designed for vertical mounting on a wall; and are constructed for use with any standard keystone inserts.

Single Gang Junction Box 

On-Wall Plates

Not all walls are created equal, especially when it comes to installation projects. Sometimes location, building code, or materials prevent running wires in the wall. Brick and cement walls are especially challenging, but that doesn’t mean you’re out of options. With a surface mount box like the SINGLE-GANG, you can create a way to attach wall plates without having to cut into your wall. Any low voltage wall plate will work: keystone, speaker, decora, HDMI. Just attach the wall plate to this single gang box like you would any other low voltage bracket using the two machine-threaded screw casings.

The SINGLE-GANG is designed for surface use and is not meant to be recessed fully into the wall. It offers several points of access for running your cables to it and through it. There are two rectangular knock-outs for use with Raceway cable cover systems and a 1.25” opening for conduit. To affix this single gang box to a wall, floor, or other surface, there are several holes to accommodate screws, nails, or other hardware. The smooth plastic is not porous enough to accept latex-based paints, but this single gang surface mount box is also available in beige.

2C/22 AWG STRANDED PVC 500FT COIL PACK

SCP's Security Wire Coil Packs are very popular with installers because they are easier to work with than boxes or reels. These security wire coil packs come in 22 AWG with either 2 or 4 stranded bare copper conductors in 500 or 1000 ft lengths. SCP Security Wire Coil Packs are tangle-proof, take up less space, and because there is no box or spool, there is less waste and clean-up after the job.

Installation of SCP Security Wire Coil Packs saves time when pulling multiple wires. Because the wire pulls through the middle of the coil pack, installers can stack the coil packs and pull multiple wires in parallel for faster installation. SCP Security Wire Coil Packs with stranded conductor are available in 10 different PVC jacket colors. SCP security wire coil packs are great for security, alarm, and control installations. All SCP security wire coil packs are UL and Riser Rated.

Cat5e Cable - Vertical Cable Of 1000ft & Solid Plenum

Perfect for any networking application where Plenum Rated network cable is a requirement. FireFold's Cat5e Plenum Rated Bulk Cable is a must-have for any extensive networking installation.

Plenum (CMP) Rated PVC Jacket

Plenum rated Cat5E cable contains a flame retardant PVC jacket and is designed for cable runs being laid in spaces defined as "Air Plenums", this includes raised flooring systems, air handling ducts, etc. Plenum jackets produce less smoke than traditional PVC jackets.

Category 5

Considered the Industry Standard for most network installations, Category 5 (Cat5E, or Cat5) is a "twisted pair" network cable used for carrying data signals at speeds of up to 350MHz of Bandwidth.

Solid Cable Design

Designed for more straight-forward, simple installation, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

24 AWG

For this particular cable, the gauge is 24 AWG, which is a diameter of about 0.0201 Inches, or 0.511mm. 24AWG is the Industry Standard for any typical network cable installation. American Wire Gauge (AWG) is the standardized gauging system for measuring wire sizes.

Pull-Through Design

Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

Vertical Bulk Cable 1000ft Bulk RG-6 Coax Cable

Today, RG6 coaxial cables are popularly used to carry information over long distances into homes and businesses. Suitable for HDTV applications, Cable and Satellite installations, and featuring an aluminum shield for maximum protection against interference.

RG6U 1000ft Single Quad Shield has additional foil shields or braids to provide greater protection against electromagnetic interference and is a more durable cable. House in a sturdy pull box for the optimum interface, organization, storage, and transportation.

Winnie Industries Magnetic Cable Tie Mount

Features a 16-26 lb permanent rare earth magnet.

Cradles a standard cable tie to secure a wide array of wires and cables.

Can stick through oil, greasy, dirty/soiled areas. Repositionable for within electric panels, Hide cables inside I beams, etc.

Safety:

• Please handle neodymium magnets with care
  
• Keep neodymium magnets away from anyone with a pacemaker
  
• Magnets are not toys and should be kept away from children and pets
  
• Large powerful magnets can pinch your fingers or cause other injuries, use caution

Cat6A Slim Ethernet Patch Cable

The FireFold CAT6A Slim Line Ethernet cable is the solution to reduce congestion in high-density CAT6A Network environments, such as data centers,telecommunication, and server rooms. With the Cat6A Slim Line cable, you can fit more cables in the same space. The slim cable diameter is almost half that of a standard CAT6A cable.

1000ft Solid Cat6 Plenum-Rated Bulk Cable - Made in the USA

Perfect for any networking application where Plenum Rated network cable is a requirement. FireFold's Cat6 Plenum-Rated Bulk Cable is a must-have for any extensive networking installation.

Plenum (CMP) Rated PVC Jacket

Plenum-rated Cat6 cable contains a flame retardant PVC jacket and is designed for cable runs being laid in spaces defined as "Air Plenums", this includes raised flooring systems, air handling ducts, etc. Plenum jackets produce less smoke than traditional PVC jackets.

Solid Cable Design

Designed for more straight-forward, simple installations, this particular style of Solid cable is perfect for most installations where cable runs do not require several bends and twists in the line.

23 AWG

For this particular cable, the gauge is 23 AWG, which is a diameter of about 0.0226 Inches, or 0.573mm. 23AWG is the Industry Standard for any typical network cable installation. American Wire Gauge (AWG) is the standardized gauging system for measuring wire sizes.

Pull-Through Design

Since bulk cable is generally used in intervals, the box that it comes in is almost as important as the cable itself. This is the reason why our boxes are reinforced to provide excellent protection and are made with a simple pull-through design to keep your bulk cable free of kinks and knots while being pulled from the box.

White Blank Wall Plate

Into the Void

When it comes to home improvements, the sad- and sometimes frustrating- truth is that nothing is ever permanent. Floor plans shift, technology is updated, and tastes change. Regardless of whether your project has just started, just finished, or is stuck somewhere in between, maintaining a professional appearance is just as important as making life easier for yourself in the future. Wiring your home can be a messy project and it often leaves you with plenty of holes to cover. You’ve probably seen blank wall plates before and many people wonder what they are for. Wall plates are most often used to plug into in-wall wiring, but blank plates don’t have any openings. Why use one?

Fill in the Blank

Blank wall plates like FireFold’s WP-0 are used to cover the site of an old, unused connection, the site of a potential connection, or just the site of a hole left by construction. When time, effort, or future use is in question, blank wall plates provide an easy, inexpensive alternative to patching drywall. They create a clean, intentional look while keeping debris out of your stud bays. Which blank wall plate you need depends on your current décor and how large an opening you have to cover.

The WP-0 White Blank Plate is a white two-hole single-gang plate. Molded from UL listed impact resistant thermoplastic, this high-quality wall plate is solid and durable. It comes with a pair of color-matched screws and fits over any standard one-gang box or bracket. The smooth, glossy finish matches most wall plates and the beveled edges keep the WP-0 low-profile and inconspicuous. Installing this plate over an existing box takes seconds and requires only a screwdriver. Replacing it later with another single-gang wall plate is just as simple. With a lifetime warranty, you can expect this blank plate to last through endless projects.

USB 2.0 Type C to Type A Cable 3ft

Charge and sync a smartphone, tablet, or mobile device without the hassle of interference or signal loss. Enjoy the convenience of the reversible USB C connector, which can be plugged in, regardless of orientation. This cable works with the latest generation of Android phones, including Samsung Galaxy Note 7, Google Pixel/Pixel XL and LG G5/V20.

4C/22 AWG STRANDED PVC 500FT COIL PACK

SCPs Security Wire Coil Packs are very popular with installers because they are easier to work with than boxes or reels. These security wire coil packs come in 22 AWG with either 2 or 4 stranded bare copper conductors in 500 or 1000 ft lengths. SCP Security Wire Coil Packs are tangle-proof, take up less space, and because there is no box or spool, there is less waste and clean-up after the job.

Installation of our Security Wire Coil Packs saves time when pulling multiple wires. Because the wire pulls through the middle of the coil pack, installers can stack the coil packs and pull multiple wires in parallel for faster installation. SCP Security Wire Coil Packs with stranded conductor are available in 10 different PVC jacket colors. Our security wire coil packs are great for security, alarm, and control installations. All of our security wire coil packs are UL and Riser Rated.

Cat6A Ethernet Patch Cable

These network cables enable 10-Gigabit data transmission over a 4-connector twisted pair copper cable, allowing connection distances of up to 100 meters. Current Cat6 cabling systems may only support 10-Gigabit Ethernet over limited distances. The Cat6a draft extends the Cat6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable.

Cat6a also utilizes a new generation of connecting hardware that is superior to standard Cat6.