- Made in the USA
- Lifetime Limited Manufacturer Warranty
- 1 set of adjustable mounting rails
- Removable locking side panels
- Cage nut style mounting rails
- Tempered safety glass door
- Swings out 90 degrees from the wall
- Cage nuts are not included
- 150 lb. weight capacity
- Depth: 25.99" (outside) | 21.5" (inside)
- Width: 23.50 (outside) | 19" (inside)
- Height: 24.13" (outside) | 21" (inside)
- Weight: 58 lbs
Swing-Out Wall Mount Cabinets allow easy access to all four sides of installed equipment. When installing and terminating network cables these swing-out cabinets make the job much easier. Swing-out style wall mount cabinets can be used for nearly every type of installation.
Also known as a Rack Unit, 12U is the amount of space provided within the Cabinet. A measurement of "12U" is 12 Inches.
90 Degree Swing-Out Design
Perfect for installations where access to component rear panels is necessary, enclosure can be swung out 90° from the back frame. The Swing-Out Design is great for jobs where the rear section may need to be separated from the mount, making it easy to access the back of your patch panels, media servers, etc.
Strategically placed laser knock-outs provide a plethora of locations to feed copper or fiber optic cabling into the cabinet, or to install an optional Fan Kit for temperature control.
The included set of cage-nut-style rails fully adjust in 1 inch increments to accommodate the various depths of equipment on the market.
Removable Side Panels
Easy-to-remove side panels provide more access for growing or changing cabling schemes, as well as offer the option for increased air flow to prevent equipment from overheating.
Locking Doors and Side Panels
The locking feature provides additional security for all three access points, to keep your valuable rack mounted equipment safe from unauthorized use.
Reversible Glass Door
Tempered safety glass door can be removed or reversed to be left or right mounted, to accommodate your particular installation
- (1) 12U Swing-Out Wall Mount Cabinet