Evolution 4K HDR 1×4 HDMI Splitter over Cat6 Cable with HDMI Loop-out (Receivers Included) PoE Receivers, 4K HDR 230ft/70m 1080p 330ft/100m
SKU#: EV4K7014
UPC#:741835120654
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Allows a single source to be split and extended to multiple displays
- Complete kit with (4) PoE Receivers included
- Features an additional HDMI output which can be used for a local display or to cascade to another splitter for a larger distribution system
- Transmission Range: Extends 4K@60Hz, 4:4:4 Chroma with HDR10 and IR up to 230ft/70m and 1080p up to 330ft/100m over a single Cat6 cable
- Features Power over Ethernet (PoE) Technology which transmits power over Cat6, allowing the receivers to be powered without connecting a power supply
- Latency under 30ms
- Supports bi-directional IR (20~60kHz) for source or display control
- IR accessories included allowing for source control from each UTP display location
- Features auto and manual EDID options for compatibility with source and displays
- Digital audio breakout on the receivers for source audio extraction
- HDCP 1.4/2.2 compliant
- Slim and compact design
- RS232 control of splitter
- Pure uncompressed 7.1 ch digital audio
- Supports DTS-HD and Dolby TrueHD high bit rate audio
- Splitter Dimensions: 14.3” L x 4.09 W x 0.9” H (264.40mm L x 104 mm W x 23.85mm H)
- Receiver Dimensions: 4.17” L x 3.8” W x 0.75” H (106 mm L x 99mm W x 19.20mm H)
- Specs+
- Package Contents+
- (1) EV4K7014 1×4 Splitter
- (4) EV4K7014 PoE Receivers
- (1) IR Blaster
- (4) IR Receivers (display)
- (1) 3-pin terminal block (phoenix connector)
- (1) 12V/3A power supply
- (1) Set of mounting hardware and screws
- (1) Product Manual
- Reviews+
- Allows a single source to be split and extended to multiple displays
- Complete kit with (4) PoE Receivers included
- Features an additional HDMI output which can be used for a local display or to cascade to another splitter for a larger distribution system
- Transmission Range: Extends 4K@60Hz, 4:4:4 Chroma with HDR10 and IR up to 230ft/70m and 1080p up to 330ft/100m over a single Cat6 cable
- Features Power over Ethernet (PoE) Technology which transmits power over Cat6, allowing the receivers to be powered without connecting a power supply
- Latency under 30ms
- Supports bi-directional IR (20~60kHz) for source or display control
- IR accessories included allowing for source control from each UTP display location
- Features auto and manual EDID options for compatibility with source and displays
- Digital audio breakout on the receivers for source audio extraction
- HDCP 1.4/2.2 compliant
- Slim and compact design
- RS232 control of splitter
- Pure uncompressed 7.1 ch digital audio
- Supports DTS-HD and Dolby TrueHD high bit rate audio
- Splitter Dimensions: 14.3” L x 4.09 W x 0.9” H (264.40mm L x 104 mm W x 23.85mm H)
- Receiver Dimensions: 4.17” L x 3.8” W x 0.75” H (106 mm L x 99mm W x 19.20mm H)
- (1) EV4K7014 1×4 Splitter
- (4) EV4K7014 PoE Receivers
- (1) IR Blaster
- (4) IR Receivers (display)
- (1) 3-pin terminal block (phoenix connector)
- (1) 12V/3A power supply
- (1) Set of mounting hardware and screws
- (1) Product Manual
Evolution 4K HDR 1×4 HDMI Splitter over Cat6 Cable
The EV4K7014 is an HDMI splitter that allows one HDMI input to be split and sent to up to five displays simultaneously. With four outputs over UTP, and one output over HDMI, the EV4K7014 allows for a local display connected, or to daisy chain additional units to gain more outputs. The EV4K7014 includes four receivers (EV4K7014-RX) as a kit, which are PoE, and do not require any power supplies at the display end. Extends 4K@60Hz 4:4:4 with HDR10 and IR control up to 230ft/70m over a single Cat6 cable. IR accessories are included to allow IR pass-through for controlling the source at each UTP display location. For splitting and distributing one single source to multiple displays, while extending over Cat6, the EV4K7014 is a great solution for any application with the ability to expand.
*NOTE - All specifications and ratings for the EV4K7014 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieving rated distance, and maximizing the resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.
Evolution 4K HDR 1×4 HDMI Splitter over Cat6 Cable
The EV4K7014 is an HDMI splitter that allows one HDMI input to be split and sent to up to five displays simultaneously. With four outputs over UTP, and one output over HDMI, the EV4K7014 allows for a local display connected, or to daisy chain additional units to gain more outputs. The EV4K7014 includes four receivers (EV4K7014-RX) as a kit, which are PoE, and do not require any power supplies at the display end. Extends 4K@60Hz 4:4:4 with HDR10 and IR control up to 230ft/70m over a single Cat6 cable. IR accessories are included to allow IR pass-through for controlling the source at each UTP display location. For splitting and distributing one single source to multiple displays, while extending over Cat6, the EV4K7014 is a great solution for any application with the ability to expand.
*NOTE - All specifications and ratings for the EV4K7014 have been tested and confirmed using Cat6 cabling. Cat6 or better is strongly recommended for optimum performance, achieving rated distance, and maximizing the resolution capabilities of this product. Cat5e is not recommended and may not achieve distance and/or resolution expectations.
