The Chief Mounts SYSAU is an all-in-one projector mount kit designed to cut installation time by one-third. It includes everything needed for most installations, with the mount and column preassembled. It features high-performance, non-sacrificial SurgeX® power accessory comes integrated to provide added protection for audio/video equipment.
The adjustable ceiling plate allows above or below tile placement and accommodates inconsistent T-grids. It is compatible with popular two gang adjustable mud rings.
Convenience is at a premium with this mount, as the tool-free Microzone adjustment eliminates the need for set screws and tool-free lockdown enables fingertip positioning with minimal effort. A Q-Lock quick release lever enables quick connection or disconnection of the projector, so servicing is a breeze, while the integrated key and lock system provides added security.
- Compatibility: 2x2', 2x4', 60x60 cm, 62.5x62.5 cm Ceiling Grids
- Adjustments: Roll, Pitch, Yaw (3°, 10°, 360°)
- Extension: 0-12" (0-304.8 mm)
- Power: Output 15A, 1875 W Continuous
- Dimensions: 19.82 x 7.25 x 24.94" (503.5 x 184.2 x 633.6 mm)
- Power Consumption:
- Voltage Protection Rating: 600V L-N, N-G; 800V L-G
- Maximum Continuous Operating Voltage: 240V
- Nominal Discharge Current (In): 3kA
- Short Circuit Current Rating: 5kA
- Ambient Temperature Max: 40°C
- Weight Capacity: 35 lbs. (15.9 kg.)
- Instruction Manual
- Technical Drawing
- (1) Universal Interface Plate
- (1) Suspended Ceiling Plate Assembly
- (4) Universal Interface Legs
- (1) Projector Mount and Column
- (4) M2.5x10mm Screws
- (4) M3x10mm Screws
- (4) M4x10mm Screws
- (4) M5x14mm Screws
- (4) M6x14mm Screws
- (4) M4x25mm Screws
- (4) M6x25mm Screws
- (4) M5x25mm Screws
- (4) M3x25mm Screws
- (4) M4 Washers
- (4) .500x.256x.625" Spacers
- (4) 10-24 x 3/8" Security Screws
- (2) 5/32" Security Allen Wrench
- (4) Screw Adapters
- (4) 1/4-20 Wingnuts
- (1) Column Trim Ring
- (1) Ceiling Tile Cutter
- (4) .262 x 1-5/16" Screw Eyes
- (4) Cable Locks
- (4) 1/4" x 2" Wire Anchors
- (1) 1/4-20 x 5/8" Screws
- (1) 10-24 x 1/4" Security Screws
- (8) 10-24 x 5/8" Screws
- (4) 1/16" x 25' Cable
Will this work with my projector?
This will work with most projectors weighing 35 lbs or less.
Why would I need this?
You would need this if you were installing on a grid tile ceiling.
How far down does this hang?
This has an 19.8 inch long arm.
Will I need anything else?
You will need an drill appropriate for your work surface, and you will want a drop cloth to protect your space from debris. Depending on the structure, you may also need drop poles or ceiling adapters.
Do you need a stud to mount this?
Yes, you need a stud or joist for this mount.
Can this be adjusted when it's installed?
Yes, you can adjust this up and down, side to side, and 360 degrees around.