Zigen HDMI Extender Set over Single Coax - Up to 100m, High Speed HDMI, 3D

HDMI Extender Over Coaxial Cable

The ZIG-CX-100 kit contains both the transmitter and receiver required to extend your HDMI signal up to 100 meters over a single coax cable. It can also transmit bidirectional control signals for ultimate control of your devices.

This HDMI extender set can be used as a stand alone solution or it can be integrated with matrix switch setups to extend the input or output cable distance.

• Supports 1080p Resolution up to 330ft (100m)
• Uses a Single RG-6 Quad Coax Cable
• Supports 5.1/7.1/Stereo Audio (Including PCM and Non PCM, HD Audio, etc.}

• Operating Temperature Range: -5 to +35°C (-41 to +95 °F)
• Operating Humidity Range: 5 to 90 % RH (no condensation)
• Input Video Signal: 0.5-1.0 volts p-p
• Input DDC Signal: 5 volts p-p (TTL)
• Supported Video Formats: DTV/HDTV; 640X480P 60HZ; 800X600 60HZ;1024X768 60HZ; 1280X768 60HZ;1360X768 60HZ; 1280X960 60HZ;1280X1024 60HZ; 1400X1050 60HZ;1440X480I 60HZ; 720X480P 60HZ;1440X576I 50HZ; 720X576P 50HZ; 1440X576P 50HZ; 1280X720P 50HZ/60HZ; 1920X1080I 50/60HZ; 1920X1080P 24/25/30/50/60HZ; 1280X720P 3D 50/60HZ; 1920X1080I 3D 50/60HZ; 1920X1080P 3D 24HZ
• Output Video: HDMI1.4+HDCP
• Output Audio: Support 5.1/7.1/stereo audio (Including PCM and non PCM, HD ADUIO, etc)
• Maximum Transmission Distance: 100 meters on RG-6QUAD; 50 meters (SYV75-5 coax cable)
• Power Supply: 5V/3A DC
• Power Consumption: 7.5 Watts (ZIG-CX-100 Tx), 8 Watts (ZIG-CX-100 Rx)
• Dimensions: 157mmL×118mmW×25mmH
• Mass (Main unit): 0.92Kg / 2.02lb (Pairs)

• (1) ZIG-CX-100 Receiver
• (1) ZIG-CX-100 Transmitter
• (1) Operating Instructions
• (2) 5V 3A DC Power Supplies
• (1) IR TX Unit (IR Emitter Cable)
• (1) IR RX Unit (IR Receiver Cable)