Project like a Pro
Mounting your projector on the ceiling is one of the quickest and easiest ways to clear up clutter and create a polished, professional look in your home theater. There are many options when it comes to selecting a projector mount, and it can sometimes be difficult to determine which one you need. Crimson AV’s JKR3-18A ceiling projector mount kit eliminates much of the guesswork involved in purchasing a mount and even offers unparalleled flexibility during the mounting process. With several points of adjustment and a drop pole, this projector mount allows for complete customization.
Attaching anything to the ceiling can seem like a challenge, but with the JKR3-18A mounting kit, security and installation are never a concern. Crafted from aluminum and high-grade cold-rolled steel, this mount is rated for a projector weight of up to 70 lbs. The wide 13.8” mounting pattern also makes it compatible with a huge range of home and professional projectors. The 12-18” drop pole offers a channel to run cables through for an especially clear and mess-free look.
Once the JKR3-18A universal ceiling mount has been installed, changes can be made to the angle of the projector to best aim, focus, and tweak the picture you desire, which makes it perfect for larger projectors or ones with an off-center lens. This mount can be tilted, twisted, and even turned by a series of large easy-to-turn knobs located on the sides. These screws allow for the most precise fine-tuning possible without complication or risk. Need to change a bulb or service your machine? All of your adjustments are safe and sound thanks to a unique easy-release mechanism.
- Weight Capacity: 70lb (31.8kg)
- Max Mounting Pattern: 13.8" (351.5mm) diameter
- Pitch: (up/down) +/- 15°
- Roll (Side to Side): +/- 8°
- Rotation (Yaw): 360°
- Drop Length: 12" - 18"
- Height Adjustment: 1" Increments
- Mounting Surface: Wood Joist, Structural Wood or Structural Concrete (Accessory Required HE4)
- Joist Spacing: Single Joist
- Construction: Aluminum/High-Grade Cold Rolled Steel
- Product Finish: Scratch Resistant Epoxy Powder Coat
- Color: Black
- (1) JKR3-18A Projector Mount
Will this work with my projector?
This will work with most projectors weighing 70 lbs or less.
What is the maximum mounting pattern?
The maximum pattern is 13.8 inches across.
How far down does this hang?
This will extend 12 to 18 inches from the ceiling.
Will I need anything else?
You will need an drill appropriate for your work surface, and you will want a drop cloth to protect your space from debris. Depending on the structure, you may also need drop poles or ceiling adapters.
Do you need a stud to mount this?
Yes, you need a stud or joist for this mount.
Can this be adjusted when it's installed?
Yes, you can adjust this up and down, side to side, and 360 degrees around.