Intellinet Industrial Gigabit High-Power PoE+ Injector, 561365
SKU#: 561365
UPC#:766623561365
Same Day Shipping likely on orders placed in the next 00 hours 00 minutes 00 seconds.
California Prop 65 Warning
For CA Residents Only.
California Proposition 65 Warning
Proposition 65, officially the Safe Drinking Water and Toxic Enforcement Act of 1986, is a law that requires warnings be provided to California consumers when they might be exposed to chemicals identified by California as causing cancer or reproductive toxicity. The warnings are intended to help California consumers make informed decisions about their exposures to these chemicals from the products they use. The California Office of Environmental Health Hazard Assessment (OEHHA) administers the Proposition 65 program and publishes the listed chemicals, which includes more that 850 chemicals. In August 2016, OEHHA adopted new regulations, effective on August 30, 2018, which change the information required in Proposition 65 warnings.
• WARNING: Some cable, plastic, and metal products may contain chemicals known to the state of CA to cause cancer, birth defects, or other reproductive harm.
For further information, please visit www.P65Warnings.ca.gov
- Description+
- Features+
- Full IEEE802.3af, IEEE802.3at compliance
- Up to 30 W of power on two pairs
- Auto-detection of any IEEE802.3af or IEEE802.3at powered device (PD)
- Supports 10/100/1000Base-T applications
- LED indicators for power input and PoE output
- Supports distance up to 100 m (330 ft.)
- DC input 45 – 56 V
- Option for DIN-rail installation
- IP30 slim-type metal case
- ESD protection level of 6 kV
- DCIN port surge-protection level of 8/20 µs, DM/CM 3 kA
- RJ45 port Surge protection level 10/700 µs, DM/CM 6 kV
- Wide operating temperature: -40 – 75? (-40 – 167°F)
- Requires additional industrial power supply (not included)
- Fully NDAA-compliant
- Three-year warranty
- Specs+
- Package Contents+
- Industrial Gigabit High-Power PoE+ Injector
- User manual
- Reviews+
- Full IEEE802.3af, IEEE802.3at compliance
- Up to 30 W of power on two pairs
- Auto-detection of any IEEE802.3af or IEEE802.3at powered device (PD)
- Supports 10/100/1000Base-T applications
- LED indicators for power input and PoE output
- Supports distance up to 100 m (330 ft.)
- DC input 45 – 56 V
- Option for DIN-rail installation
- IP30 slim-type metal case
- ESD protection level of 6 kV
- DCIN port surge-protection level of 8/20 µs, DM/CM 3 kA
- RJ45 port Surge protection level 10/700 µs, DM/CM 6 kV
- Wide operating temperature: -40 – 75? (-40 – 167°F)
- Requires additional industrial power supply (not included)
- Fully NDAA-compliant
- Three-year warranty
- Industrial Gigabit High-Power PoE+ Injector
- User manual
Intellinet Industrial Gigabit High-Power PoE+ Injector
1 x 30 W Port, IEEE 802.3at/af Power over Ethernet (PoE+/PoE), Metal Housing
Get power and data over your existing LAN cable.
The Intellinet Network Solutions Industrial Gigabit High-Power PoE+ Injector connects your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts, enough for most of the common PoE devices.
Reduce Wiring Costs
This smart solution avoids the need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing LAN cabling to deliver DC power as well as transfer data.
Standards
- IEEE 802.3af (Power over Ethernet)
- IEEE 802.3at (High-Power PoE+ Power over Ethernet)
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3ab (Gigabit Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
General
- Media support:
- 100Base-TX UTP/STP RJ45, 8 pin
- 1000Base-T UTP/STP RJ45, 8 pin
- Ports:
- One RJ45 1000 Mbps input port
- One RJ45 1000 Mbps data and power output port
- One DC input (terminal block)
- Compatibility with:
- All IEEE 802.3at- and IEEE 802.3af-compliant PoE devices
Certifications:
- NDAA
- UKCA
- FCC Class A Part 15B
- CE
- EMI
EN 55022
EN 61000-3-2
EN 61000-3-3
- EMS
EN 61000-4-2 (ESD)
EN 61000-4-3 (RS)
EN 61000-4-4 (EFT)
EN 61000-4-5 (Surge)
EN 61000-4-6 (CS)
EN 61000-4-8 (PFMF)
- IEC
60068-2-32 (Free fall)
60068-2-27 (Shock)
60068-2-6 (Vibration)
Power Pin Assignment
- 3/6(+), 1/2(-)
- MODE A power delivery (supplies power as end-span)
LED
- PoE, Power
Power
- DC input: 45.0 – 56.0 V, 0.6 A, 31.0 W
- PoE output: 44.0 – 55.0 V (based on power input), 0.6 A, 30.0 W
Environmental
- Metal housing IP30
- Dimensions: 78 (L) x 32 (W) x 103 (H) [mm] / 3.07 (L) x 1.26 (W) x 4.06 (H) [in]
- Weight: 295 g (0.65 lbs.)
- Operating temperature: -40 – 75°C (-40 – 167°F)
- Operating humidity: 5 – 95% RH, non-condensing
- Storage temperature: -40 – 85°C (-40 – 185°F)
Intellinet Industrial Gigabit High-Power PoE+ Injector
1 x 30 W Port, IEEE 802.3at/af Power over Ethernet (PoE+/PoE), Metal Housing
Get power and data over your existing LAN cable.
The Intellinet Network Solutions Industrial Gigabit High-Power PoE+ Injector connects your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts, enough for most of the common PoE devices.
Reduce Wiring Costs
This smart solution avoids the need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing LAN cabling to deliver DC power as well as transfer data.
Standards
- IEEE 802.3af (Power over Ethernet)
- IEEE 802.3at (High-Power PoE+ Power over Ethernet)
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3ab (Gigabit Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
General
- Media support:
- 100Base-TX UTP/STP RJ45, 8 pin
- 1000Base-T UTP/STP RJ45, 8 pin
- Ports:
- One RJ45 1000 Mbps input port
- One RJ45 1000 Mbps data and power output port
- One DC input (terminal block)
- Compatibility with:
- All IEEE 802.3at- and IEEE 802.3af-compliant PoE devices
Certifications:
- NDAA
- UKCA
- FCC Class A Part 15B
- CE
- EMI
EN 55022
EN 61000-3-2
EN 61000-3-3
- EMS
EN 61000-4-2 (ESD)
EN 61000-4-3 (RS)
EN 61000-4-4 (EFT)
EN 61000-4-5 (Surge)
EN 61000-4-6 (CS)
EN 61000-4-8 (PFMF)
- IEC
60068-2-32 (Free fall)
60068-2-27 (Shock)
60068-2-6 (Vibration)
Power Pin Assignment
- 3/6(+), 1/2(-)
- MODE A power delivery (supplies power as end-span)
LED
- PoE, Power
Power
- DC input: 45.0 – 56.0 V, 0.6 A, 31.0 W
- PoE output: 44.0 – 55.0 V (based on power input), 0.6 A, 30.0 W
Environmental
- Metal housing IP30
- Dimensions: 78 (L) x 32 (W) x 103 (H) [mm] / 3.07 (L) x 1.26 (W) x 4.06 (H) [in]
- Weight: 295 g (0.65 lbs.)
- Operating temperature: -40 – 75°C (-40 – 167°F)
- Operating humidity: 5 – 95% RH, non-condensing
- Storage temperature: -40 – 85°C (-40 – 185°F)
