Garvin Plastic Knockout Insulating Bushing
When you've got a knockout on a metal enclosure or surface, you have the potential for snagged or nicked cables on sharp edges. Enter plastic knockout insulating bushings from Garvin. This cost-effective cable management solution snaps right into place, so pulling cables through won't loosen it. It's available sized for 1/2, 3/4, 1, 1 1/4, and 1 1/2 inch knockouts.
- (1) Garvin Plastic Knockout Bushing in your choice of knockout size
On Sale from $0.35
Arlington Nail On Low Voltage Mounting Bracket for New Construction
Arlington Nail On Low Voltage Mounting Bracket
Install your low voltage cables in a fraction of the time with the Arlington LVN Nail-On Mounting Bracket. The non-metallic, non-conductive, plastic construction makes them perfect for Class 2 networking and audio-video cabling runs. Designed for bare wood studs in new construction areas, these brackets come with a pair of angled captive nails and arrive ready to install. Simply tap the nails into the side of the exposed stud and you’re done.
They include a molded loop for tying off wires and a side tab for added stability. The unique side-fastening nail-in process also increases accuracy by decreasing pushback. The LVN low voltage mounting bracket is for use with standard wallplates and faceplates. These nail-in style boxes are also available in two, three, and four-gang configurations. They are UL listed and CSA rated for low voltage use and are not compatible with electrical wiring.
From $1.37 - $6.64
Garvin Plastic Knockout Bushing, Snap In, Star Configuration
The star configuration of this plastic knockout bushing protects your cables and gives your job a professional, finished look. The bushing is easy to install. No tools are required, as it simply snaps into the knockout hole. The slits allow easy cable management.Package Includes
- (1) Plastic Star Configuration Bushing for your choice of 1/2" or 3/4" Knockout
From $0.58 - $0.71
Arlington Power and Low Voltage Box for Existing Construction
Streamline and simplify your retrofit project with Arlington’s LVDR2. This box allows you to combine one electrical and one low-voltage run into a single location, creating a clean look without any extra work. Designed for use with pre-existing construction, this combo bracket uses flip-up wings to stay fixed against the drywall. The tightening screw is easily accessible from the front of the bracket and the wings can adjust to accommodate drywall, paneling, and other materials up to 1.5” in thickness.
The power side of the LVDR2 includes a connector for Romex or other non-metallic electrical cables. On the low voltage side there are also knock-outs for conduit and raceway cable management covers- one ½” and one ¾”. These UL-listed combination boxes come in a standard two-gang size and can fit a variety of split power and low voltage wall plates for installation convenience.
Arlington Low Voltage Mounting Bracket for New Construction
Mount your wall plates vertically or horizontally with Arlington’s LVH1. These non-metallic brackets are ideal for any Class 2 low voltage cable run including AV and networking applications. Designed for new construction, they attach easily to any standard wood or metal stud. With three mounting hole options, these brackets can be oriented in nearly any position with a minimum of adjustment and no increase in installation time. Sturdy side tabs also help stabilize the bracket against the stud, allowing for a secure assembly.
The LVH1 is compatible with any single gang low voltage wall plate including bulk pass-through, keystone, and even decora-style faceplates. They include a molded tie-off slot for your pre-wiring cabling runs. This bracket is for use with low voltage wiring only and is not compatible with electrical runs.
Arlington Adjustable Depth Mounting Bracket, Single Gang
Arlington’s LVA1 is a single gang low voltage bracket with an adjustable depth to accommodate a wall width up to 1.5 inches. These non-metallic brackets are lightweight, sturdy, and versatile. Used primarily for new construction, they are ideal for installations in which the final wall thickness may not be known or when changes to the wall finish may be made in the future. They mount directly to both wood and metal studs and include side tabs for extra in-wall stabilization.
Adjustments can be made to the LVA1’s depth before or after the final wall finish is complete. The adjustment screw is flush with the bracket but readily accessed by simply removing the wall plate, allowing for changes at any time. Changes can be made with any Phillips head screwdriver. These Class 2 low voltage brackets are compatible with any standard single gang wall plate and will arrive to you pre-set at a typical half-inch depth.
Arlington LVA2 Adjustable Depth Mounting Bracket, Dual Gang
Arlington’s LVA2 is a two-gang low voltage bracket with an adjustable depth to accommodate a wall width up to 1.5 inches. These non-metallic brackets are lightweight, sturdy, and versatile. Used primarily for new construction, they are ideal for installations in which the final wall thickness may not be known or when changes to the wall finish may be made in the future. They mount directly to both wood and metal studs and include side tabs for extra in-wall stabilization.
Adjustments can be made to the LVA2’s depth before or after the final wall finish is complete. The adjustment screw is flush with the bracket but readily accessed by simply removing the wall plate, allowing for changes at any time. Changes can be made with any Phillips head screwdriver. These Class 2 low voltage brackets are compatible with any standard dual gang wall plate and will arrive to you pre-set at a typical half-inch depth.
Garvin G100 Universal Metal Stud Grommet
It's important to protect your low voltage wires against nicks and cuts that can come from the sharp edges of metal studs. These universal metal stud grommets from Garvin are an economical solution to protecting those cables. They don't require any tools to install - simply snap one apart, place inside the standard hole built in to the stud, and snap it back together. You've got an instant routing area for your cables. There is only one size needed to fit the universal cutout, which eliminates the expense and hassle of stocking multiple sizes for different job needs.
- (1) Universal Metal Stud Grommet
Arlington DVFR2W Recessed Indoor InBox for New & Retrofit Construction
Arlington TVB2GW Recessed Wall Box
Arlington's non-metallic recessed indoor InBox allows items such as furniture or televisions to be placed closer to the wall. Arlington's InBox uses mounting wings to attach to the wall, so it is ideal for new or retrofit construction. This two gang 34.0 cubic inch InBox comes in white, is cULus listed, and has a two-hour fire rating. It comes with the recessed box, trim plate, wall plates, low voltage divider, and mounting/installation screws.