Measurements:

• Signal strength (RF energy 950 to 2150 MHz)
• LNB current draw (mA)
• Voltage supplied by the IRD set top box
• Internal battery voltage

Specifications:

• Frequency range: 950 to 2150 MHz
• Impedance: 75 Ω
• Measurable input level: -48 to -8 dBm total power/-60 to -20 dBm per transponder
• Insertion loss: 3 dB (950 to 1450 MHz)/8 dB (1450 to 2150 MHz)
• Size (H x W x D): 6.5" x 2.7" x 1.1", 1.5 lbs
• Temperature range: 0°F to 125°F/(-17°C to +50°C)
• Connectors: Type F female
• Power: Uses IRD power when connected, otherwise uses internal battery. IRD voltage loss through the SAT Buddy is 1.3 V. Current consumed by the SAT Buddy is 90 mA.
• LNB Power from Sat Buddy: Uses internal battery voltage 12 to 16 V, current limited to 400 mA. Able to continuously power a typical LNB (100 to 130 mA) for 1.8 hours.
• Battery: Internal rechargeable 12 cell (1.2 V, 2/3 AA NiCd) 320 mAh, 14.4 V nominal. Automatic shut off when battery voltage drops to 12.0 volts.
• Battery Charge Time: ±10 hours from wall charger
• Wall Charger Output: 12 VDC, 200 mA, center pin positive, 2.1mm I.D.
• Signal Level Display: Bargraph LEDs left row x 10, right row x 1
• Audible Tone: Dual beep rate with solid tone at peak
• LNB Current Draw: 0 to 500 mA (each LED segment is 50 mA)
• LNB Supply Voltage: 10 to 20 volts (each LED segment is 1V, above 9V)

Standard Accessories:

• Padded carrying case with belt clip
• Wall transformer for charging battery, 120V or 240V
• Automobile cigarette-lighter adapter battery charger