Application: Provides an affordable solution for in-wall power for wall mounted HDTV flat screen plasma and LCD TVs.
This video is for installation demonstration purposes only. The actual product may vary from what is seen in the video.
- Provides a complete professional installation solution
- Package that includes:
- Recessed Plug-in A/C Power Outlet (Available in Single or Dual)
- Safety-Designed Recessed Plug-in A/C Power Inlet
- 36" Power Cord
- Two In-Wall PVC Electrical Boxes
Easy and safe to install at the same time as running the A/V cables
Offers a cost-effective way to protect expensive home theater HDTV equipment from surge damage and A/C electrical circuit when connected to a power surge/conditioner
Perfect for retrofit construction projects
Unique recessed power in-let wall plate eliminates the risk of electrical shock
Complies with National Electric Code Requirements
Requires ROMEX electrical wire (not included)
PowerBridge is the only kit ETL Tested & Certified to UL and CSA Standards
Note:This product is not to be hard-wired directly to an electrical circuit. It is designed as an electrical plug-in device to an existing A/C grounded outlet only. This product is rated for use with an existing outlet 15 Amp, 125V grounded circuit only.
Do not put the TV power cord inside the wall or ceiling. Check with your Local Building Jurisdiction, as to permit or code requirements for installing electrical wire and outlets within a wall.
Frequently Asked Questions
and Answers:
Why can't the TV power cord or an extension
cord be run inside the wall?
Extension cords should never be used as a substitute for permanent wiring.
Cords need ventilation to prevent heat buildup, which could cause a fire.
If a fire would result, don't count on home/renters insurance to cover damage.
Never use extension cords on a continuous basis, they are only temporary
solutions for A/C power distribution.
National Electric Code, local building and fire codes restrict the use of
extension cords as permanent use.
The National Electric Code (NEC) states:
NEC ARTICLE 400 Flexible Cords and Cables General 400.1 Scope.
This article covers general requirements, applications, and construction
specifications for flexible cords and flexible cables.
400.8 Uses Not Permitted.
Flexible cords and cables shall not be used for the following:
(1) As a substitute for the fixed wiring of a structure
(2) Run through holes in walls, structural ceilings, suspended ceilings,
dropped ceilings, or floors
(3) Run through doorways, windows, or similar openings
(4) Attached to building surfaces
Exception: Flexible cord and cable shall be permitted to be attached to building
surfaces in accordance with the provisions of 368.8.
(5) Concealed by walls, floors, or ceilings or located above suspended or
dropped ceilings
If I just install a regular outlet behind my
TV, isn't that the same as having the PowerBridge™?
Yes and No... Having a regular A/C outlet/receptacle installed behind your
expensive wall mounted HDTV, will provide A/C power. However, one of the primary
benefits of installing PowerBridge™ In-Wall Power Solution, is the ability to
connect an external Power Surge Protector | Power Conditioner | UPS device to
provide a complete safe protected Power Solution to the HDTV, Home Theater
equipment.
Unless you have a whole-house, main panel protection system installed, all
outlets and switches in your home are un-protected from surge power and "dirty",
noisy power which can reduce the life of electronics and power supplies.
How does PowerBridge™ protect my HDTV and
how is it installed?
PowerBridge™ is part of a A/C Protection and Power Filtering Solution. The
complete system allows for the wiring connection points, as a code compliant
in-wall electrical power extension, of external Power Surge
Protector/Conditioner/UPS devices.
PowerBridge™ design allows A/C 125v power out from the protection device through
the supplied power cord that is plugged into the PowerBridge™ POWER-INLET. The
back of the POWER-INLET is connected with NM (non-metallic) type UL approved
wire*, (Known as Romex®, well known brand of a NM wire manufacturer) approved
for in-wall, permanent wiring.
Romex®, is run to the back of the POWER-OUTLET installed where the HDTV or other
home theater component you want to protect. The POWER-OUTLET receptacle is
recessed, so the usually large plug end of the TV power cord will not interfere
with the TV mounted flush on the wall.
*NM type wire/Romex®, is not included with the PowerBridge System. NM type wire/Romex®,
can be purchased at most hardware or home supply stores, by the foot or in boxes
12', 25', 50' and up.
Can I install this myself or do I need a
professional?
PowerBridge is easy and safe to install, as there is no direct wiring connection
to the electrical panel or circuit or directly hardwired branch connection from
the back of another existing outlet.
Installation instructions are included.
We recommended professional installation if you are not comfortable cutting
holes and running wiring within the walls.
We also recommend checking with your local building jurisdiction regarding any
requirements for running NM wire in a wall/ceiling.
