|
The Atlona 10 gauge speaker cable is for anyone who likes a better sound. Unlike thin cables, thicker cables are capable of handling a much higher amperage. Higher amperage means that the lower frequency transfer capabilities are greatly improved, which results in a much deeper and more responsive bass. In this cable two conductors were place further apart than in most cables to allow a simple attachment to the wall with just nails, unlike with most other cables you have to use small plastic brackets to attach the cable to the wall. Insulation was also greatly improved. PVC and PE insulation was used to improve the cable rigidity. Higher-purity Oxygen Free Copper (OFC) was used to improve the conductivity of the cable, to reduce signal loss and signal degradation, to reduce electric resistance and and to improve overall signal transmission. An Improved multi-strand design will allow a perfect transmission of a full range of audio frequencies, which results in a full, theater like sound. This cable is used primarily to connect speakers to an audio receiver, but can also be used in power cable applications.
Unlike thin cables, thicker cables are capable of handling a much higher amperage. Higher amperage means that the lower frequency transfer capabilities are greatly improved, which results in a much deeper and more responsive bass. Thick wire is capable of travelling further distances than thinner wire because of the lesser resistance to current and therefore reduces voltage drop.
To eliminate cross talk and/or short circuiting or even a potential fire. PVC insulators are also fire retardant in the rare case that a pyre were to form. Keep your signal transmission as well as your house with this speaker wire.
Used to improve the conductivity of the cable, to reduce signal loss and signal degradation, to reduce electric resistance and and to improve overall signal transmission. 50 ft.
Features:
- 10 AWG speaker wire
- 15m (49.5ft) High-Purity Oxygen Free Copper conductors
- Dual insulation made of PVC and PE
- Diameter of a single conductor with jacket is 6mm
- Overall width of the cable is 16mm
- Distance between conductors is 4mm
- Weight of a 15m (49.5ft) roll is 4.75lbs
|
